Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparative analysis of bio-inspired and topology-optimized lattices under compressive loading

Teknomekanik · Vol. 9 No. 1 (2026) · hlm. 1–24

DOI
10.24036/teknomekanik.v9i1.45472
ISSN
2621-8720, 2621-9980
Terbit
2026-02-28
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Lattice structure design is still dominated by strut-based forms and surface-based shapes, such as triply periodic minimal surfaces (TPMS), which both exhibit overlapping limitations. Strut lattices often show strong anisotropy because their response depends heavily on cell orientation, while TPMS lattices are difficult to adjust when bounded by geometric constraints. These conditions eventually led to stagnation in the development of lattice morphology. Hybrid and topology-optimization methods have appeared as possible alternatives, but many of them still produce modified versions of classical patterns. This study examined two lattice geometries: the Pyramorph, inspired by the shape of a pyramid, and the Topomorph, generated through a topology optimization framework. Both structures were designed using a CAD unit cell patterning technique and manufactured using the FDM method, with relative densities ranging from 0.40 to 0.44. Their mechanical behaviour was examined through FEA simulation and uniaxial compression testing. The parameter variations included cell orientations of 0°, 15°, 30°, and 45°, and cell sizes of 8 mm and 12 mm within a 24 mm specimen. The Topomorph showed superior strength, reaching 15–20 MPa, while the Pyramorph reached only 7–8 MPa. The highest value, about 20.5 MPa, was obtained from the Topomorph at 0° and with an 8 mm cell size. Failure modes indicated buckling and delamination in the Pyramorph, while the Topomorph tended to collapse progressively. These findings indicate that topology optimization combined with CAD-based patterning could significantly improve lattice performance.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 57 tautan kepenulisan bersama · 35 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • National Research and Innovation Agency
  • Universitas Negeri Surabaya
  • Sapienza University of Rome
  • Hokkaido University
  • Petra Christian University
  • National Cheng Kung University
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Arif WahjudiInstitut Teknologi Sepuluh Nopember4
Agung Prijo BudijonoUniversitas Negeri Surabaya2
I Nyoman SutantraInstitut Teknologi Sepuluh Nopember2
Mustasyar PerkasaNational Research and Innovation Agency1
Jean Mario ValentinoNational Research and Innovation Agency1
Achmad SyaifudinInstitut Teknologi Sepuluh Nopember1
Lukman ShalahuddinNational Research and Innovation Agency1
Katsuhiko SASAKIHokkaido University1
Ian Hardianto SiahaanPetra Christian University1
I Nyoman SutantraInstitut Teknologi Sepuluh Nopember1
Aris PurwantoUniversitas Negeri Surabaya1
Po-Hung LinNational Cheng Kung University1
Alief WikartaInstitut Teknologi Sepuluh Nopember1
Femiana GapsariUniversity of Brawijaya1
Chandya AndikusumaInstitut Teknologi Sepuluh Nopember1
Julendra Bambang AriatedjaInstitut Teknologi Sepuluh Nopember1
Sze Wei KhooTunku Abdul Rahman University of Management and Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparative analysis of bio-inspired and topology-optimized lattices under compressive loading</dc:title>
	<dc:creator xml:lang="en">Arifin, Ahmad Anas</dc:creator>
	<dc:creator xml:lang="en">Batan, I Made Londen</dc:creator>
	<dc:creator xml:lang="en">Bici, Michele</dc:creator>
	<dc:creator xml:lang="en">Wahjudi, Arif</dc:creator>
	<dc:creator xml:lang="en">Pramono, Agus Sigit</dc:creator>
	<dc:subject xml:lang="en">lattice structures</dc:subject>
	<dc:subject xml:lang="en">topology optimization</dc:subject>
	<dc:subject xml:lang="en">compressive behaviour</dc:subject>
	<dc:subject xml:lang="en">material engineering</dc:subject>
	<dc:description xml:lang="en">Lattice structure design is still dominated by strut-based forms and surface-based shapes, such as triply periodic minimal surfaces (TPMS), which both exhibit overlapping limitations. Strut lattices often show strong anisotropy because their response depends heavily on cell orientation, while TPMS lattices are difficult to adjust when bounded by geometric constraints. These conditions eventually led to stagnation in the development of lattice morphology. Hybrid and topology-optimization methods have appeared as possible alternatives, but many of them still produce modified versions of classical patterns. This study examined two lattice geometries: the Pyramorph, inspired by the shape of a pyramid, and the Topomorph, generated through a topology optimization framework. Both structures were designed using a CAD unit cell patterning technique and manufactured using the FDM method, with relative densities ranging from 0.40 to 0.44. Their mechanical behaviour was examined through FEA simulation and uniaxial compression testing. The parameter variations included cell orientations of 0°, 15°, 30°, and 45°, and cell sizes of 8 mm and 12 mm within a 24 mm specimen. The Topomorph showed superior strength, reaching 15–20 MPa, while the Pyramorph reached only 7–8 MPa. The highest value, about 20.5 MPa, was obtained from the Topomorph at 0° and with an 8 mm cell size. Failure modes indicated buckling and delamination in the Pyramorph, while the Topomorph tended to collapse progressively. These findings indicate that topology optimization combined with CAD-based patterning could significantly improve lattice performance.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/454</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i1.45472</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 1 (2026): Regular Issue; 1-24</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/454/106</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Ahmad Anas Arifin, I Made Londen Batan, Michele Bici, Arif Wahjudi, Agus Sigit Pramono (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>