Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of Cooling Media on Steel Hardness ST 37 On Conventional Lathe Process

Teknomekanik · Vol. 1 No. 1 (2018) · hlm. 6–11

DOI
10.24036/tm.v1i1.372
ISSN
2621-8720, 2621-9980
Terbit
2018-06-10
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

This study aims to determine the type of air cooling media, soluble oil, and air to the result on lathe ST 37 steel. The cooling medium is very important to maintain boring tool deformation and can add product quality. In the process lathe of friction between the workpiece and chisel cut that can produce overheating and influence on the result of the slice boring tool on the workpiece. The research that will be carried out is experimental research with variables that are controlled that is feeding, deep of a cut, and spindle rotation and examination of the hardness of the specimen on the object before done lathe. The sample in this study which is ST 37 steel with diameter 25 mm and length 60 mm as many as 9 specimens which will be done lathe with different type media kind inprocess working. To know influence the type of cooling medium against steel ST 37 is done brinnel hardeness test using test equipment hardness tester. Of the 9 specimens lathe will be determined 3 points to do hardeness tests. From the result of hardness test and analysis obtained from hardness test on steel ST 37 average data that is use of soluble refrigerant media that produce a very good cooling at the time of the lathe process. The results of research is obtained that the use of soluble refrigerant media is the best with an average hardness of 224.10 kg / mm². On the lathe process, the cooling media has oil content will be able to maintain the scores hardness and time-worn on boring tool. Thus to maintain the hardness values can be used soluble oil cooling media and to increase the hardness values of workpieces can be used air cooling media.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 130 tautan kepenulisan bersama · 27 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Iloilo Science and Technology University
  • Tun Hussein Onn University of Malaysia
  • Sriwijaya University
  • Institut Agama Islam Negeri Kendari
  • Universitas Syiah Kuala
  • Politeknik Negeri Malang
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Irzal IrzalUniversitas Negeri Padang9
Refdinal RefdinalUniversitas Negeri Padang4
Budi SyahriUniversitas Negeri Padang3
Purwantono PurwantonoUniversitas Negeri Padang3
Ambiyar AmbiyarUniversitas Negeri Padang2
K ArwizetUniversitas Negeri Padang2
Andre KurniawanUniversitas Negeri Padang2
Junil ArdiUniversitas Negeri Padang2
Syahrul SyahrulInstitut Agama Islam Negeri Kendari2
Wakhinuddin WakhinuddinUniversitas Negeri Padang2
Yolli FernandaUniversitas Negeri Padang2
Muhammad Agung PratomoUniversitas Negeri Padang2
Muhammad Fikhri AldioUniversitas Negeri Padang2
Tze Kiong TeeTun Hussein Onn University of Malaysia1
Waskito WaskitoUniversitas Negeri Padang1
Rizky Ema WulansariUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1
Pebrian PebrianUniversitas Negeri Padang1
Ganda AgustianUniversitas Negeri Padang1
Darmawi DarmawiSriwijaya University1
Sepdirama SetiawanUniversitas Negeri Padang1
Defindo EfendiUniversitas Negeri Padang1
Syahrul SyahrulUniversitas Negeri Padang1
Ikhsan ZulmaidasUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Nofri HelmiUniversitas Negeri Padang1
Muhammad AkhbarUniversitas Negeri Padang1
Muhibuddin MuhibuddinUniversitas Syiah Kuala1
Muhammad RizkiUniversitas Negeri Padang1
Rodger EliabIloilo Science and Technology University1
Herman ZulhafrilUniversitas Negeri Padang1
Kimberly June TespoerIloilo Science and Technology University1
Remon LapisaUniversitas Negeri Padang1
Nanang QosimPoliteknik Negeri Malang1
Zainal AbadiUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effect of Cooling Media on Steel Hardness ST 37 On Conventional Lathe Process</dc:title>
	<dc:creator xml:lang="en">Erizon, Nelvi</dc:creator>
	<dc:creator xml:lang="en">Ardiyansyah, M Iksan</dc:creator>
	<dc:creator xml:lang="en">Jasman, Jasman</dc:creator>
	<dc:creator xml:lang="en">A, Yufrizal</dc:creator>
	<dc:subject xml:lang="en">Cooling media Lathe  Steel ST 37 Hardness</dc:subject>
	<dc:description xml:lang="en">This study aims to determine the type of air cooling media, soluble oil, and air to the result on lathe ST 37 steel. The cooling medium is very important to maintain boring tool deformation and can add product quality. In the process lathe of friction between the workpiece and chisel cut that can produce overheating and influence on the result of the slice boring tool on the workpiece. The research that will be carried out is experimental research with variables that are controlled that is feeding, deep of a cut, and spindle rotation and examination of the hardness of the specimen on the object before done lathe. The sample in this study which is ST 37 steel with diameter 25 mm and length 60 mm as many as 9 specimens which will be done lathe with different type media kind inprocess working. To know influence the type of cooling medium against steel ST 37 is done brinnel hardeness test using test equipment hardness tester. Of the 9 specimens lathe will be determined 3 points to do hardeness tests. From the result of hardness test and analysis obtained from hardness test on steel ST 37 average data that is use of soluble refrigerant media that produce a very good cooling at the time of the lathe process. The results of research is obtained that the use of soluble refrigerant media is the best with an average hardness of 224.10 kg / mm². On the lathe process, the cooling media has oil content will be able to maintain the scores hardness and time-worn on boring tool. Thus to maintain the hardness values can be used soluble oil cooling media and to increase the hardness values of workpieces can be used air cooling media.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2018-06-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/3</dc:identifier>
	<dc:identifier>10.24036/tm.v1i1.372</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 1 No. 1 (2018): Regular Issue; 6-11</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/3/3</dc:relation>
</oai_dc:dc>