Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Cast Iron Preheating on the Microstructure of Welding Results by Using Cin-2 Electrodes

Teknomekanik · Vol. 3 No. 2 (2020) · hlm. 50–55

DOI
10.24036/teknomekanik.v3i2.6172
ISSN
2621-8720, 2621-9980
Terbit
2020-12-10
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

Cast iron is commonly found in engineering tools such as machine frames, vise, lathes, planers, pressing tools, V-belt pulleys and others. Cast iron is a metal which is relatively difficult to weld because it contains more than 0.3% carbon. As a matter of fact, a lot of welding workers still experience failure in welding the cast iron, so they require the proper procedures to perform welding on the cast iron like the heat treatment before the welding. This study was aimed at obtaining the effect of preheating variations on the weld joints in which the process of welding the material used the type of open V seam connection. The specimen used was a cast iron with a thickness of 10 mm and the electrode used was the JIS Z 3252 DFCNiFe electrode. The method applied in this research was the microstructure observation testing toward the welding result by using Shielded Metal Arc Welding (SMAW). Based on the results of the study, it can be concluded that by applying the preheating variation treatment on the cast iron welding, there was a change in the microstructure and it was dominated by pearlite-ferrite in the weld metal area. As a result, the rough graphite that looks like roots became smooth after experiencing the preheating treatment because the ferrite was evenly distributed in the heat affected area. To conclude, the most superior specimen for the cast iron preheating among the four specimens was the one with 425oC temperature.

Kata kunci

Jaringan kolaborasi para penulis

30 penulis · 98 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • State University of Medan
  • Tun Hussein Onn University of Malaysia
  • Universitas Syiah Kuala
  • Universiti Sains Malaysia
  • De Montfort University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Waskito WaskitoUniversitas Negeri Padang4
Nelvi ErizonUniversitas Negeri Padang2
Primawati PrimawatiUniversitas Negeri Padang2
Refdinal RefdinalUniversitas Negeri Padang2
Andre KurniawanUniversitas Negeri Padang2
Tze Kiong TeeTun Hussein Onn University of Malaysia1
Rizky Ema WulansariUniversitas Negeri Padang1
Budi SyahriUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1
Putu Satria RinaldoUniversitas Negeri Padang1
Irzal IrzalUniversitas Negeri Padang1
Ahmad Halim SidiqUniversitas Negeri Padang1
Ar TrisyaldiUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Junil ArdiUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Jasman JasmanUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Nofri HelmiUniversitas Negeri Padang1
Muhammad AkhbarUniversitas Negeri Padang1
Muhibuddin MuhibuddinUniversitas Syiah Kuala1
Janter Pangaduan SimanjuntakState University of Medan1
Binsar Maruli Tua PakpahanState University of Medan1
Khaled Ali Al-AttabUniversiti Sains Malaysia1
Yoszi Mingsih AnapertaAfiliasi tidak diketahui1
Dori YuvendaUniversitas Negeri Padang1
Dani HarmantoDe Montfort University1
Hendri NurdinUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect of Cast Iron Preheating on the Microstructure of Welding Results by Using Cin-2 Electrodes</dc:title>
	<dc:creator xml:lang="en">Sabirin, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Purwantono, Purwantono</dc:creator>
	<dc:subject xml:lang="en">Effect of Difference</dc:subject>
	<dc:subject xml:lang="en">Preheating Variation</dc:subject>
	<dc:subject xml:lang="en">Microstructure</dc:subject>
	<dc:subject xml:lang="en">Cast iron</dc:subject>
	<dc:description xml:lang="en">Cast iron is commonly found in engineering tools such as machine frames, vise, lathes, planers, pressing tools, V-belt pulleys and others. Cast iron is a metal which is relatively difficult to weld because it contains more than 0.3% carbon. As a matter of fact, a lot of welding workers still experience failure in welding the cast iron, so they require the proper procedures to perform welding on the cast iron like the heat treatment before the welding. This study was aimed at obtaining the effect of preheating variations on the weld joints in which the process of welding the material used the type of open V seam connection. The specimen used was a cast iron with a thickness of 10 mm and the electrode used was the JIS Z 3252 DFCNiFe electrode. The method applied in this research was the microstructure observation testing toward the welding result by using Shielded Metal Arc Welding (SMAW). Based on the results of the study, it can be concluded that by applying the preheating variation treatment on the cast iron welding, there was a change in the microstructure and it was dominated by pearlite-ferrite in the weld metal area. As a result, the rough graphite that looks like roots became smooth after experiencing the preheating treatment because the ferrite was evenly distributed in the heat affected area. To conclude, the most superior specimen for the cast iron preheating among the four specimens was the one with 425oC temperature.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2020-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/61</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v3i2.6172</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 3 No. 2 (2020): Regular Issue; 50-55</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/61/32</dc:relation>
</oai_dc:dc>