Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Welding Competence Training at Dropout Youth

Teknomekanik · Vol. 2 No. 1 (2019) · hlm. 29–38

DOI
10.24036/tm.v2i2.4072
ISSN
2621-8720, 2621-9980
Terbit
2019-06-02
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

The problem with partners is drop out youth who do not have competence. The condition of the community dropping out of school and working as unskilled labourers has an impact on the low level of public welfare. The distance between the Dharmasraya district and the provincial capital has an impact on the contrast of the quality of education carried out which causes the community to not understand the importance of education. So that some of the human resources in Dharmasraya have become manual labourers in plantations and factories. The purpose of implementing this service activity is to provide a solution to the problems faced by the community, especially for school dropouts. Most of the dropout youths who are junior high school (SMP) level do not have special competencies that make them have added value. The work carried out by this young man is only limited to gardening and does not guarantee economic prosperity. Through this service activity, TIM strives to provide competency in the welding field that can be used to open a business that is much needed by the community. The training activities were designed for 3 days which will be held from October 12 to October 14 2018. The speakers in this activity were Drs. Purwantono, M.Pd, who has a BNSP level I welding certificate and the second speaker is Junil Adri, M.Pd.T who has a BNSP level III welding certificate. On the first day, the speaker will convey the basic concepts in the welding process and demonstrate how to make weld grooves and connect the plate in the welding process. On the second day, the speakers began to invite participants to design products that could be made through welding activities in accordance with the needs of the community. In this activity, TIM directed to make a trellis fence. TEAM began to guide participants in the process of making a trellis. On the third day, the TEAM provided direction on how to weld entrepreneurial opportunities in the field. The chairperson of the service with TIM asked the kenagarian to be able to accommodate the birth of new entrepreneurs for youth who could make independent and productive people.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 140 tautan kepenulisan bersama · 31 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • State University of Medan
  • Tun Hussein Onn University of Malaysia
  • King Mongkut's Institute of Technology Ladkrabang
  • Universitas Syiah Kuala
  • Universiti Sains Malaysia
  • University of Science and Technology of Southern Philippines
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Waskito WaskitoUniversitas Negeri Padang4
Nelvi ErizonUniversitas Negeri Padang4
Irzal IrzalUniversitas Negeri Padang4
Jasman JasmanUniversitas Negeri Padang4
Primawati PrimawatiUniversitas Negeri Padang2
Andre KurniawanUniversitas Negeri Padang2
Ahmad Halim SidiqUniversitas Negeri Padang2
Hendri NurdinUniversitas Negeri Padang2
Tze Kiong TeeTun Hussein Onn University of Malaysia1
Rizky Ema WulansariUniversitas Negeri Padang1
Budi SyahriUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1
Ramli RamliUniversitas Negeri Padang1
Rio AndeskoUniversitas Negeri Padang1
Putu Satria RinaldoUniversitas Negeri Padang1
Ar TrisyaldiUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Alan NovendraUniversitas Negeri Padang1
Sai Kham LeKing Mongkut's Institute of Technology Ladkrabang1
Nofri HelmiUniversitas Negeri Padang1
Muhammad AkhbarUniversitas Negeri Padang1
Muhibuddin MuhibuddinUniversitas Syiah Kuala1
Ahmad SabirinUniversitas Negeri Padang1
Anna Niska FauzaUniversitas Negeri Padang1
Ambiyar AmbiyarUniversitas Negeri Padang1
Fitrah QalbinaUniversitas Negeri Padang1
Janter Pangaduan SimanjuntakState University of Medan1
Binsar Maruli Tua PakpahanState University of Medan1
Khaled Ali Al-AttabUniversiti Sains Malaysia1
A YufrizalUniversitas Negeri Padang1
Muhammad Shadiq FahreziUniversitas Negeri Padang1
Firza FernandaUniversitas Negeri Padang1
Egi FadillahUniversitas Negeri Padang1
Ma Leona Maye B. PepitoUniversity of Science and Technology of Southern Philippines1
Dani HarmantoDe Montfort University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Welding Competence Training at Dropout Youth</dc:title>
	<dc:creator xml:lang="en">Refdinal, Refdinal</dc:creator>
	<dc:creator xml:lang="en">Ardi, Junil</dc:creator>
	<dc:creator xml:lang="en">Purwantono, Purwantono</dc:creator>
	<dc:subject xml:lang="en">Community service Training Welding Competence Youth Drop Out of School Dharmasraya</dc:subject>
	<dc:description xml:lang="en">The problem with partners is drop out youth who do not have competence. The condition of the community dropping out of school and working as unskilled labourers has an impact on the low level of public welfare. The distance between the Dharmasraya district and the provincial capital has an impact on the contrast of the quality of education carried out which causes the community to not understand the importance of education. So that some of the human resources in Dharmasraya have become manual labourers in plantations and factories. The purpose of implementing this service activity is to provide a solution to the problems faced by the community, especially for school dropouts. Most of the dropout youths who are junior high school (SMP) level do not have special competencies that make them have added value. The work carried out by this young man is only limited to gardening and does not guarantee economic prosperity. Through this service activity, TIM strives to provide competency in the welding field that can be used to open a business that is much needed by the community. The training activities were designed for 3 days which will be held from October 12 to October 14 2018. The speakers in this activity were Drs. Purwantono, M.Pd, who has a BNSP level I welding certificate and the second speaker is Junil Adri, M.Pd.T who has a BNSP level III welding certificate. On the first day, the speaker will convey the basic concepts in the welding process and demonstrate how to make weld grooves and connect the plate in the welding process. On the second day, the speakers began to invite participants to design products that could be made through welding activities in accordance with the needs of the community. In this activity, TIM directed to make a trellis fence. TEAM began to guide participants in the process of making a trellis. On the third day, the TEAM provided direction on how to weld entrepreneurial opportunities in the field. The chairperson of the service with TIM asked the kenagarian to be able to accommodate the birth of new entrepreneurs for youth who could make independent and productive people.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2019-06-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/40</dc:identifier>
	<dc:identifier>10.24036/tm.v2i2.4072</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 2 No. 1 (2019): Regular Issue; 29-38</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/40/21</dc:relation>
</oai_dc:dc>