Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Stage-dependent sensitivity analysis of composite floor systems under Eurocode provisions

Sinergi · Vol. 30 No. 3 (2026) · hlm. 805–814

DOI
10.22441/sinergi.2026.3.009
ISSN
2460-1217, 1410-2331
Terbit
2026-09-08
Penerbit
Universitas Mercu Buana
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Composite floor systems, which combine profiled steel decks and reinforced concrete slabs, are widely used in modern construction owing to their structural efficiency, construction speed, and material economy. However, the relative influence of key design parameters on structural performance remains insufficiently understood. This study investigates the effects of steel deck thickness, slab thickness, and concrete compressive strength to identify the governing parameters that control the composite floor behavior. A representative one-way composite floor system with CF60 profiled steel decking and a reinforced concrete topping was analyzed using a Eurocode-based analytical parametric approach. The analysis considered both the construction stage, in which the steel deck alone resisted the applied loads, and the composite stage, in which the hardened concrete slab and steel deck acted compositely. Parametric combinations were generated by varying deck thickness, slab depth, and concrete compressive strength, and structural performance was evaluated using demand–capacity ratios derived from Eurocode flexural resistance formulations. The results show that the composite floor behavior is primarily governed by construction-stage performance, with the steel deck thickness emerging as the dominant parameter. The slab thickness exhibited a stage-dependent influence, whereas the concrete compressive strength within the normal-strength range had only a minor effect. This study established a quantitative sensitivity hierarchy for geometric and material parameters under Eurocode design conditions. The analysis was limited to a code-based analytical framework without numerical or experimental validation.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 19 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Binus University
  • University of Babylon
  • Murdoch University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Juliastuti JuliastutiBinus University3
M. AndaMurdoch University3
Maya Devina KurniawanBinus University1
I Gede Mahardika SusilaBinus University1
Andryan SuhendraBinus University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Stage-dependent sensitivity analysis of composite floor systems under Eurocode provisions</dc:title>
	<dc:creator>Suwondo, Riza</dc:creator>
	<dc:creator>Suangga, Made</dc:creator>
	<dc:creator>Keintjem, Militia</dc:creator>
	<dc:creator>Altaee, Mohammed</dc:creator>
	<dc:subject xml:lang="en-US">Composite floor system</dc:subject>
	<dc:subject xml:lang="en-US">Compressive strength</dc:subject>
	<dc:subject xml:lang="en-US">Sustainable design</dc:subject>
	<dc:subject xml:lang="en-US">Slab thickness</dc:subject>
	<dc:subject xml:lang="en-US">Steel deck</dc:subject>
	<dc:description xml:lang="en-US">Composite floor systems, which combine profiled steel decks and reinforced concrete slabs, are widely used in modern construction owing to their structural efficiency, construction speed, and material economy. However, the relative influence of key design parameters on structural performance remains insufficiently understood. This study investigates the effects of steel deck thickness, slab thickness, and concrete compressive strength to identify the governing parameters that control the composite floor behavior. A representative one-way composite floor system with CF60 profiled steel decking and a reinforced concrete topping was analyzed using a Eurocode-based analytical parametric approach. The analysis considered both the construction stage, in which the steel deck alone resisted the applied loads, and the composite stage, in which the hardened concrete slab and steel deck acted compositely. Parametric combinations were generated by varying deck thickness, slab depth, and concrete compressive strength, and structural performance was evaluated using demand–capacity ratios derived from Eurocode flexural resistance formulations. The results show that the composite floor behavior is primarily governed by construction-stage performance, with the steel deck thickness emerging as the dominant parameter. The slab thickness exhibited a stage-dependent influence, whereas the concrete compressive strength within the normal-strength range had only a minor effect. This study established a quantitative sensitivity hierarchy for geometric and material parameters under Eurocode design conditions. The analysis was limited to a code-based analytical framework without numerical or experimental validation.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2026-09-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/36181</dc:identifier>
	<dc:identifier>10.22441/sinergi.2026.3.009</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 30 No. 3 (2026); 805-814</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/36181/12746</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 SINERGI</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>