Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Taguchi-based design of experiments to optimize the parameters of Hydrogen-Hydrogen-Oxygen based welding

Sinergi · Vol. 26 No. 3 (2022) · hlm. 343–354

DOI
10.22441/sinergi.2022.3.010
ISSN
2460-1217, 1410-2331
Terbit
2022-10-08
Penerbit
Universitas Mercu Buana
Bahasa
eng

Abstrak

This study discusses the design of a hydrogen-hydrogen-oxygen (HHO) based welding tool, which uses the concept of water electrolysis through a dry cell generator. To determine the optimal design of the HHO dry cell generator, a design experiment was carried out using the Taguchi method by taking into account several parameters, namely the configuration of the electrode plate, the duty cycle Pulse Width Modulation (PWM), the type of catalyst, the electrolyte concentration, and the thickness of the gasket of the electrode plate. Each parameter is varied in 4 levels so that 16 kinds of experiments are obtained with an orthogonal array. In addition, the Combustion temperature data was collected after determining the optimal design. The experimental results show that this HHO-based welding tool is able to produce an average temperature reach of 1063.85 °C.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 44 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Mercu Buana University
  • Tun Hussein Onn University of Malaysia
  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fredina DestyoriniIndonesian Institute of Sciences1
Yuyun IrmawatiIndonesian Institute of Sciences1
Henry WidodoIndonesian Institute of Sciences1
Nanik IndayaningsihIndonesian Institute of Sciences1
Jarot RaharjoAfiliasi tidak diketahui1
Ade Utami HapsariAfiliasi tidak diketahui1
Retna Deca PravitasariAfiliasi tidak diketahui1
Hanif YulianiAfiliasi tidak diketahui1
Damisih DamisihAfiliasi tidak diketahui1
Aghni Ulma SaudiAfiliasi tidak diketahui1
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia1
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia1
Triyanto PangaribowoMercu Buana University1
Abdul Hamid BudimanNational Research and Innovation Agency1
Bambang MulyantoMercu Buana University1
Dani Tri WahyudiIndonesian Institute of Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Taguchi-based design of experiments to optimize the parameters of Hydrogen-Hydrogen-Oxygen based welding</dc:title>
	<dc:creator>Fajarwati, Desi</dc:creator>
	<dc:creator>Khaerudini, Deni Shidqi</dc:creator>
	<dc:subject xml:lang="en-US">Dry cell</dc:subject>
	<dc:subject xml:lang="en-US">HHO</dc:subject>
	<dc:subject xml:lang="en-US">Taguchi</dc:subject>
	<dc:subject xml:lang="en-US">Welding</dc:subject>
	<dc:description xml:lang="en-US">This study discusses the design of a hydrogen-hydrogen-oxygen (HHO) based welding tool, which uses the concept of water electrolysis through a dry cell generator. To determine the optimal design of the HHO dry cell generator, a design experiment was carried out using the Taguchi method by taking into account several parameters, namely the configuration of the electrode plate, the duty cycle Pulse Width Modulation (PWM), the type of catalyst, the electrolyte concentration, and the thickness of the gasket of the electrode plate. Each parameter is varied in 4 levels so that 16 kinds of experiments are obtained with an orthogonal array. In addition, the Combustion temperature data was collected after determining the optimal design. The experimental results show that this HHO-based welding tool is able to produce an average temperature reach of 1063.85 °C.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2022-10-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/msword</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14374</dc:identifier>
	<dc:identifier>10.22441/sinergi.2022.3.010</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 26 No. 3 (2022); 343-354</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14374/6151</dc:relation>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/14374/11229</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 SINERGI</dc:rights>
</oai_dc:dc>