Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Synergistic effects of low-cost graphene and coal fly ash on the strength–porosity performance of cellular lightweight concrete

Sinergi · Vol. 30 No. 3 (2026) · hlm. 1023–1036

DOI
10.22441/sinergi.2026.3.025
ISSN
2460-1217, 1410-2331
Terbit
2026-10-06
Penerbit
Universitas Mercu Buana
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Cellular lightweight concrete (CLC) is attractive for envelope and infill applications due to its low density and low thermal and sound insulation. However, its high pore volume often reduces compressive strength and limits wider application. Graphene-based additives and fly ash have been widely studied in cementitious composites. However, their combined effect in low-density CLC remains insufficiently understood, particularly regarding the strength-porosity balance, cellular pore stability, and microstructural mechanism. This study investigated the synergistic effect of low-cost graphene produced by turbulence-assisted shear exfoliation (TASE) and coal fly ash on CLC with a target density of approximately 1.1 g·cm⁻³. TASE graphene was selected because its aqueous shear-exfoliation route offered lower processing complexity, better scalability, and stronger cost potential than many commercial or oxidized graphene derivatives, making it more suitable for large-volume cementitious applications. CLC mixtures containing 0–15 wt.% graphene and 0 or 5 wt.% fly ash were cast and cured for 14 and 28 days. Compressive strength, porosity, and microstructure (SEM/TEM) were evaluated. Among the investigated mixtures, the mixture containing 10 wt.% graphene and 5 wt.% fly ash produced the best strength–porosity performance, achieving the highest 28-day compressive strength of 1.86 ± 0.20 MPa and the lowest porosity of 23.70%. Compared with the graphene-free mixture at the same fly ash level, this composition increased strength by 64.60% and reduced porosity by 14.84%. SEM/TEM observations supported a dosage-dependent mechanism involving graphene-assisted nucleation, fly ash-assisted pozzolanic densification, pore-wall refinement, and reduced reinforcement efficiency at excessive graphene loading. These findings supported the practical design of graphene–fly ash modified CLC material systems.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 182 tautan kepenulisan bersama · 95 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Riau University
  • Murdoch University
  • University of Baghdad
  • M. Kh Dulati Taraz State University
  • Jahangirnagar University
  • Atma Jaya Catholic University of Indonesia
  • Universiti Teknologi Petronas
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Zhong‐Tao JiangMurdoch University3
Mazhibayev AssylzhanM. Kh Dulati Taraz State University3
Khairulazhar JumbriUniversiti Teknologi Petronas3
Chun‐Chen YangMing Chi University of Technology3
Desi HeltinaRiau University2
EvelynAtma Jaya Catholic University of Indonesia2
ChairulAfiliasi tidak diketahui2
SunarnoRiau University2
Yoyok Dwi Setyo PambudiNational Research and Innovation Agency2
Elmira A. KambarovaM. Kh Dulati Taraz State University2
Khusnul AinUniversitas Airlangga2
Yayan SetiawanAfiliasi tidak diketahui1
Raihan Daffansyah SinagaAfiliasi tidak diketahui1
Muhammad Iwan FermiAfiliasi tidak diketahui1
YusnimarAfiliasi tidak diketahui1
Azka AmanAfiliasi tidak diketahui1
Suci RahmadahanaRiau University1
Sri Wahdini RahmiAfiliasi tidak diketahui1
KhairatAfiliasi tidak diketahui1
Hiroshi OhiUniversity of Tsukuba1
Yusnimar SahanRiau University1
Syamsu HermanRiau University1
Maria Peratenta SembiringRiau University1
Danil YoselinoRiau University1
NabelliaRiau University1
Agustina DumariaRiau University1
Khairati AmilaRiau University1
KomalasariRiau University1
Mawaddah MawaddahRiau University1
Alfatlian AlfatlianRiau University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://publikasi.mercubuana.ac.id/index.php/sinergi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Synergistic effects of low-cost graphene and coal fly ash on the strength–porosity performance of cellular lightweight concrete</dc:title>
	<dc:creator>Hendri, Yola Bertilsya</dc:creator>
	<dc:creator>Nazar, Ahlun</dc:creator>
	<dc:creator>Arianty, Geta</dc:creator>
	<dc:creator>Febryza, Dhina</dc:creator>
	<dc:creator>Miran, Hussein A.</dc:creator>
	<dc:creator>Jaf, Zainab N.</dc:creator>
	<dc:creator>Rahman, M. Mahbubur</dc:creator>
	<dc:creator>Taha, Hatem</dc:creator>
	<dc:creator>Jiang, Zhong Tao</dc:creator>
	<dc:creator>Amri, Amun</dc:creator>
	<dc:subject xml:lang="en-US">Cellular Lightweight Concrete (CLC)</dc:subject>
	<dc:subject xml:lang="en-US">Coal Fly Ash</dc:subject>
	<dc:subject xml:lang="en-US">Compressive Strength</dc:subject>
	<dc:subject xml:lang="en-US">Low-Cost Graphene</dc:subject>
	<dc:subject xml:lang="en-US">Porosity–Strength Trade-Off</dc:subject>
	<dc:description xml:lang="en-US">Cellular lightweight concrete (CLC) is attractive for envelope and infill applications due to its low density and low thermal and sound insulation. However, its high pore volume often reduces compressive strength and limits wider application. Graphene-based additives and fly ash have been widely studied in cementitious composites. However, their combined effect in low-density CLC remains insufficiently understood, particularly regarding the strength-porosity balance, cellular pore stability, and microstructural mechanism. This study investigated the synergistic effect of low-cost graphene produced by turbulence-assisted shear exfoliation (TASE) and coal fly ash on CLC with a target density of approximately 1.1 g·cm⁻³. TASE graphene was selected because its aqueous shear-exfoliation route offered lower processing complexity, better scalability, and stronger cost potential than many commercial or oxidized graphene derivatives, making it more suitable for large-volume cementitious applications. CLC mixtures containing 0–15 wt.% graphene and 0 or 5 wt.% fly ash were cast and cured for 14 and 28 days. Compressive strength, porosity, and microstructure (SEM/TEM) were evaluated. Among the investigated mixtures, the mixture containing 10 wt.% graphene and 5 wt.% fly ash produced the best strength–porosity performance, achieving the highest 28-day compressive strength of 1.86 ± 0.20 MPa and the lowest porosity of 23.70%. Compared with the graphene-free mixture at the same fly ash level, this composition increased strength by 64.60% and reduced porosity by 14.84%. SEM/TEM observations supported a dosage-dependent mechanism involving graphene-assisted nucleation, fly ash-assisted pozzolanic densification, pore-wall refinement, and reduced reinforcement efficiency at excessive graphene loading. These findings supported the practical design of graphene–fly ash modified CLC material systems. </dc:description>
	<dc:publisher xml:lang="en-US">Universitas Mercu Buana</dc:publisher>
	<dc:date>2026-10-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/36338</dc:identifier>
	<dc:identifier>10.22441/sinergi.2026.3.025</dc:identifier>
	<dc:source xml:lang="en-US">SINERGI; Vol. 30 No. 3 (2026); 1023-1036</dc:source>
	<dc:source>2460-1217</dc:source>
	<dc:source>1410-2331</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://publikasi.mercubuana.ac.id/index.php/sinergi/article/view/36338/12787</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 SINERGI</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>