Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Supercooling reduction in water-based PCMs using soya oil ester: thermal characterization and nucleation analysis

Sinergi · Vol. 30 No. 3 (2026) · hlm. 747–758

DOI
10.22441/sinergi.2026.3.006
ISSN
2460-1217, 1410-2331
Terbit
2026-10-12
Penerbit
Universitas Mercu Buana
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Water-based phase change materials (PCMs) are attractive for low-temperature thermal energy storage due to their high latent heat; however, their application is limited by severe supercooling caused by inefficient nucleation. This study evaluates the nucleation efficiency of soya oil ester as an additive for reducing supercooling of water-based PCMs. PCM samples were prepared with soya oil ester concentrations of 10%, 12.5%, 15%, and 17.5% by weight, each with a total mass of 100 g. Thermal characterization was performed using Differential Scanning Calorimetry (DSC) and the T-history method. DSC measurements were conducted in triplicate for each composition, while T-history tests employed parallel samples under identical cooling conditions. The temperature and enthalpy uncertainties of the DSC system were ±0.1 °C and ±2%, respectively, and the thermocouples used in the T-history setup exhibited an uncertainty of ±0.5 °C. The results show a substantial improvement in nucleation efficiency, with supercooling reduced from 7.5 °C in pure water to 1.2, 0.8, 0.5, and 0.2 °C for ester concentrations of 10%, 12.5%, 15%, and 17.5%, corresponding to a suppression efficiency of up to 97.3%. The freezing onset temperature increased from −19.5 °C to −12.0 °C, indicating enhanced heterogeneous nucleation. Crystallization shifted from multi-step behavior in pure water to a single, reproducible event in modified PCMs. Although latent heat decreased slightly, it remained suitable for cold thermal energy storage. Overall, soya oil ester significantly improves nucleation performance and thermal reliability of water-based PCMs.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 51 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pembangunan Nasional Veteran Jakarta
  • Muhammadiyah University of Surakarta
  • Politeknik Negeri Bali
  • University of Sarjanawiyata Tamansiswa
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
James JulianUniversitas Pembangunan Nasional Veteran Jakarta1
Fitri WahyuniUniversitas Pembangunan Nasional Veteran Jakarta1
Annastya Bagas DewantaraUniversitas Pembangunan Nasional Veteran Jakarta1
Nandy PutraAfiliasi tidak diketahui1
Willy Satrio NugrohoAfiliasi tidak diketahui1
I Nyoman Gede WardanaAfiliasi tidak diketahui1
Ni Made DwidianiAfiliasi tidak diketahui1
Ngakan Putu Gede SuardanaAfiliasi tidak diketahui1
Wayan Nata SeptiadiAfiliasi tidak diketahui1
I Gusti Ngurah Nitya SanthiarsaAfiliasi tidak diketahui1
Si Putu Gede Gunawan TistaAfiliasi tidak diketahui1
Marwan EffendyMuhammadiyah University of Surakarta1
Dody Bimo AjiUniversity of Sarjanawiyata Tamansiswa1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Supercooling reduction in water-based PCMs using soya oil ester: thermal characterization and nucleation analysis</dc:title>
	<dc:creator>Rasta, I Made</dc:creator>
	<dc:creator>Suamir, I Nyoman</dc:creator>
	<dc:creator>Puja, I Gusti Ketut</dc:creator>
	<dc:creator>Ngafwan, Ngafwan</dc:creator>
	<dc:creator>Winarta, Adi</dc:creator>
	<dc:subject xml:lang="en-US">Bio-based PCMs</dc:subject>
	<dc:subject xml:lang="en-US">Phase Change Materials</dc:subject>
	<dc:subject xml:lang="en-US">Soya oil ester</dc:subject>
	<dc:subject xml:lang="en-US">Supercooling reduction</dc:subject>
	<dc:subject xml:lang="en-US">Thermal energy storage</dc:subject>
	<dc:description xml:lang="en-US">Water-based phase change materials (PCMs) are attractive for low-temperature thermal energy storage due to their high latent heat; however, their application is limited by severe supercooling caused by inefficient nucleation. This study evaluates the nucleation efficiency of soya oil ester as an additive for reducing supercooling of water-based PCMs. PCM samples were prepared with soya oil ester concentrations of 10%, 12.5%, 15%, and 17.5% by weight, each with a total mass of 100 g. Thermal characterization was performed using Differential Scanning Calorimetry (DSC) and the T-history method. DSC measurements were conducted in triplicate for each composition, while T-history tests employed parallel samples under identical cooling conditions. The temperature and enthalpy uncertainties of the DSC system were ±0.1 °C and ±2%, respectively, and the thermocouples used in the T-history setup exhibited an uncertainty of ±0.5 °C. The results show a substantial improvement in nucleation efficiency, with supercooling reduced from 7.5 °C in pure water to 1.2, 0.8, 0.5, and 0.2 °C for ester concentrations of 10%, 12.5%, 15%, and 17.5%, corresponding to a suppression efficiency of up to 97.3%. The freezing onset temperature increased from −19.5 °C to −12.0 °C, indicating enhanced heterogeneous nucleation. Crystallization shifted from multi-step behavior in pure water to a single, reproducible event in modified PCMs. Although latent heat decreased slightly, it remained suitable for cold thermal energy storage. Overall, soya oil ester significantly improves nucleation performance and thermal reliability of water-based PCMs.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2026-10-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/34650</dc:identifier>
	<dc:identifier>10.22441/sinergi.2026.3.006</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 30 No. 3 (2026); 747-758</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/34650/12790</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 SINERGI</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>