Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Defect classification of radius shaping in the tire curing process using Fine-Tuned Deep Neural Network

Sinergi · Vol. 26 No. 3 (2022) · hlm. 335–342

DOI
10.22441/sinergi.2022.3.009
ISSN
2460-1217, 1410-2331
Terbit
2022-10-06
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

The curing process or vulcanization process is the final stage of the tire manufacturing process, where the properties of the tire compound change from rubber-plastic material to become elastic by forming cross-links in its molecular structure. The green tire is formed in the curing process, which is placed on the bottom mould. The inside of the green tire surrounds the bladder. The top mould will close to carry out the next curing process. In closing the mould, there is a shaping process of forming a green tire placed on the bladder and given a proportional pressure. Improper or abnormal radius shaping results cause seventy percent of product defects. This paper proposed abnormal detection of radius shaping in the curing process using Fine-tuned Deep Neural Network (DNN). Several DNN models have been examined to analyze an optimized DNN model for abnormal detection of radius shaping in the curing process. The fine-tuned DNN architecture has been exported for the curing system. The DNN was trained with a training accuracy of 97.88%, a validation accuracy of 95%, a testing accuracy of 100%, and a loss of 4.93%.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 63 tautan kepenulisan bersama · 36 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mercu Buana University
  • Beijing Institute of Technology
  • Jakarta State Polytechnic
  • Universitas Esa Unggul
  • Kigali Independent University
  • National Defence University of Malaysia
  • Bandung Institute of Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Trie Maya KadarinaMercu Buana University3
Mirna YunitaBeijing Institute of Technology2
Muhammad Imam MuthahharMercu Buana University2
Asif KhanBeijing Institute of Technology2
Eko IhsantoMercu Buana University1
Fina SupeginaMercu Buana University1
Andi AdriansyahMercu Buana University1
Sabin HitimanaKigali Independent University1
Rachmat MuwardiMercu Buana University1
Khoirul AzizMercu Buana University1
Inggis Kurnia TrisiawanMercu Buana University1
Kadek Dwi SuyasminiMercu Buana University1
Rinto PriambodoMercu Buana University1
Riandini RiandiniJakarta State Polytechnic1
Sulis SetiowatiJakarta State Polytechnic1
Rika Novita WardhaniJakarta State Polytechnic1
Mohd Taufik JusohNational Defence University of Malaysia1
Muhammad Fadhlillah Raisul AkbarMercu Buana University1
Muhammad Iqbal MaulanaMercu Buana University1
Ketty Siti SalamahMercu Buana University1
Arrival Dwi SentosaBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Defect classification of radius shaping in the tire curing process using Fine-Tuned Deep Neural Network</dc:title>
	<dc:creator>Iklima, Zendi</dc:creator>
	<dc:creator>Nur Rohman, Bugi</dc:creator>
	<dc:creator>Muwardi, Rahmat</dc:creator>
	<dc:creator>Khan, Asif</dc:creator>
	<dc:creator>Arifiansyah, Zody</dc:creator>
	<dc:subject xml:lang="en-US">Abnormal Detection</dc:subject>
	<dc:subject xml:lang="en-US">Deep Neural Network</dc:subject>
	<dc:subject xml:lang="en-US">Fined Tuned</dc:subject>
	<dc:subject xml:lang="en-US">Radius Shaping</dc:subject>
	<dc:description xml:lang="en-US">The curing process or vulcanization process is the final stage of the tire manufacturing process, where the properties of the tire compound change from rubber-plastic material to become elastic by forming cross-links in its molecular structure. The green tire is formed in the curing process, which is placed on the bottom mould. The inside of the green tire surrounds the bladder. The top mould will close to carry out the next curing process. In closing the mould, there is a shaping process of forming a green tire placed on the bladder and given a proportional pressure. Improper or abnormal radius shaping results cause seventy percent of product defects. This paper proposed abnormal detection of radius shaping in the curing process using Fine-tuned Deep Neural Network (DNN). Several DNN models have been examined to analyze an optimized DNN model for abnormal detection of radius shaping in the curing process. The fine-tuned DNN architecture has been exported for the curing system. The DNN was trained with a training accuracy of 97.88%, a validation accuracy of 95%, a testing accuracy of 100%, and a loss of 4.93%.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2022-10-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14331</dc:identifier>
	<dc:identifier>10.22441/sinergi.2022.3.009</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 26 No. 3 (2022); 335-342</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14331/6099</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14331/11225</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14331/11226</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14331/11228</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 SINERGI</dc:rights>
</oai_dc:dc>