Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Comparison of Accuracy in Cutting Dental Profiles Between Differential Methods Approach Upward with a Lower Approach to Making Straight Gear Wheels

Teknomekanik · Vol. 1 No. 2 (2018) · hlm. 32–37

DOI
10.24036/tm.v2i2.1672
ISSN
2621-8720, 2621-9980
Terbit
2018-12-16
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

In the world of industrial gear use, it cannot be denied, every machine in the industrial world uses a component, namely gears to move rotating power. For this reason, in making gears the precision of the gear profile must be considered. The purpose of this study is to compare the accuracy of cutting the dental profile between the approach differential method and the approach to the bottom. This research is an experimental research. Based on the results of data analysis on the comparison of the precision of cutting dental profiles between the approach differential methods and the approach to the bottom, the upward approach is more appropriate in terms of thickness and number of teeth. The number of samples used in the study of 12 gears consisting of 6 gears was carried out with the approach differential approach method, and 6 gears were carried out by the differential approach approach method. Each sample is measured in thickness and the number of teeth in a straight gear. After measurement, the data is processed using the t-test formula to see the significant difference in the accuracy of the dental profile. Based on the results of the t-test analysis that has been carried out there are differences in the gears produced. The approach to differential approach to getting better gear results.

Kata kunci

Jaringan kolaborasi para penulis

34 penulis · 128 tautan kepenulisan bersama · 41 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • National Cheng Kung University
  • Andalas University
  • Sriwijaya University
  • Vinh Long University of Technology Education
  • Quaid-e-Awam University of Engineering, Science and Technology
  • University of Science and Technology of Southern Philippines
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Jasman JasmanUniversitas Negeri Padang6
Nelvi ErizonUniversitas Negeri Padang5
Refdinal RefdinalUniversitas Negeri Padang3
Ambiyar AmbiyarUniversitas Negeri Padang2
K ArwizetUniversitas Negeri Padang2
Budi SyahriUniversitas Negeri Padang2
Dieter RahmadiawanNational Cheng Kung University2
Muhammad Shadiq FahreziUniversitas Negeri Padang2
Firza FernandaUniversitas Negeri Padang2
Egi FadillahUniversitas Negeri Padang2
Ma Leona Maye B. PepitoUniversity of Science and Technology of Southern Philippines2
M Iksan ArdiyansyahUniversitas Negeri Padang1
Pebrian PebrianUniversitas Negeri Padang1
Darmawi DarmawiSriwijaya University1
Sepdirama SetiawanUniversitas Negeri Padang1
Purwantono PurwantonoUniversitas Negeri Padang1
Ahmad Halim SidiqUniversitas Negeri Padang1
Defindo EfendiUniversitas Negeri Padang1
Syahrul SyahrulUniversitas Negeri Padang1
Ikhsan ZulmaidasUniversitas Negeri Padang1
Junil ArdiUniversitas Negeri Padang1
Muhammad Fikhri AldioUniversitas Negeri Padang1
Aprizal SaputraUniversitas Negeri Padang1
Chau Trung TinVinh Long University of Technology Education1
Febrian IlhamsyahAndalas University1
Hairul AbralAndalas University1
Imtiaz Ali LaghariQuaid-e-Awam University of Engineering, Science and Technology1
Wei-Ting ZhuangNational Cheng Kung University1
Yolli FernandaUniversitas Negeri Padang1
Eko IndrawanUniversitas Negeri Padang1
Shih-Chen ShiNational Cheng Kung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparison of Accuracy in Cutting Dental Profiles Between Differential Methods Approach Upward with a Lower Approach to Making Straight Gear Wheels</dc:title>
	<dc:creator xml:lang="en">Agustian, Ganda</dc:creator>
	<dc:creator xml:lang="en">A, Yufrizal</dc:creator>
	<dc:creator xml:lang="en">Irzal, Irzal</dc:creator>
	<dc:subject xml:lang="en">Gears Profile</dc:subject>
	<dc:subject xml:lang="en">Differential Method</dc:subject>
	<dc:subject xml:lang="en">Comparison of Accuracy</dc:subject>
	<dc:subject xml:lang="en">Odd</dc:subject>
	<dc:subject xml:lang="en">Gear’s  Thick</dc:subject>
	<dc:description xml:lang="en">In the world of industrial gear use, it cannot be denied, every machine in the industrial world uses a component, namely gears to move rotating power. For this reason, in making gears the precision of the gear profile must be considered. The purpose of this study is to compare the accuracy of cutting the dental profile between the approach differential method and the approach to the bottom. This research is an experimental research. Based on the results of data analysis on the comparison of the precision of cutting dental profiles between the approach differential methods and the approach to the bottom, the upward approach is more appropriate in terms of thickness and number of teeth. The number of samples used in the study of 12 gears consisting of 6 gears was carried out with the approach differential approach method, and 6 gears were carried out by the differential approach approach method. Each sample is measured in thickness and the number of teeth in a straight gear. After measurement, the data is processed using the t-test formula to see the significant difference in the accuracy of the dental profile. Based on the results of the t-test analysis that has been carried out there are differences in the gears produced. The approach to differential approach to getting better gear results.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2018-12-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/16</dc:identifier>
	<dc:identifier>10.24036/tm.v2i2.1672</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 1 No. 2 (2018): Regular Issue; 32-37</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/16/19</dc:relation>
</oai_dc:dc>