Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparison of variation in the building shapes and the window-to-wall ratio by concerning energy consumption for thermal comfort and lighting

Teknomekanik · Vol. 6 No. 2 (2023) · hlm. 136–147

DOI
10.24036/teknomekanik.v6i2.27972
ISSN
2621-8720, 2621-9980
Terbit
2023-12-20
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Currently, an influential factor contributing to thermal comfort home design is the incorporation of energy-efficient passive design principles. It is exemplified by strategic window placement, the utilization of thermally efficient materials, and effective insulation. It exerts a substantial influence on thermal comfort and electrical consumption. This paper examines the effect of building shape and window-to-wall ratio (WWR) on thermal comfort and lighting energy consumption in residential houses in tropical climates. The lighting electricity and the adaptive thermal discomfort hours of 30 different models of houses were obtained using OpenStudio and EnergyPlus simulation software. The models were developed for three building shapes (square, rectangle, and L-shaped), and each model was varied in five models of window-to-wall ratios. Results indicate that the square-shaped model with a WWR of 10% will provide the lowest energy consumption in thermal comfort had 420.45 kWh/m2. On the other side, the lowest energy consumption in lighting is the square-shaped model with a WWR of 50% had 507.95 kWh/m2. Thus, the recommendation is to use the square-shaped house that represents the most efficient air conditioning system while the other WWR set also produce the most natural luminaire. It is because the percentage of WWR increased will result in more energy consumption in air cooling but slightly lower energy consumption in lighting. However, when considering aesthetics and freshness, the WWR of the 50% model will offer a better deal.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 173 tautan kepenulisan bersama · 72 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Politeknik Negeri Malang
  • Andalas University
  • Institut Teknologi Sepuluh Nopember
  • De Montfort University
  • Politeknik Negeri Padang
  • Pertamina (Indonesia)
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dori YuvendaUniversitas Negeri Padang5
Jasman JasmanUniversitas Negeri Padang4
Randi Purnama PutraUniversitas Negeri Padang3
Krismadinata KrismadinataUniversitas Negeri Padang3
Sri Rizki Putri PrimandariUniversitas Negeri Padang3
Dani HarmantoDe Montfort University3
Nanang QosimPoliteknik Negeri Malang3
Waskito WaskitoUniversitas Negeri Padang3
Purwantono PurwantonoUniversitas Negeri Padang3
Wanda AfnisonUniversitas Negeri Padang2
Milana MilanaUniversitas Negeri Padang2
Nelvi ErizonUniversitas Negeri Padang2
Dodi DeviantoAndalas University2
Ferra YanuarAndalas University2
Primawati PrimawatiUniversitas Negeri Padang2
Fazrol RoziPoliteknik Negeri Padang2
Yolli FernandaUniversitas Negeri Padang2
Abdul AzizUniversitas Negeri Padang2
Eko IndrawanUniversitas Negeri Padang2
Muji SetiyoUniversitas Muhammadiyah Magelang1
Bambang SudarmantaInstitut Teknologi Sepuluh Nopember1
Jamaludin JamaludinInstitut Teknologi Sepuluh Nopember1
Oki MurazaPertamina (Indonesia)1
Rahadian ZainulUniversitas Negeri Padang1
Asnil AsnilAndalas University1
Anna Niska FauzaUniversitas Negeri Padang1
Ahmad ArifUniversitas Halu Oleo1
Dori YuvendaUniversitas Negeri Padang1
M. Yasep SetiawanUniversitas Negeri Padang1
Moh. HartonoPoliteknik Negeri Malang1
Am. MufarrihPoliteknik Negeri Malang1
Zakki Fuadi EmzainPoliteknik Negeri Malang1
Moh. Nasir HariyantoPoliteknik Negeri Malang1
Rizky Ema WulansariUniversitas Negeri Padang1
Yufrizal YufrizalUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparison of variation in the building shapes and the window-to-wall ratio by concerning energy consumption for thermal comfort and lighting</dc:title>
	<dc:creator xml:lang="en">Kurniawan, Andre</dc:creator>
	<dc:creator xml:lang="en">Lapisa, Remon</dc:creator>
	<dc:creator xml:lang="en">Setiawan, Muhammad Yasep</dc:creator>
	<dc:creator xml:lang="en">Rahim, Bulkia</dc:creator>
	<dc:creator xml:lang="en">Syahri, Budi</dc:creator>
	<dc:subject xml:lang="en">Shape effects</dc:subject>
	<dc:subject xml:lang="en">Window and wall</dc:subject>
	<dc:subject xml:lang="en">Luminaire optimization</dc:subject>
	<dc:subject xml:lang="en">Energy optimization</dc:subject>
	<dc:description xml:lang="en">Currently, an influential factor contributing to thermal comfort home design is the incorporation of energy-efficient passive design principles. It is exemplified by strategic window placement, the utilization of thermally efficient materials, and effective insulation. It exerts a substantial influence on thermal comfort and electrical consumption. This paper examines the effect of building shape and window-to-wall ratio (WWR) on thermal comfort and lighting energy consumption in residential houses in tropical climates. The lighting electricity and the adaptive thermal discomfort hours of 30 different models of houses were obtained using OpenStudio and EnergyPlus simulation software. The models were developed for three building shapes (square, rectangle, and L-shaped), and each model was varied in five models of window-to-wall ratios. Results indicate that the square-shaped model with a WWR of 10% will provide the lowest energy consumption in thermal comfort had 420.45 kWh/m2. On the other side, the lowest energy consumption in lighting is the square-shaped model with a WWR of 50% had 507.95 kWh/m2. Thus, the recommendation is to use the square-shaped house that represents the most efficient air conditioning system while the other WWR set also produce the most natural luminaire. It is because the percentage of WWR increased will result in more energy consumption in air cooling but slightly lower energy consumption in lighting. However, when considering aesthetics and freshness, the WWR of the 50% model will offer a better deal.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2023-12-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/279</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v6i2.27972</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 6 No. 2 (2023): Regular Issue; 136-147</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/279/77</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Andre Kurniawan, Remon Lapisa, Muhammad Yasep Setiawan, Bulkia Rahim, Budi Syahri (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>