Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Welding of thermoplastics printed by fused filament fabrication: A critical review of joining mechanisms and relationships between processing, structure, and properties

Teknomekanik · Vol. 9 No. 3 (2026) · hlm. 396–411

DOI
10.24036/teknomekanik.v9i3.55272
ISSN
2621-8720, 2621-9980
Terbit
2026-10-31
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Fused filament fabrication (FFF) technology, also known as fused deposition modeling (FDM), enables the production of thermoplastic components with complex geometries, but remains limited by the printer’s build volume. Welding can join separately printed components. However, layered structures, infill configurations, porosity, and interlayer bonding affect joint formation and strength. This article critically reviews six welding techniques for FFF-printed thermoplastic components: friction stir welding, friction stir spot welding, rotary friction welding, ultrasonic welding, laser joining, and microwave-assisted welding. The review focuses on joining mechanisms, process parameters, material characteristics, mechanical performance, and failure mechanisms. The results indicate that joint quality depends on the interaction among welding parameters, polymer type, infill structure, tool or interface design, and joint configuration. Increasing process energy does not always improve joint strength because excessive heating can cause thermal degradation and deformation, while insufficient material consolidation can limit joint integrity. Direct comparisons between techniques are still limited by differences in materials, specimen geometries, joint configurations, and testing methods. Evidence regarding microwave-assisted welding for joining separately printed components is also still limited. Future research needs to integrate printing and welding parameters, correlate structural characteristics and defects with mechanical performance, and improve the consistency of testing and reporting. Such an approach is necessary to clarify the relationships between process, structure, and properties and to support the development of reliable joints for engineering applications.

Kata kunci

Jaringan kolaborasi para penulis

32 penulis · 117 tautan kepenulisan bersama · 36 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • De Montfort University
  • Universitas Halu Oleo
  • Andalas University
  • National Kaohsiung University of Science and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Randi Purnama PutraUniversitas Negeri Padang2
Dori YuvendaUniversitas Negeri Padang2
Remon LapisaUniversitas Negeri Padang2
Wanda AfnisonUniversitas Negeri Padang2
Milana MilanaUniversitas Negeri Padang2
Hendri NurdinUniversitas Negeri Padang2
Anna Niska FauzaUniversitas Negeri Padang1
Ahmad ArifUniversitas Halu Oleo1
Dori YuvendaUniversitas Negeri Padang1
M. Yasep SetiawanUniversitas Negeri Padang1
Nizwardi JalinusUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Salmat SalmatUniversitas Negeri Padang1
Yoszi Mingsih AnapertaAfiliasi tidak diketahui1
Andre KurniawanUniversitas Negeri Padang1
Waskito WaskitoUniversitas Negeri Padang1
Purwantono PurwantonoUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Hairul AbralAndalas University1
Fitrah QalbinaUniversitas Negeri Padang1
Delima Yanti SariUniversitas Negeri Padang1
Rifelino RifelinoUniversitas Negeri Padang1
Bagas SantosoUniversitas Negeri Padang1
Hastuti HastutiUniversitas Negeri Padang1
Tsung-Liang WuNational Kaohsiung University of Science and Technology1
Budi SyahriUniversitas Negeri Padang1
Yogi Dian AlfanaUniversitas Negeri Padang1
Donny FernandezUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Welding of thermoplastics printed by fused filament fabrication: A critical review of joining mechanisms and relationships between processing, structure, and properties</dc:title>
	<dc:creator xml:lang="en">Nabawi, Rahmat Azis</dc:creator>
	<dc:creator xml:lang="en">Harmanto, Dani</dc:creator>
	<dc:creator xml:lang="en">Prasetya, Febri</dc:creator>
	<dc:creator xml:lang="en">Alfana, Yogi Dian</dc:creator>
	<dc:subject xml:lang="en">fused filament fabrication</dc:subject>
	<dc:subject xml:lang="en">thermoplastic welding</dc:subject>
	<dc:subject xml:lang="en">friction stir welding</dc:subject>
	<dc:subject xml:lang="en">ultrasonic welding</dc:subject>
	<dc:subject xml:lang="en">laser joining</dc:subject>
	<dc:subject xml:lang="en">process-structure-property relationship</dc:subject>
	<dc:description xml:lang="en">Fused filament fabrication (FFF) technology, also known as fused deposition modeling (FDM), enables the production of thermoplastic components with complex geometries, but remains limited by the printer’s build volume. Welding can join separately printed components. However, layered structures, infill configurations, porosity, and interlayer bonding affect joint formation and strength. This article critically reviews six welding techniques for FFF-printed thermoplastic components: friction stir welding, friction stir spot welding, rotary friction welding, ultrasonic welding, laser joining, and microwave-assisted welding. The review focuses on joining mechanisms, process parameters, material characteristics, mechanical performance, and failure mechanisms. The results indicate that joint quality depends on the interaction among welding parameters, polymer type, infill structure, tool or interface design, and joint configuration. Increasing process energy does not always improve joint strength because excessive heating can cause thermal degradation and deformation, while insufficient material consolidation can limit joint integrity. Direct comparisons between techniques are still limited by differences in materials, specimen geometries, joint configurations, and testing methods. Evidence regarding microwave-assisted welding for joining separately printed components is also still limited. Future research needs to integrate printing and welding parameters, correlate structural characteristics and defects with mechanical performance, and improve the consistency of testing and reporting. Such an approach is necessary to clarify the relationships between process, structure, and properties and to support the development of reliable joints for engineering applications.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-10-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/552</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i3.55272</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 3 (2026): Regular Issue; 396-411</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/552/141</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Rahmat Azis Nabawi, Dani Harmanto, Febri Prasetya, Yogi Dian Alfana (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>