Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Uniaxial and biaxial hot pressing of PVDF films: A pathway toward high-performance piezoelectric sensors and energy harvesters

Teknomekanik · Vol. 9 No. 1 (2026) · hlm. 121–136

DOI
10.24036/teknomekanik.v9i1.44972
ISSN
2621-8720, 2621-9980
Terbit
2026-02-28
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

The piezoelectric efficiency of Poly (vinylidene fluoride) (PVDF) membranes becomes restricted by the challenge of generating and stabilizing electroactive β-phase during processing. Stretching requires control of deformation parameter, while solvent-based methods bring environmental and occupational health risks. This research suggests hot-pressing as an alternative method for enhancing β-phase fraction, utilizing multidirectional stress without solvent or chemical exposure. This study systematically compares uniaxial hot-pressing (Uniaxial HP) and biaxial hot-pressing (Biaxial HP) setups to determine which stress distribution is more effective at promoting changes and improving piezoelectric properties in PVDF membranes. The main objective of this research is to systematically evaluate and compare the impacts of uniaxial and biaxial hot-pressing on the crystalline phase transformation and electromechanical performance, including the piezoelectric coefficient (d33) and output voltage response of PVDF membranes. PVDF pellets were hot-pressed at 220o C under a pressure of 60 MPa for 15 minutes followed by rapid quenching in ice water. X-Ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed phase composition, correlated with performance via the piezoelectric coefficient (d33), and assessed piezoelectric activity. Experimental results show that biaxial loading provides a higher b-phase fraction (50.47%) compared to untreated membranes (47.80%) and UHP samples (49.30%). The crystallinity and the piezoelectric coefficient also increased to 49% and 18.8 pC/N, respectively. Biaxial stress pattern during hot-pressing induces favourable thermodynamic and kinetic conditions for b-phase expansion. Beyond phase-related results, the approach delivers competitive piezoelectric effectiveness while maintaining simplicity and reducing solvent-dependent processing steps.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 138 tautan kepenulisan bersama · 65 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Medan Area University
  • State University of Medan
  • Universiti Teknikal Malaysia Melaka
  • National Research and Innovation Agency
  • Chung Yuan Christian University
  • National University of Malaysia
  • Universitas Muhammadiyah Sumatera Utara
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tino HermantoMedan Area University3
Habib SatriaMedan Area University2
SuhermanAfiliasi tidak diketahui1
IswandiMedan Area University1
Muhammad IdrisMedan Area University1
Abu Bakar SulongNational University of Malaysia1
Arya Rudi NasutionUniversitas Muhammadiyah Sumatera Utara1
Hermansyah HermasnyahMedan Area University1
Ruztamreen JenalUniversiti Teknikal Malaysia Melaka1
A. R. DullahUniversiti Teknikal Malaysia Melaka1
Adly Zulqarnain bin MohamadUniversiti Teknikal Malaysia Melaka1
Moranain MungkinMedan Area University1
Dadan RamdanMedan Area University1
Dina MaizanaMedan Area University1
Indri DayanaMedan Area University1
Nidya ChitraningrumNational Research and Innovation Agency1
Siti Utari RahayuNational Chung Hsing University1
Mega Puspita SariMedan Area University1
Syofyan Anwar SyahputraRiau University1
Junaidi JunaidiAfiliasi tidak diketahui1
Ade Irma SagalaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Uniaxial and biaxial hot pressing of PVDF films: A pathway toward high-performance piezoelectric sensors and energy harvesters</dc:title>
	<dc:creator xml:lang="en">Suprapto, Suprapto</dc:creator>
	<dc:creator xml:lang="en">jubaidah, Jubaidah</dc:creator>
	<dc:creator xml:lang="en">Triono, Selamat</dc:creator>
	<dc:creator xml:lang="en">Gunawan, Harianto</dc:creator>
	<dc:creator xml:lang="en">Lisyanto, Lisyanto</dc:creator>
	<dc:creator xml:lang="en">Nugraha, Aditya Sukma</dc:creator>
	<dc:creator xml:lang="en">Aldori, Yopan rahmad</dc:creator>
	<dc:subject xml:lang="en">PVDF</dc:subject>
	<dc:subject xml:lang="en">uniaxial and biaxial</dc:subject>
	<dc:subject xml:lang="en">hot press</dc:subject>
	<dc:subject xml:lang="en">piezoelectric</dc:subject>
	<dc:description xml:lang="en">The piezoelectric efficiency of Poly (vinylidene fluoride) (PVDF) membranes becomes restricted by the challenge of generating and stabilizing electroactive β-phase during processing. Stretching requires control of deformation parameter, while solvent-based methods bring environmental and occupational health risks. This research suggests hot-pressing as an alternative method for enhancing β-phase fraction, utilizing multidirectional stress without solvent or chemical exposure. This study systematically compares uniaxial hot-pressing (Uniaxial HP) and biaxial hot-pressing (Biaxial HP) setups to determine which stress distribution is more effective at promoting changes and improving piezoelectric properties in PVDF membranes. The main objective of this research is to systematically evaluate and compare the impacts of uniaxial and biaxial hot-pressing on the crystalline phase transformation and electromechanical performance, including the piezoelectric coefficient (d33) and output voltage response of PVDF membranes. PVDF pellets were hot-pressed at 220o C under a pressure of 60 MPa for 15 minutes followed by rapid quenching in ice water. X-Ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirmed phase composition, correlated with performance via the piezoelectric coefficient (d33), and assessed piezoelectric activity. Experimental results show that biaxial loading provides a higher b-phase fraction (50.47%) compared to untreated membranes (47.80%) and UHP samples (49.30%). The crystallinity and the piezoelectric coefficient also increased to 49% and 18.8 pC/N, respectively. Biaxial stress pattern during hot-pressing induces favourable thermodynamic and kinetic conditions for b-phase expansion. Beyond phase-related results, the approach delivers competitive piezoelectric effectiveness while maintaining simplicity and reducing solvent-dependent processing steps.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/449</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i1.44972</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 1 (2026): Regular Issue; 121-136</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/449/116</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Suprapto Suprapto, Jubaidah, Selamat Triono, Harianto Gunawan, Lisyanto Lisyanto, Aditya Sukma Nugraha, Yopan rahmad Aldori (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>