Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect of Preheating and Non-Preheating in Cast Iron Welding Toward Mechanical Properties

Teknomekanik · Vol. 3 No. 2 (2020) · hlm. 70–74

DOI
10.24036/teknomekanik.v3i2.7272
ISSN
2621-8720, 2621-9980
Terbit
2020-12-10
Penerbit
Universitas Negeri Padang
Bahasa
eng

Abstrak

Cast iron material is a material that has brittle properties and is less able to withstand stress due to the welding cycle caused by flake graphite in cast iron. Because of these problems, in connecting cast iron materials using the SMAW welding method, it is necessary to have heat treatment (preheating) to avoid the welding problems on the properties of cast iron. The purpose of this study is to determine the effect of heating and non-heating on the cast iron before the welding process. Therefore, this research will play a crucial contribution as a reference for cast iron welding researchers and cast iron welding process. The method of the research was experimental research, where the measurement results were obtained directly from the specimens. The welding was using an open V seam. The specimen used was cast iron with a thickness of 8 mm. One cast iron was given heat treatment at a temperature of 260ºC and the others did not receive heat treatment before being welded. The welding process used SMAW with CIN - 2 electrodes with a diameter of 3 mm. The test used the bending test on the face specimens according to the American Welding Society D1.1 standard. The results showed that there was an effect of the preheating treatment on cast iron, which that the non-preheating specimens were easier to fracture than the preheating specimens. Thus, it can be concluded that welding with preheating is better than welding without preheating.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 63 tautan kepenulisan bersama · 32 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Sriwijaya University
  • Hiroshima University
  • Ulsan National Institute of Science and Technology
  • Qatar University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Gusni SushantiHiroshima University2
Sri Rizki Putri PrimandariUniversitas Negeri Padang2
Muhammad Djoni BustanSriwijaya University1
Sri HaryatiSriwijaya University1
Dori YuvendaUniversitas Negeri Padang1
Remon LapisaUniversitas Negeri Padang1
Krismadinata KrismadinataUniversitas Negeri Padang1
Andre KurniawanUniversitas Negeri Padang1
Tarig ElshaaraniAfiliasi tidak diketahui1
Yus Donald ChaniagoUlsan National Institute of Science and Technology1
Mohamed A. GabbasaAfiliasi tidak diketahui1
Muneer Mohammed Ba-AbbadQatar University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect of Preheating and Non-Preheating in Cast Iron Welding Toward Mechanical Properties</dc:title>
	<dc:creator xml:lang="en">Sauri, Fauzan</dc:creator>
	<dc:creator xml:lang="en">Mulianti, Mulianti</dc:creator>
	<dc:subject xml:lang="en">Effect of Welding</dc:subject>
	<dc:subject xml:lang="en">Preheating</dc:subject>
	<dc:subject xml:lang="en">Cast iron</dc:subject>
	<dc:subject xml:lang="en">Bending Test</dc:subject>
	<dc:subject xml:lang="en">SMAW</dc:subject>
	<dc:description xml:lang="en">Cast iron material is a material that has brittle properties and is less able to withstand stress due to the welding cycle caused by flake graphite in cast iron. Because of these problems, in connecting cast iron materials using the SMAW welding method, it is necessary to have heat treatment (preheating) to avoid the welding problems on the properties of cast iron. The purpose of this study is to determine the effect of heating and non-heating on the cast iron before the welding process. Therefore, this research will play a crucial contribution as a reference for cast iron welding researchers and cast iron welding process. The method of the research was experimental research, where the measurement results were obtained directly from the specimens. The welding was using an open V seam. The specimen used was cast iron with a thickness of 8 mm. One cast iron was given heat treatment at a temperature of 260ºC and the others did not receive heat treatment before being welded. The welding process used SMAW with CIN - 2 electrodes with a diameter of 3 mm. The test used the bending test on the face specimens according to the American Welding Society D1.1 standard. The results showed that there was an effect of the preheating treatment on cast iron, which that the non-preheating specimens were easier to fracture than the preheating specimens. Thus, it can be concluded that welding with preheating is better than welding without preheating.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2020-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/72</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v3i2.7272</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 3 No. 2 (2020): Regular Issue; 70-74</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/72/35</dc:relation>
</oai_dc:dc>