Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Post-Irradiation Mechanical Properties Prediction of Al 6070 of MTR-Fuel Bundle for Cutting Process

Sinergi · Vol. 26 No. 2 (2022) · hlm. 257–264

DOI
10.22441/sinergi.2022.2.015
ISSN
2460-1217, 1410-2331
Terbit
2022-06-25
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

The Al 6070 is the side plate material of the MTR-fuel plate bundle. These post-irradiation mechanical properties will be used in the side plate cutting process to obtain certain plates from the MTR-fuel plate bundle. This activity is part of a series of post-irradiation test processes from the MTR-fuel plate bundle in order to determine its performance. After testing in the form of a bundle (assembly), then continued testing of certain plates from the bundle. Disassembly of the plate is carried out by cutting along the two side plates (aluminum alloy) that clamp the plate. The mechanical properties of the workpiece material are important factors that affect the conditions of the machining (cutting) process. Prediction of post-irradiation mechanical properties was carried out using the change percentage of before and after irradiation of other aluminum alloys. The prediction carried out with the Si transmutation as the dominant one affects the post-irradiation mechanical properties changes in aluminum alloys. The change percentage added the mechanical properties of the pre-irradiated side plate material of the MTR-fuel plate bundle. Pre-irradiation testing of the Al 6070, namely chemical composition tests, pre-irradiation mechanical properties tests, including hardness tests (micro), and tensile tests (max stress, yield stress, and % elongation). Prediction of changes in mechanical properties of side plate material (aluminum alloy, Al 6070) before irradiation, compared to after irradiation is: hardness value from 98.51 to 127 (gf/µm2), tensile strength from 265.371 to 398 (N/mm2), the yield strength from 204.2 to 306 N/mm2.

Kata kunci

Jaringan kolaborasi para penulis

32 penulis · 126 tautan kepenulisan bersama · 87 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • National Research and Innovation Agency
  • State University of Jakarta
  • Nasional University
  • Atma Jaya Catholic University of Indonesia
  • University of Indonesia
  • Ungku Omar Polytechnic
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dafit FeriyantoMercu Buana University4
Dwi NantoSyarif Hidayatullah State Islamic University Jakarta2
Ferry Budhi SusetyoState University of Jakarta2
Sigit Dwi YudantoNational Research and Innovation Agency2
Basori BasoriNasional University2
Daniel EdbertAtma Jaya Catholic University of Indonesia2
Evi Ulina Margaretha SitumorangAtma Jaya Catholic University of Indonesia2
Cahaya RosyidanUniversitas Trisakti2
Abdul HamidPoliteknik Negeri Madura2
Hadi PranotoMercu Buana University2
Dedik RomahadiMercu Buana University2
Nurato NuratoMercu Buana University2
Bambang SoegijonoUniversity of Indonesia1
Syamsuir SyamsuirState University of Jakarta1
RuliyantaNasional University1
Rosika KriswariniNational Research and Innovation Agency1
Heri HardiyantiNational Research and Innovation Agency1
Anawati AnawatiUniversity of Indonesia1
Sabaruddin HarahapAfiliasi tidak diketahui1
Abdul AzizUniversitas Negeri Padang1
Swandya Eka PratiwiAfiliasi tidak diketahui1
Andi AdriansyahMercu Buana University1
Abdi WahabMercu Buana University1
Imam HidayatMercu Buana University1
S.S. AbdulmalikAfiliasi tidak diketahui1
Alfian NoviyantoMercu Buana University1
Hadi PranotoMercu Buana University1
Samir Sani AbdulmalikNigerian Army University Biu1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Post-Irradiation Mechanical Properties Prediction of Al 6070 of MTR-Fuel Bundle for Cutting Process</dc:title>
	<dc:creator>Hutagaol, Antonio Gogo</dc:creator>
	<dc:creator>Hidayat, Imam</dc:creator>
	<dc:creator>Ajiriyanto, Maman Kartaman</dc:creator>
	<dc:creator>Zakaria, Supaat</dc:creator>
	<dc:subject xml:lang="en-US">Mechanical Properties</dc:subject>
	<dc:subject xml:lang="en-US">MTR-Fuel Plate</dc:subject>
	<dc:subject xml:lang="en-US">Nuclear Research Reactor</dc:subject>
	<dc:subject xml:lang="en-US">Post Irradiation Examination</dc:subject>
	<dc:description xml:lang="en-US">The Al 6070 is the side plate material of the MTR-fuel plate bundle. These post-irradiation mechanical properties will be used in the side plate cutting process to obtain certain plates from the MTR-fuel plate bundle. This activity is part of a series of post-irradiation test processes from the MTR-fuel plate bundle in order to determine its performance. After testing in the form of a bundle (assembly), then continued testing of certain plates from the bundle. Disassembly of the plate is carried out by cutting along the two side plates (aluminum alloy) that clamp the plate. The mechanical properties of the workpiece material are important factors that affect the conditions of the machining (cutting) process. Prediction of post-irradiation mechanical properties was carried out using the change percentage of before and after irradiation of other aluminum alloys. The prediction carried out with the Si transmutation as the dominant one affects the post-irradiation mechanical properties changes in aluminum alloys. The change percentage added the mechanical properties of the pre-irradiated side plate material of the MTR-fuel plate bundle. Pre-irradiation testing of the Al 6070, namely chemical composition tests, pre-irradiation mechanical properties tests, including hardness tests (micro), and tensile tests (max stress, yield stress, and % elongation). Prediction of changes in mechanical properties of side plate material (aluminum alloy, Al 6070) before irradiation, compared to after irradiation is: hardness value from 98.51 to 127 (gf/µm2), tensile strength from 265.371 to 398 (N/mm2), the yield strength from 204.2 to 306 N/mm2.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2022-06-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/13473</dc:identifier>
	<dc:identifier>10.22441/sinergi.2022.2.015</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 26 No. 2 (2022); 257-264</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/13473/5787</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/13473/11185</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 SINERGI</dc:rights>
</oai_dc:dc>