Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Infiltration capacity based on soil geophysical constants using artificial infiltration in residential land

Teknomekanik · Vol. 7 No. 2 (2024) · hlm. 126–138

DOI
10.24036/teknomekanik.v7i2.31372
ISSN
2621-8720, 2621-9980
Terbit
2024-12-25
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Conversion of catch-land into residential land in urban areas reduces infiltration, and increases surface flow and flood risk. Artificial infiltration is a potential solution to increase infiltration capacity, but its effectiveness is highly dependent on the physical characteristics of the soil, including geophysical constants. This study aims to determine the level of infiltration capacity based on the value of soil geophysical constants using artificial infiltration in residential land in Padang. Measurements were carried out using the Horton method and double-ring infiltrometer in several residential locations. The study results show that the soil characteristics of residential land in Padang consist of the soil texture of sand, loamy sand, and sandy loam, which have high moisture content, large fill weight, and low porosity, causing low infiltration rate and high surface flow. Artificial infiltration can significantly increase the infiltration capacity, especially on sandy soils with high hydraulic conductivity. The soil geophysical constant, k, is classified according to field measurement results. In the lower range of 1.2 < k ≤ 1.9, the average infiltration capacity was found at 625.1 mm/hour. Within the interval of 1.9 < k ≤ 2.6, the mean capacity decreased to 587.7 mm/hour, but in the upper interval of 2.6 < k ≤ 3.3, the average infiltration capacity was 499 mm/hour. Large soil geophysical constants reveal higher infiltration capacity, while small geophysical constants indicate low infiltration capacity.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 47 tautan kepenulisan bersama · 16 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Andalas University
  • Sekolah Tinggi Agama Islam Negeri Teungku Dirundeng Meulaboh
  • Institut Agama Islam Negeri Langsa
  • Universitas Negeri Padang
  • Politeknik Negeri Padang
  • State University of Semarang
  • National University of Malaysia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Pujiono PujionoState University of Semarang1
Rozlinda Mohamed FadzilNational University of Malaysia1
Nurul AzmiAfiliasi tidak diketahui1
Rini Nurul AmlaAfiliasi tidak diketahui1
Asriani AsrianiAfiliasi tidak diketahui1
Khairuddin KhairuddinAfiliasi tidak diketahui1
Hardiani HardianiAfiliasi tidak diketahui1
Desra Ainun IlianaAfiliasi tidak diketahui1
Ismail ArafahNorth Sumatra Islamic University1
Muji MuliaUniversitas Islam Negeri Ar-Raniry1
Muhajir Al-FairusySekolah Tinggi Agama Islam Negeri Teungku Dirundeng Meulaboh1
Syamsuar SyamsuarSekolah Tinggi Agama Islam Negeri Teungku Dirundeng Meulaboh1
Muhammad Rusdi bin MuhammaddiahInstitut Agama Islam Negeri Langsa1
Muhazir MuhazirInstitut Agama Islam Negeri Langsa1
Halking HalkingAfiliasi tidak diketahui1
Surya DharmaAfiliasi tidak diketahui1
Mangido NainggolanAfiliasi tidak diketahui1
Ulfa Dwi IndrianiAfiliasi tidak diketahui1
Ni Kadek SuwardaniAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Infiltration capacity based on soil geophysical constants using artificial infiltration in residential land</dc:title>
	<dc:creator xml:lang="en">Andayono, Totoh</dc:creator>
	<dc:creator xml:lang="en">Mera, Mas</dc:creator>
	<dc:creator xml:lang="en">Junaidi, Junaidi</dc:creator>
	<dc:creator xml:lang="en">Dalrino, Dalrino</dc:creator>
	<dc:subject xml:lang="en">infiltration capacity</dc:subject>
	<dc:subject xml:lang="en">artificial infiltration</dc:subject>
	<dc:subject xml:lang="en">residential land</dc:subject>
	<dc:subject xml:lang="en">geophysical constants</dc:subject>
	<dc:description xml:lang="en">Conversion of catch-land into residential land in urban areas reduces infiltration, and increases surface flow and flood risk. Artificial infiltration is a potential solution to increase infiltration capacity, but its effectiveness is highly dependent on the physical characteristics of the soil, including geophysical constants. This study aims to determine the level of infiltration capacity based on the value of soil geophysical constants using artificial infiltration in residential land in Padang. Measurements were carried out using the Horton method and double-ring infiltrometer in several residential locations. The study results show that the soil characteristics of residential land in Padang consist of the soil texture of sand, loamy sand, and sandy loam, which have high moisture content, large fill weight, and low porosity, causing low infiltration rate and high surface flow. Artificial infiltration can significantly increase the infiltration capacity, especially on sandy soils with high hydraulic conductivity. The soil geophysical constant, k, is classified according to field measurement results. In the lower range of 1.2 &amp;lt; k ≤ 1.9, the average infiltration capacity was found at 625.1 mm/hour. Within the interval of 1.9 &amp;lt; k ≤ 2.6, the mean capacity decreased to 587.7 mm/hour, but in the upper interval of 2.6 &amp;lt; k ≤ 3.3, the average infiltration capacity was 499 mm/hour. Large soil geophysical constants reveal higher infiltration capacity, while small geophysical constants indicate low infiltration capacity.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2024-12-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/313</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v7i2.31372</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 7 No. 2 (2024): Regular Issue; 126-138</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/313/87</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Totoh Andayono, Mas Mera, Junaidi Junaidi, Dalrino Dalrino</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>