Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparative Analysis Spindle Speed Constant with Cutting Speed Constant against Surface Roughness Gradual Turning Steel ST 37 on the NC PU 2A Machine

Teknomekanik · Vol. 1 No. 2 (2018) · hlm. 48–52

DOI
10.24036/tm.v2i1.2272
ISSN
2621-8720, 2621-9980
Terbit
2018-12-16
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Parameters of spindle speed and cutting speed affect surface roughness in the turning process. The purpose of this research is to know the comparison of the level surface roughness resulting from the parameters of spindle speed constant and cutting speed constant. The method of this research is experimental research, by performing gradual turning process on the steel ST 37 specimens in the NC PU 2A EMCOTURN 120 machine. The number of specimens is 6 specimens, each specimen is gradual turned as much 3 levels, each level is tested as much 3 points of surface quality using "Surface Tester Mitutoyo SJ-201P". The results of the research were analyzed using descriptive statistics by taking the average value of the two parameters. Based on the analysis of the data from the results of the research conducted, the surface roughness produced using a cutting speed constant (G96) is better than the spindle speed constant (G97). Cutting speed constant is more stable when cutting in gradual turning.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 89 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Andalas University
  • Sriwijaya University
  • National Cheng Kung University
  • Quaid-e-Awam University of Engineering, Science and Technology
  • University of Science and Technology of Southern Philippines
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ambiyar AmbiyarUniversitas Negeri Padang3
Nelvi ErizonUniversitas Negeri Padang2
Jasman JasmanUniversitas Negeri Padang2
Irzal IrzalUniversitas Negeri Padang2
Darmawi DarmawiSriwijaya University2
Budi SyahriUniversitas Negeri Padang2
Sepdirama SetiawanUniversitas Negeri Padang2
M Iksan ArdiyansyahUniversitas Negeri Padang1
Ganda AgustianUniversitas Negeri Padang1
Syahrul SyahrulUniversitas Negeri Padang1
Ikhsan ZulmaidasUniversitas Negeri Padang1
Yolli FernandaUniversitas Negeri Padang1
Andika PutraUniversitas Negeri Padang1
Delima Yanti SariUniversitas Negeri Padang1
Dieter RahmadiawanNational Cheng Kung University1
Febrian IlhamsyahAndalas University1
Hairul AbralAndalas University1
Imtiaz Ali LaghariQuaid-e-Awam University of Engineering, Science and Technology1
Refdinal RefdinalUniversitas Negeri Padang1
Muhammad Shadiq FahreziUniversitas Negeri Padang1
Firza FernandaUniversitas Negeri Padang1
Egi FadillahUniversitas Negeri Padang1
Ma Leona Maye B. PepitoUniversity of Science and Technology of Southern Philippines1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparative Analysis Spindle Speed Constant with Cutting Speed Constant against Surface Roughness Gradual Turning Steel ST 37 on the NC PU 2A Machine</dc:title>
	<dc:creator xml:lang="en">Efendi, Defindo</dc:creator>
	<dc:creator xml:lang="en">A, Yufrizal</dc:creator>
	<dc:creator xml:lang="en">K, Arwizet</dc:creator>
	<dc:subject xml:lang="en">Surface Roughness</dc:subject>
	<dc:subject xml:lang="en">Spindle Speed Constant</dc:subject>
	<dc:subject xml:lang="en">Cutting Speed Constant</dc:subject>
	<dc:subject xml:lang="en">CNC</dc:subject>
	<dc:subject xml:lang="en">Steel ST 37</dc:subject>
	<dc:description xml:lang="en">Parameters of spindle speed and cutting speed affect surface roughness in the turning process. The purpose of this research is to know the comparison of the level surface roughness resulting from the parameters of spindle speed constant and cutting speed constant. The method of this research is experimental research, by performing gradual turning process on the steel ST 37 specimens in the NC PU 2A EMCOTURN 120 machine. The number of specimens is 6 specimens, each specimen is gradual turned as much 3 levels, each level is tested as much 3 points of surface quality using "Surface Tester Mitutoyo SJ-201P". The results of the research were analyzed using descriptive statistics by taking the average value of the two parameters. Based on the analysis of the data from the results of the research conducted, the surface roughness produced using a cutting speed constant (G96) is better than the spindle speed constant (G97). Cutting speed constant is more stable when cutting in gradual turning.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2018-12-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/22</dc:identifier>
	<dc:identifier>10.24036/tm.v2i1.2272</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 1 No. 2 (2018): Regular Issue; 48-52</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/22/8</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2018 Defindo Efendi, Yufrizal A, Arwizet K</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>