Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparison of MCDM methods effectiveness in the selection of plastic injection molding machines

Teknomekanik · Vol. 7 No. 1 (2024) · hlm. 1–19

DOI
10.24036/teknomekanik.v7i1.29272
ISSN
2621-8720, 2621-9980
Terbit
2024-05-06
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

In each specific problem of finding the best solution among many available options, where each option has multiple criteria, multi criteria decision making methods are considered equally effective when they converge to the same optimal solution. Proximity Indexed Value, Preference Selection Index, Faire Un Choix Adéquat (in French), and Collaborative Unbiased Rank List Integration are four Multi Criteria Decision Making methods with very different characteristics. All these four methods have been used a lot in recent times. The effectiveness of these four methods have been confirmed to be comparable to other multi criteria decision making methods in many applications. However, the comparison of these four methods with each other has never been performed in any studies. This article is performed to fill that gap. These four methods have been used to find to the best option among five types of plastic injection molding machine. Ten criteria have been chosen to describe each alternative. Two different methods that have been used to calculate the weights for the criteria are the MEAN weight method and the CRiteria Importance Through Intercriteria Correlation weight method. Different scenarios have been created to compare the effectiveness of these four methods. The results have shown that the four multi criteria decision making methods mentioned above are equally effective in the selection of plastic injection molding machines. Among the five types of plastic injection molding machines, namely JSW J350EII-SPA ANBE-002-02, Meiki M-200B-SJ, Meiki M-350C-DF-SJ, JSW J350E II, and JSW J550E-C5, the JSW J550E-C5 is the best type.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 25 tautan kepenulisan bersama · 14 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Hanoi University of Industry
  • Comenius University Bratislava
  • University of Novi Sad
  • Kilis 7 Aralık University
  • Osmaniye Korkut Ata University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Duong Van DucAfiliasi tidak diketahui1
Mehmet ÖzçalıcıKilis 7 Aralık University1
Nazlı ErsoyOsmaniye Korkut Ata University1
Nguyen Chi BaoHanoi University of Industry1
Nguyen Hoai SonHanoi University of Industry1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparison of MCDM methods effectiveness in the selection of plastic injection molding machines</dc:title>
	<dc:creator xml:lang="en">Trung, Do Duc</dc:creator>
	<dc:creator xml:lang="en">Dudić, Branislav</dc:creator>
	<dc:creator xml:lang="en">Duc, Duong Van</dc:creator>
	<dc:creator xml:lang="en">Son, Nguyen Hoai</dc:creator>
	<dc:creator xml:lang="en">Ašonja, Aleksandar</dc:creator>
	<dc:subject xml:lang="en">MCDM</dc:subject>
	<dc:subject xml:lang="en">PIV method</dc:subject>
	<dc:subject xml:lang="en">PSI method</dc:subject>
	<dc:subject xml:lang="en">FUCA method</dc:subject>
	<dc:subject xml:lang="en">CURLI method</dc:subject>
	<dc:description xml:lang="en">In each specific problem of finding the best solution among many available options, where each option has multiple criteria, multi criteria decision making methods are considered equally effective when they converge to the same optimal solution. Proximity Indexed Value, Preference Selection Index, Faire Un Choix Adéquat (in French), and Collaborative Unbiased Rank List Integration are four Multi Criteria Decision Making methods with very different characteristics. All these four methods have been used a lot in recent times. The effectiveness of these four methods have been confirmed to be comparable to other multi criteria decision making methods in many applications. However, the comparison of these four methods with each other has never been performed in any studies. This article is performed to fill that gap. These four methods have been used to find to the best option among five types of plastic injection molding machine. Ten criteria have been chosen to describe each alternative. Two different methods that have been used to calculate the weights for the criteria are the MEAN weight method and the CRiteria Importance Through Intercriteria Correlation weight method. Different scenarios have been created to compare the effectiveness of these four methods. The results have shown that the four multi criteria decision making methods mentioned above are equally effective in the selection of plastic injection molding machines. Among the five types of plastic injection molding machines, namely JSW J350EII-SPA ANBE-002-02, Meiki M-200B-SJ, Meiki M-350C-DF-SJ, JSW J350E II, and JSW J550E-C5, the JSW J550E-C5 is the best type.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2024-05-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/292</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v7i1.29272</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 7 No. 1 (2024): Regular Issue; 1-19</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/292/78</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Do Duc Trung, Branislav Dudić, Duong Van Duc, Nguyen Hoai Son, Aleksandar Ašonja (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>