Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Numerical analysis of the vortex flow effect on the thermal-hydraulic performance of spray dryer

Sinergi · Vol. 26 No. 1 (2022) · hlm. 23–30

DOI
10.22441/sinergi.2022.1.004
ISSN
2460-1217, 1410-2331
Terbit
2022-02-01
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

The use of a spray-dryer is very popular in the drying process in the food and beverage industry. However, due to the properties of the sensitive product that the quality will degrade in drying at high temperature, the innovative design of spray-dryer is developed which can increase the heat transfer rate at moderate temperature. This research was conducted to develop a spray-dryer design to improve thermal-hydraulic performance, with a high transfer rate and low-pressure drop at such a temperature. The design varies by several inlets categorized as design A with one inlet, design B with two inlets, and design C with three inlets. This simulation uses ANSYS FLUENT17, and the independence of the mesh was evaluated to improve the result of the simulation. The efficient mesh number is obtained from the independence of the mesh at around one million. The result shows that design C has the lowest pressure loss and the highest transfer rate due to high vortex and swirl flow generation, improving the mixture quality and direct contact between droplet and dry-air.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 129 tautan kepenulisan bersama · 63 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • Beijing Institute of Technology
  • Muhammadiyah University of Surakarta
  • Muhammadiyah University of Yogyakarta
  • National Taiwan University of Science and Technology
  • Nanjing University of Science and Technology
  • Ungku Omar Polytechnic
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dafit FeriyantoMercu Buana University7
Rikko Putra YouliaMercu Buana University7
Hui XiongBeijing Institute of Technology5
Aberham Genetu FelekeBeijing Institute of Technology4
Wiwit SuprihatiningsihMercu Buana University4
Hadi PranotoMercu Buana University3
L. B. Desti DorionNanjing University of Science and Technology3
Muhamad FitriMercu Buana University2
Nurato NuratoMercu Buana University2
Supaat ZakariaUngku Omar Polytechnic2
Solli Dwi MurtyasKyushu University2
Hanif GhufronMercu Buana University2
Andi Firdaus SudarmaMercu Buana University2
Hifdzul Luthfan HabibullahMercu Buana University2
Muhammad NadjibMuhammadiyah University of Yogyakarta2
Wahyudi WahyudiMuhammadiyah University of Yogyakarta2
Fathoni Putra WijayaAfiliasi tidak diketahui2
Dong WangBeijing Institute of Technology2
Nur IndahNational University of Malaysia1
Rachmat MuwardiMercu Buana University1
Imam HidayatMercu Buana University1
Muhammad ImranBeijing Institute of Technology1
Marwan EffendyMuhammadiyah University of Surakarta1
Daru SugatiInstitut Teknologi Nasional Yogyakarta1
Amat Agus SalimMuhammadiyah University of Surakarta1
Nanang RuhyatMercu Buana University1
Diah UtamiMercu Buana University1
Yang XiaweiNorthwestern Polytechnical University1
Yudha Aji PramonoMercu Buana University1
Muhammad ImranBeijing Institute of Technology1
Himawan S. WibisonoMercu Buana University1
Agung Wahyudi BiantoroMercu Buana University1
Tri Wahyu AdinartoMercu Buana University1
Fatkur RachmanuPoliteknik Enjinering Indorama1
Imam HidayatMercu Buana University1
S.S. AbdulmalikAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Numerical analysis of the vortex flow effect on the thermal-hydraulic performance of spray dryer</dc:title>
	<dc:creator>Anggara, Fajar</dc:creator>
	<dc:creator>Romahadi, Dedik</dc:creator>
	<dc:creator>Avicenna, Alief Luthfie</dc:creator>
	<dc:creator>Irawan, Yosua Heru</dc:creator>
	<dc:subject xml:lang="en-US">CFD</dc:subject>
	<dc:subject xml:lang="en-US">Drying Process</dc:subject>
	<dc:subject xml:lang="en-US">Sensitive Product</dc:subject>
	<dc:subject xml:lang="en-US">Spray-Dryer</dc:subject>
	<dc:subject xml:lang="en-US">Thermal-Hydraulic</dc:subject>
	<dc:subject xml:lang="en-US">Vortex Flow</dc:subject>
	<dc:description xml:lang="en-US">The use of a spray-dryer is very popular in the drying process in the food and beverage industry. However, due to the properties of the sensitive product that the quality will degrade in drying at high temperature, the innovative design of spray-dryer is developed which can increase the heat transfer rate at moderate temperature. This research was conducted to develop a spray-dryer design to improve thermal-hydraulic performance, with a high transfer rate and low-pressure drop at such a temperature. The design varies by several inlets categorized as design A with one inlet, design B with two inlets, and design C with three inlets. This simulation uses ANSYS FLUENT17, and the independence of the mesh was evaluated to improve the result of the simulation. The efficient mesh number is obtained from the independence of the mesh at around one million. The result shows that design C has the lowest pressure loss and the highest transfer rate due to high vortex and swirl flow generation, improving the mixture quality and direct contact between droplet and dry-air. </dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2022-02-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/11437</dc:identifier>
	<dc:identifier>10.22441/sinergi.2022.1.004</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 26 No. 1 (2022); 23-30</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/11437/5456</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/11437/11031</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 SINERGI</dc:rights>
</oai_dc:dc>