Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Influence of lemon skin powder on the mechanical and thermal properties of polyvinyl alcohol (PVA)/cassava starch biocomposites prepared by solution casting method

Sinergi · Vol. 30 No. 2 (2026) · hlm. 361–370

DOI
10.22441/sinergi.2026.2.004
ISSN
2460-1217, 1410-2331
Terbit
2026-06-03
Penerbit
Universitas Mercu Buana
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

More environmentally friendly alternative materials are needed to replace synthetic plastics to prevent environmental pollution. One biocomposite, a mixture of polyvinyl alcohol (PVA) and cassava starch, is an appropriate solution; however, its mechanical properties are low. Lemon skin, which is often considered waste, contains promising cellulose and phenolic extract content, making it a potential superior and functional filler for biocomposites, particularly in active packaging applications. This study presents an investigation into the use of lemon skin powder (LSP) as a filler for PVA- and cassava starch-based biocomposites. The biocomposites were prepared using the solvent casting method by varying the concentration of lemon skin powder filler, namely 0%, 1%, 3%, and 5%, with the final product being a film. Analysis was carried out on the mechanical properties, morphology (Scanning Electron Microscopy (SEM)), and thermal properties of the film. The results show that the mechanical properties of the film increased when LSP was added, with the highest tensile strength of 13.82 MPa for biocomposite films containing 5% LSP compared to the tensile strength of pure PVA and PVA/cassava starch blends. In addition, the thermal properties of biocomposites also increased at this content, as evidenced by an increase in the initial decomposition temperature. Specifically, the initial decomposition temperature of pure PVA, which was 204°C, increased to 214°C in biocomposites with 5% LSP. This improvement in thermal properties and tensile strength can be attributed to the strong interfacial bonding between the filler and the matrix, which contributes to the overall compact structure of the biocomposite. Morphological observations confirm the increased interface interaction and uniformity of filler distribution in the composite. These results confirm that lemon skin fibers have positive potential as reinforcements for PVA and cassava starch-based biocomposites, particularly in food packaging applications.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 85 tautan kepenulisan bersama · 11 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Universitas Jember
  • Universitas Jambi
  • Hasanuddin University
  • Universitas Muhammadiyah Semarang
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Adrian TawaiUniversitas Halu Oleo8
La Ode Muhammad ElwanUniversitas Halu Oleo3
La Ode AslimUniversitas Halu Oleo3
Dian Arisandy Eka Putra SembiringUniversitas Jambi3
Sartono SartonoUniversitas Halu Oleo2
Liwaul LiwaulUniversitas Halu Oleo2
Nur Fitriani Usdyana AtthamidAfiliasi tidak diketahui2
Sri IndriatiAfiliasi tidak diketahui2
Robi HendraUniversitas Jambi2
Nasrul IlminnafikUniversitas Jember2
Muh Nurkoyim KustantoUniversitas Jember2
Isnawaty IsnawatyAfiliasi tidak diketahui1
Rahmat RamadhanUniversitas Halu Oleo1
la ode Maksar MuhurunaAfiliasi tidak diketahui1
Ambo AkoHasanuddin University1
Ayi Nur FauziahUniversitas Halu Oleo1
Muhammad AmirUniversitas Halu Oleo1
Saidin SaidinUniversitas Halu Oleo1
Sahiruddin SahiruddinHasanuddin University1
Djoni Prawira RahardjaAfiliasi tidak diketahui1
Abdul Latif TolengAfiliasi tidak diketahui1
Rika HaryaniAfiliasi tidak diketahui1
mawardi A. Asja ZulkarnaimAfiliasi tidak diketahui1
Taufik TaufikUniversitas Halu Oleo1
Eka SuaibUniversitas Halu Oleo1
Amrullah AmrullahUniversitas Islam Negeri Ar-Raniry1
Alim BahriAfiliasi tidak diketahui1
Ilham IlhamAfiliasi tidak diketahui1
Ratu KhumaerahAfiliasi tidak diketahui1
Muh AmirAfiliasi tidak diketahui1
La Ode Muhammad ElwanAfiliasi tidak diketahui1
Fitria FitriaAfiliasi tidak diketahui1
Cindy Clara WidianiAfiliasi tidak diketahui1
HardiwinotoUniversitas Muhammadiyah Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of lemon skin powder on the mechanical and thermal properties of polyvinyl alcohol (PVA)/cassava starch biocomposites prepared by solution casting method</dc:title>
	<dc:creator>Junus, Salahuddin</dc:creator>
	<dc:creator>Pradiza, Revvan Rifada</dc:creator>
	<dc:creator>Yusuf, Muhammad</dc:creator>
	<dc:creator>Darsin, Mahros</dc:creator>
	<dc:creator>Jatisukamto, Gaguk</dc:creator>
	<dc:creator>Asrofi, Mochamad</dc:creator>
	<dc:subject xml:lang="en-US">Biocomposites</dc:subject>
	<dc:subject xml:lang="en-US">Cassava Starch</dc:subject>
	<dc:subject xml:lang="en-US">Lemon Skin</dc:subject>
	<dc:subject xml:lang="en-US">Mechanical Properties</dc:subject>
	<dc:subject xml:lang="en-US">Polyvinyl Alcohol</dc:subject>
	<dc:subject xml:lang="en-US">Thermal Properties</dc:subject>
	<dc:description xml:lang="en-US">More environmentally friendly alternative materials are needed to replace synthetic plastics to prevent environmental pollution. One biocomposite, a mixture of polyvinyl alcohol (PVA) and cassava starch, is an appropriate solution; however, its mechanical properties are low. Lemon skin, which is often considered waste, contains promising cellulose and phenolic extract content, making it a potential superior and functional filler for biocomposites, particularly in active packaging applications. This study presents an investigation into the use of lemon skin powder (LSP) as a filler for PVA- and cassava starch-based biocomposites. The biocomposites were prepared using the solvent casting method by varying the concentration of lemon skin powder filler, namely 0%, 1%, 3%, and 5%, with the final product being a film.  Analysis was carried out on the mechanical properties, morphology (Scanning Electron Microscopy (SEM)), and thermal properties of the film. The results show that the mechanical properties of the film increased when LSP was added, with the highest tensile strength of 13.82 MPa for biocomposite films containing 5% LSP compared to the tensile strength of pure PVA and PVA/cassava starch blends. In addition, the thermal properties of biocomposites also increased at this content, as evidenced by an increase in the initial decomposition temperature. Specifically, the initial decomposition temperature of pure PVA, which was 204°C, increased to 214°C in biocomposites with 5% LSP. This improvement in thermal properties and tensile strength can be attributed to the strong interfacial bonding between the filler and the matrix, which contributes to the overall compact structure of the biocomposite. Morphological observations confirm the increased interface interaction and uniformity of filler distribution in the composite. These results confirm that lemon skin fibers have positive potential as reinforcements for PVA and cassava starch-based biocomposites, particularly in food packaging applications.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2026-06-03</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/33532</dc:identifier>
	<dc:identifier>10.22441/sinergi.2026.2.004</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 30 No. 2 (2026); 361-370</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/33532/12480</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 SINERGI</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>