Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Design Build Dryer Machine Frying Results Nuts Eggs

Teknomekanik · Vol. 1 No. 1 (2018) · hlm. 18–23

DOI
10.24036/tm.v1i1.572
ISSN
2621-8720, 2621-9980
Terbit
2018-06-10
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

The purpose of this research is to design oil drying machine in nurts eggs to get the result of working drawing and to determine the peanut dryer component. The concept of planning oil drying machine in nurts eggss is by conducting a direct survey of the egg industry, the problems arise still high levels of oil in manually dried peanuts, then carry out the design concept. Based on the concept, then designed a design drawing. The result of this final task is in the form of design or design of oil oven dryers that utilize centrifugal force for drying oil, oil stainless steel rotary tube components, stainless steel container tube with stainless steel, axle components to support tubes of 22mm diameter and 520mm length, pulleys with a 3/6 ratio as a rotary reducer of an electric motor of 0.5 HP 1400 rpm to 500 rpm. Frame profile machine L 40 x 40 x 4 mm 42 st material and engine components made by Fernando Ferry from material st 37.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 138 tautan kepenulisan bersama · 39 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Universitas Lancang Kuning
  • Andalas University
  • Politeknik Negeri Padang
  • State University of Medan
  • Tun Hussein Onn University of Malaysia
  • King Abdulaziz University
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hendri NurdinUniversitas Negeri Padang5
Andre KurniawanUniversitas Negeri Padang4
Fazrol RoziPoliteknik Negeri Padang3
Nelvi ErizonUniversitas Negeri Padang3
Ar TrisyaldiUniversitas Negeri Padang3
Syahril SyahrilUniversitas Negeri Padang3
Dodi DeviantoAndalas University2
Ferra YanuarAndalas University2
Remon LapisaUniversitas Negeri Padang2
Refdinal RefdinalUniversitas Negeri Padang2
Batu Mahadi SiregarState University of Medan2
Tze Kiong TeeTun Hussein Onn University of Malaysia2
Rizky Ema WulansariUniversitas Negeri Padang2
Budi SyahriUniversitas Negeri Padang2
Yufrizal YufrizalUniversitas Negeri Padang2
Nizwardi JalinusUniversitas Negeri Padang1
Afriansyah AfriansyahUniversitas Lancang Kuning1
Rizki NovendraUniversitas Lancang Kuning1
Anna RasfiraUniversitas Lancang Kuning1
Hendri NurdinUniversitas Negeri Padang1
Fadhilah FadhilahUniversitas Negeri Padang1
Toto SugiartoUniversitas Negeri Padang1
Yolli FernandaUniversitas Negeri Padang1
Rudy AnartaUniversitas Negeri Padang1
Fathi Aulia DZUniversitas Negeri Padang1
Mulyanti MulyantiUniversitas Negeri Padang1
Fitrah QalbinaUniversitas Negeri Padang1
Arda YuniantaKing Abdulaziz University1
Irzal IrzalUniversitas Negeri Padang1
Ahmad Halim SidiqUniversitas Negeri Padang1
Mulyadi MulyadiMulawarman University1
Hasanuddin HasanuddinUniversitas Negeri Padang1
Syahrul SyahrulUniversitas Negeri Padang1
Hasanuddin HasanuddinState University of Makassar1
M SaddikinUniversitas Negeri Padang1
Junil ArdiUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design Build Dryer Machine Frying Results Nuts Eggs</dc:title>
	<dc:creator xml:lang="en">Purwantono, Purwantono</dc:creator>
	<dc:creator xml:lang="en">Waskito, Waskito</dc:creator>
	<dc:creator xml:lang="en">Rinaldo, Putu Satria</dc:creator>
	<dc:creator xml:lang="en">primawati, primawati</dc:creator>
	<dc:subject xml:lang="en">Shop Drawing Concept Design Dryer Machine Cooking Oil Nuts Eggs</dc:subject>
	<dc:description xml:lang="en">The purpose of this research is to design oil drying machine in nurts eggs to get the result of working drawing and to determine the peanut dryer component. The concept of planning oil drying machine in nurts eggss is by conducting a direct survey of the egg industry, the problems arise still high levels of oil in manually dried peanuts, then carry out the design concept. Based on the concept, then designed a design drawing. The result of this final task is in the form of design or design of oil oven dryers that utilize centrifugal force for drying oil, oil stainless steel rotary tube components, stainless steel container tube with stainless steel , axle components to support tubes of 22mm diameter and 520mm length, pulleys with a 3/6 ratio as a rotary reducer of an electric motor of 0.5 HP 1400 rpm to 500 rpm. Frame profile machine L 40 x 40 x 4 mm 42 st material and engine components made by Fernando Ferry from material st 37.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2018-06-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/5</dc:identifier>
	<dc:identifier>10.24036/tm.v1i1.572</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 1 No. 1 (2018): Regular Issue; 18-23</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/5/1</dc:relation>
</oai_dc:dc>