Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Cooling Media on Tensile Strength of Medium Carbon Steel in Post Welding Process Using Electric Welding (SMAW) with E7018 Electrodes

Teknomekanik · Vol. 3 No. 2 (2020) · hlm. 62–69

DOI
10.24036/teknomekanik.v3i2.6472
ISSN
2621-8720, 2621-9980
Terbit
2020-12-10
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

The use of cooling media in post welding process will affect the tensile strength of a material. This study aims to determine how much the influence of using cooling media in post welding and which cooling media is appropriate to use. The process is done by comparing the tensile strength of each cooling media, namely the cooling media of water, air, and coolant. The use of cooling media is carried out after the welding process, until the material that is ready to be welded reaches room temperature. Based on the experiments that have been conducted, the use of post-welding cooling media affects the tensile strength of medium carbon steel with the highest effect on the water cooling media, then the coolant media, and the lowest is the air cooling media. Therefore, the choice of the use of cooling media significantly affects the tensile strength of medium carbon steel in the post-welding process.

Kata kunci

Jaringan kolaborasi para penulis

33 penulis · 118 tautan kepenulisan bersama · 28 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Iloilo Science and Technology University
  • Institut Agama Islam Negeri Kendari
  • Politeknik Negeri Malang
  • Vinh Long University of Technology Education
  • University of Science and Technology of Southern Philippines
  • Tun Hussein Onn University of Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nelvi ErizonUniversitas Negeri Padang6
Irzal IrzalUniversitas Negeri Padang4
A YufrizalUniversitas Negeri Padang2
Andre KurniawanUniversitas Negeri Padang2
Refdinal RefdinalUniversitas Negeri Padang2
M Iksan ArdiyansyahUniversitas Negeri Padang1
Pebrian PebrianUniversitas Negeri Padang1
Junil ArdiUniversitas Negeri Padang1
Syahrul SyahrulInstitut Agama Islam Negeri Kendari1
Wakhinuddin WakhinuddinUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Purwantono PurwantonoUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Yolli FernandaUniversitas Negeri Padang1
Muhammad Agung PratomoUniversitas Negeri Padang1
Remon LapisaUniversitas Negeri Padang1
Nanang QosimPoliteknik Negeri Malang1
Zainal AbadiUniversitas Negeri Padang1
Muhammad Fikhri AldioUniversitas Negeri Padang1
Aprizal SaputraUniversitas Negeri Padang1
Chau Trung TinVinh Long University of Technology Education1
Muhammad Shadiq FahreziUniversitas Negeri Padang1
Firza FernandaUniversitas Negeri Padang1
Egi FadillahUniversitas Negeri Padang1
Ma Leona Maye B. PepitoUniversity of Science and Technology of Southern Philippines1
Bulkia RahimUniversitas Negeri Padang1
Junil AdriUniversitas Negeri Padang1
Durain ParmanoanUniversitas Negeri Padang1
Meri MarliannaUniversitas Negeri Padang1
Lai Chee SernTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect of Cooling Media on Tensile Strength of Medium Carbon Steel in Post Welding Process Using Electric Welding (SMAW) with E7018 Electrodes</dc:title>
	<dc:creator xml:lang="en">Zulhafril, Herman</dc:creator>
	<dc:creator xml:lang="en">Jasman, Jasman</dc:creator>
	<dc:creator xml:lang="en">Tespoer, Kimberly June</dc:creator>
	<dc:subject xml:lang="en">Cooling Medium</dc:subject>
	<dc:subject xml:lang="en">Tensile Strenght</dc:subject>
	<dc:subject xml:lang="en">SMAW</dc:subject>
	<dc:subject xml:lang="en">Medium Carbon Steel</dc:subject>
	<dc:subject xml:lang="en">Electrode E7018</dc:subject>
	<dc:description xml:lang="en">The use of cooling media in post welding process will affect the tensile strength of a material. This study aims to determine how much the influence of using cooling media in post welding and which cooling media is appropriate to use. The process is done by comparing the tensile strength of each cooling media, namely the cooling media of water, air, and coolant. The use of cooling media is carried out after the welding process, until the material that is ready to be welded reaches room temperature. Based on the experiments that have been conducted, the use of post-welding cooling media affects the tensile strength of medium carbon steel with the highest effect on the water cooling media, then the coolant media, and the lowest is the air cooling media. Therefore, the choice of the use of cooling media significantly affects the tensile strength of medium carbon steel in the post-welding process.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2020-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/64</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v3i2.6472</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 3 No. 2 (2020): Regular Issue; 62-69</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/64/34</dc:relation>
</oai_dc:dc>