Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Numerical analysis of flow characteristics of the oil-water mixture in stratified-annular horizontal pipe

Teknomekanik · Vol. 5 No. 2 (2022) · hlm. 80–89

DOI
10.24036/teknomekanik.v5i2.14572
ISSN
2621-8720, 2621-9980
Terbit
2022-12-15
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The loss of oil fluid flow in the piping system in the petroleum industry due to friction is the cause of low efficiency. To reduce friction loss, the viscosity of petroleum can be lowered by adding water as a mixture. Actually, the flow loss in a piping system is influenced by several factors including flow pattern, fluid type, flow velocity, flow pressure and pipe diameter. This study aims to determine the effect of flow patterns on changes in velocity in the two-phase flow of oil and water in a piping system. This numerical analysis research was carried out using Fluent 6.2 software with variations in the velocity of the oil-water mixture: 0.2, 0.4 and 0.6 m/s. The simulation results show that the greatest pressure loss occurs at a fluid velocity of 0.6 m/s where the flow is stratified mixed. While the smallest pressure loss at a mixture velocity of 0.2 m/s when the flow is stratified smooth. From the results of the study, it can be concluded that the increase in fluid flow velocity has a positive correlation with the increase in the value of flow losses in the pipe.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 137 tautan kepenulisan bersama · 41 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • National Cheng Kung University
  • Iloilo Science and Technology University
  • Vinh Long University of Technology Education
  • Tun Hussein Onn University of Malaysia
  • Institut Agama Islam Negeri Kendari
  • Universitas Syiah Kuala
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
A YufrizalUniversitas Negeri Padang6
Refdinal RefdinalUniversitas Negeri Padang5
Purwantono PurwantonoUniversitas Negeri Padang4
Budi SyahriUniversitas Negeri Padang3
Junil ArdiUniversitas Negeri Padang3
Yolli FernandaUniversitas Negeri Padang3
Andre KurniawanUniversitas Negeri Padang2
M Iksan ArdiyansyahUniversitas Negeri Padang2
Pebrian PebrianUniversitas Negeri Padang2
Syahrul SyahrulInstitut Agama Islam Negeri Kendari2
Wakhinuddin WakhinuddinUniversitas Negeri Padang2
Muhammad Agung PratomoUniversitas Negeri Padang2
Tze Kiong TeeTun Hussein Onn University of Malaysia1
Waskito WaskitoUniversitas Negeri Padang1
Rizky Ema WulansariUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1
Ganda AgustianUniversitas Negeri Padang1
Ahmad Halim SidiqUniversitas Negeri Padang1
Abdul AzizUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Nofri HelmiUniversitas Negeri Padang1
Muhammad AkhbarUniversitas Negeri Padang1
Muhibuddin MuhibuddinUniversitas Syiah Kuala1
Muhammad RizkiUniversitas Negeri Padang1
Rodger EliabIloilo Science and Technology University1
Herman ZulhafrilUniversitas Negeri Padang1
Kimberly June TespoerIloilo Science and Technology University1
Remon LapisaUniversitas Negeri Padang1
Nanang QosimPoliteknik Negeri Malang1
Zainal AbadiUniversitas Negeri Padang1
Wei-Ting ZhuangNational Cheng Kung University1
Eko IndrawanUniversitas Negeri Padang1
Shih-Chen ShiNational Cheng Kung University1
Dieter RahmadiawanNational Cheng Kung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Numerical analysis of flow characteristics of the oil-water mixture in stratified-annular horizontal pipe</dc:title>
	<dc:creator xml:lang="en">Erizon, Nelvi</dc:creator>
	<dc:creator xml:lang="en">Jasman, Jasman</dc:creator>
	<dc:creator xml:lang="en">Irzal, Irzal</dc:creator>
	<dc:creator xml:lang="en">Aldio, Muhammad Fikhri</dc:creator>
	<dc:creator xml:lang="en">Saputra, Aprizal</dc:creator>
	<dc:creator xml:lang="en">Tin, Chau Trung</dc:creator>
	<dc:subject xml:lang="en">Numerical anlysis</dc:subject>
	<dc:subject xml:lang="en">Fluid-mixture velocity</dc:subject>
	<dc:subject xml:lang="en">Pressure drop</dc:subject>
	<dc:subject xml:lang="en">Horizontal pipe</dc:subject>
	<dc:description xml:lang="en">The loss of oil fluid flow in the piping system in the petroleum industry due to friction is the cause of low efficiency. To reduce friction loss, the viscosity of petroleum can be lowered by adding water as a mixture. Actually, the flow loss in a piping system is influenced by several factors including flow pattern, fluid type, flow velocity, flow pressure and pipe diameter. This study aims to determine the effect of flow patterns on changes in velocity in the two-phase flow of oil and water in a piping system. This numerical analysis research was carried out using Fluent 6.2 software with variations in the velocity of the oil-water mixture: 0.2, 0.4 and 0.6 m/s. The simulation results show that the greatest pressure loss occurs at a fluid velocity of 0.6 m/s where the flow is stratified mixed. While the smallest pressure loss at a mixture velocity of 0.2 m/s when the flow is stratified smooth. From the results of the study, it can be concluded that the increase in fluid flow velocity has a positive correlation with the increase in the value of flow losses in the pipe.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2022-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/145</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v5i2.14572</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 5 No. 2 (2022): Regular Issue; 80-89</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/145/129</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Nelvi Erizon, Jasman Jasman, Irzal Irzal, Muhammad Fikhri Aldio, Aprizal Saputra, Chau Trung Tin (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>