Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Numerical Analysis of Fluid Flow on Cross Flow and Kaplan Turbine Prototype

Teknomekanik · Vol. 1 No. 2 (2018) · hlm. 43–47

DOI
10.24036/tm.v2i1.1972
ISSN
2621-8720, 2621-9980
Terbit
2018-12-16
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

Based on previous research conducted by Purwantono about the utilization of exhaust flow from a conventional cross-flow turbine prototype that was used as an inlet of tubin Kaplan [1]. This research was carried out to see how the exhaust flow velocity of each tubin before and after was combined into one combination turbine. This numerical based study uses the Ansys 18.0 application by inputting a 3D design from a conventional turbine prototype which was used as the material for this study. The results obtained in this study show the average of outlet velocity in the Kaplan turbine that uses a velocity outlet from a cross flow turbine of 0.3 m / s greater when it is combined, which is 8.33 m / s and after being combined to 0.38 m / s. The results of this study are expected to contribute to the development of conventional turbines later

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 124 tautan kepenulisan bersama · 22 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • State University of Medan
  • Tun Hussein Onn University of Malaysia
  • King Mongkut's Institute of Technology Ladkrabang
  • Universitas Syiah Kuala
  • Vinh Long University of Technology Education
  • Universiti Sains Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Jasman JasmanUniversitas Negeri Padang7
Nelvi ErizonUniversitas Negeri Padang6
Waskito WaskitoUniversitas Negeri Padang4
A YufrizalUniversitas Negeri Padang3
Junil ArdiUniversitas Negeri Padang3
Primawati PrimawatiUniversitas Negeri Padang2
Andre KurniawanUniversitas Negeri Padang2
Budi SyahriUniversitas Negeri Padang2
Hendri NurdinUniversitas Negeri Padang2
Tze Kiong TeeTun Hussein Onn University of Malaysia1
Rizky Ema WulansariUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1
Ramli RamliUniversitas Negeri Padang1
Rio AndeskoUniversitas Negeri Padang1
Putu Satria RinaldoUniversitas Negeri Padang1
Pebrian PebrianUniversitas Negeri Padang1
Ganda AgustianUniversitas Negeri Padang1
Ar TrisyaldiUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Alan NovendraUniversitas Negeri Padang1
Sai Kham LeKing Mongkut's Institute of Technology Ladkrabang1
Nofri HelmiUniversitas Negeri Padang1
Muhammad AkhbarUniversitas Negeri Padang1
Muhibuddin MuhibuddinUniversitas Syiah Kuala1
Ahmad SabirinUniversitas Negeri Padang1
Muhammad Fikhri AldioUniversitas Negeri Padang1
Aprizal SaputraUniversitas Negeri Padang1
Chau Trung TinVinh Long University of Technology Education1
Anna Niska FauzaUniversitas Negeri Padang1
Ambiyar AmbiyarUniversitas Negeri Padang1
Fitrah QalbinaUniversitas Negeri Padang1
Janter Pangaduan SimanjuntakState University of Medan1
Binsar Maruli Tua PakpahanState University of Medan1
Khaled Ali Al-AttabUniversiti Sains Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Numerical Analysis of Fluid Flow on Cross Flow and Kaplan Turbine Prototype</dc:title>
	<dc:creator xml:lang="en">Purwantono, Purwantono</dc:creator>
	<dc:creator xml:lang="en">Sidiq, Ahmad Halim</dc:creator>
	<dc:creator xml:lang="en">Irzal, Irzal</dc:creator>
	<dc:creator xml:lang="en">Refdinal, Refdinal</dc:creator>
	<dc:subject xml:lang="en">Cross Flow Turbine</dc:subject>
	<dc:subject xml:lang="en">Kaplan Turbin</dc:subject>
	<dc:subject xml:lang="en">Fluid Flow</dc:subject>
	<dc:subject xml:lang="en">Numerical Analysis</dc:subject>
	<dc:subject xml:lang="en">Turbine</dc:subject>
	<dc:description xml:lang="en">Based on previous research conducted by Purwantono about the utilization of exhaust flow from a conventional cross-flow turbine prototype that was used as an inlet of tubin Kaplan [1]. This research was carried out to see how the exhaust flow velocity of each tubin before and after was combined into one combination turbine. This numerical based study uses the Ansys 18.0 application by inputting a 3D design from a conventional turbine prototype which was used as the material for this study. The results obtained in this study show the average of outlet velocity in the Kaplan turbine that uses a velocity outlet from a cross flow turbine of 0.3 m / s greater when it is combined, which is 8.33 m / s and after being combined to 0.38 m / s. The results of this study are expected to contribute to the development of conventional turbines later</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2018-12-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/19</dc:identifier>
	<dc:identifier>10.24036/tm.v2i1.1972</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 1 No. 2 (2018): Regular Issue; 43-47</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/19/9</dc:relation>
</oai_dc:dc>