Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Manufacture and Testing of Belt Grinding Development

Teknomekanik · Vol. 2 No. 1 (2019) · hlm. 20–23

DOI
10.24036/tm.v2i1.2972
ISSN
2621-8720, 2621-9980
Terbit
2019-06-02
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

The lack of utilization of belt grinding, especially in the world of education due to lack of public understanding of the workmanship of belt grinding. This study discusses the process of developing belt grinders from the manufacturing stage to testing. The purpose of this study is to develop belt grinders of existing forms, to maximize their function. The belt burrs resulting from this development have three functions, namely the vertical, angle and horizontal cutting function. This belt burrs are also equipped with speed control. With the development of this belt grinder, it is hoped that it will add to the public's insight into the belt grinding function and better assist the work of grinding, especially grinding finishing.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 116 tautan kepenulisan bersama · 24 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Andalas University
  • Western Sydney University
  • Sriwijaya University
  • Mulawarman University
  • National Cheng Kung University
  • Quaid-e-Awam University of Engineering, Science and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
K ArwizetUniversitas Negeri Padang3
Nelvi ErizonUniversitas Negeri Padang2
Jasman JasmanUniversitas Negeri Padang2
Irzal IrzalUniversitas Negeri Padang2
Darmawi DarmawiSriwijaya University2
Budi SyahriUniversitas Negeri Padang2
Sepdirama SetiawanUniversitas Negeri Padang2
Refdinal RefdinalUniversitas Negeri Padang2
Nurhasan SyahUniversitas Negeri Padang1
RH SaktiAfiliasi tidak diketahui1
Rizky Ema WulansariUniversitas Negeri Padang1
Muhammad GiatmanUniversitas Negeri Padang1
Wakhinuddin WakhinuddinUniversitas Negeri Padang1
Sukardi SukardiUniversitas Negeri Padang1
Syaiful IslamiUniversitas Negeri Padang1
Anggi Agni ZausWestern Sydney University1
Anggun Agni ZausUniversitas Negeri Padang1
Mahesi Agni ZausUniversitas Negeri Padang1
Rido PutraUniversitas Negeri Padang1
Dedi SetiawanUniversitas Negeri Padang1
Muslim MuslimUniversitas Negeri Padang1
M Iksan ArdiyansyahUniversitas Negeri Padang1
Ganda AgustianUniversitas Negeri Padang1
Mulyadi MulyadiMulawarman University1
Waskito WaskitoUniversitas Negeri Padang1
Hasanuddin HasanuddinUniversitas Negeri Padang1
Defindo EfendiUniversitas Negeri Padang1
Yogi FernandoUniversitas Negeri Padang1
Rodesri MulyadiUniversitas Negeri Padang1
Dieter RahmadiawanNational Cheng Kung University1
Febrian IlhamsyahAndalas University1
Hairul AbralAndalas University1
Imtiaz Ali LaghariQuaid-e-Awam University of Engineering, Science and Technology1
Anna Niska FauzaUniversitas Negeri Padang1
Fitrah QalbinaUniversitas Negeri Padang1
Hendri NurdinUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Manufacture and Testing of Belt Grinding Development</dc:title>
	<dc:creator xml:lang="en">Zulmaidas, Ikhsan</dc:creator>
	<dc:creator xml:lang="en">Syahrul, Syahrul</dc:creator>
	<dc:creator xml:lang="en">Ambiyar, Ambiyar</dc:creator>
	<dc:creator xml:lang="en">A, Yufrizal</dc:creator>
	<dc:subject xml:lang="en">Belt burrs</dc:subject>
	<dc:subject xml:lang="en">Engine Speed</dc:subject>
	<dc:subject xml:lang="en">Time</dc:subject>
	<dc:subject xml:lang="en">Wood</dc:subject>
	<dc:subject xml:lang="en">Stainless steel</dc:subject>
	<dc:description xml:lang="en">The lack of utilization of belt grinding, especially in the world of education due to lack of public understanding of the workmanship of belt grinding. This study discusses the process of developing belt grinders from the manufacturing stage to testing. The purpose of this study is to develop belt grinders of existing forms, to maximize their function. The belt burrs resulting from this development have three functions, namely the vertical, angle and horizontal cutting function. This belt burrs are also equipped with speed control. With the development of this belt grinder, it is hoped that it will add to the public's insight into the belt grinding function and better assist the work of grinding, especially grinding finishing.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2019-06-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/29</dc:identifier>
	<dc:identifier>10.24036/tm.v2i1.2972</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 2 No. 1 (2019): Regular Issue; 20-23</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/29/12</dc:relation>
</oai_dc:dc>