Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Enhancing the hardness of low-carbon steel by pack carburizing using shellfish shell powder as a calcium carbonate activator

Teknomekanik · Vol. 9 No. 3 (2026) · hlm. 330–347

DOI
10.24036/teknomekanik.v9i3.56572
ISSN
2621-8720, 2621-9980
Terbit
2026-10-16
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

This study investigates the potential of shellfish shell powder as a natural source of calcium carbonate (CaCO₃) for improving the pack carburizing of AISI 1020 low-carbon steel. AISI 1020 Low-carbon steel is commonly used in engineering applications because of its favorable mechanical properties and machinability; however, its relatively low surface hardness may limit its wear resistance. Carburization was performed at 950 °C for 6 h using three conditions: an untreated control, charcoal only, and a mixture of charcoal shellfish shell powder. Surface characterization was conducted using FE-SEM/EDS, while hardness was evaluated using the Brinell Hardness test. The charcoal-shellfish shell powder specimen achieved the highest average hardness (481.44 BHN), which was significantly higher than those of the charcoal specimen (387.40 BHN) and the control specimen (216.77 BHN) (p < 0.001). FE-SEM observations showed that the charcoal–shellfish shell powder specimen exhibited distinct surface morphology, while EDS analysis revealed a higher surface carbon concentration and the presence of calcium, indicating a more effective carburizing environment than the charcoal-only treatment. These findings indicate that the shellfish shell powder effectively enhanced hardness, resulting in the formation of a carbon-enriched surface. The novelty of this study lies in the use of shellfish shell powder derived from shell waste as an alternative natural activator, and in the quantitative validation its effectiveness through statistical analysis, demonstrating its potential as a cost-effective and environmentally sustainable substitute for conventional carburizing activators.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 122 tautan kepenulisan bersama · 22 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • Tun Hussein Onn University of Malaysia
  • Institut Agama Islam Negeri Kendari
  • King Mongkut's Institute of Technology Ladkrabang
  • Iloilo Science and Technology University
  • Politeknik Negeri Malang
  • Vinh Long University of Technology Education
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nelvi ErizonUniversitas Negeri Padang7
Irzal IrzalUniversitas Negeri Padang6
A YufrizalUniversitas Negeri Padang3
Purwantono PurwantonoUniversitas Negeri Padang3
Andre KurniawanUniversitas Negeri Padang3
Junil ArdiUniversitas Negeri Padang2
Abdul AzizUniversitas Negeri Padang2
Remon LapisaUniversitas Negeri Padang2
M Iksan ArdiyansyahUniversitas Negeri Padang1
Ramli RamliUniversitas Negeri Padang1
Rio AndeskoUniversitas Negeri Padang1
Pebrian PebrianUniversitas Negeri Padang1
Ahmad Halim SidiqUniversitas Negeri Padang1
Syahrul SyahrulInstitut Agama Islam Negeri Kendari1
Wakhinuddin WakhinuddinUniversitas Negeri Padang1
Bahrul AminUniversitas Negeri Padang1
Alan NovendraUniversitas Negeri Padang1
Sai Kham LeKing Mongkut's Institute of Technology Ladkrabang1
Yolli FernandaUniversitas Negeri Padang1
Muhammad Agung PratomoUniversitas Negeri Padang1
Zetri FirmandaUniversitas Negeri Padang1
Herman ZulhafrilUniversitas Negeri Padang1
Kimberly June TespoerIloilo Science and Technology University1
Nanang QosimPoliteknik Negeri Malang1
Zainal AbadiUniversitas Negeri Padang1
Rifelino RifelinoUniversitas Negeri Padang1
Eko IndrawanUniversitas Negeri Padang1
Muhammad Fikhri AldioUniversitas Negeri Padang1
Aprizal SaputraUniversitas Negeri Padang1
Chau Trung TinVinh Long University of Technology Education1
Anna Niska FauzaUniversitas Negeri Padang1
Fitrah QalbinaUniversitas Negeri Padang1
Hendri NurdinUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Enhancing the hardness of low-carbon steel by pack carburizing using shellfish shell powder as a calcium carbonate activator</dc:title>
	<dc:creator xml:lang="en">Adri, Junil</dc:creator>
	<dc:creator xml:lang="en">Parmanoan, Durain</dc:creator>
	<dc:creator xml:lang="en">Refdinal, Refdinal</dc:creator>
	<dc:creator xml:lang="en">Jasman, Jasman</dc:creator>
	<dc:creator xml:lang="en">Rahim, Bulkia</dc:creator>
	<dc:creator xml:lang="en">Marlianna, Meri</dc:creator>
	<dc:creator xml:lang="en">Sern, Lai Chee</dc:creator>
	<dc:subject xml:lang="en">hardness</dc:subject>
	<dc:subject xml:lang="en">low-carbon steel</dc:subject>
	<dc:subject xml:lang="en">pack carburizing</dc:subject>
	<dc:subject xml:lang="en">shellfish shell powder</dc:subject>
	<dc:description xml:lang="en">This study investigates the potential of shellfish shell powder as a natural source of calcium carbonate (CaCO₃) for improving the pack carburizing of AISI 1020 low-carbon steel. AISI 1020 Low-carbon steel is commonly used in engineering applications because of its favorable mechanical properties and machinability; however, its relatively low surface hardness may limit its wear resistance. Carburization was performed at 950 °C for 6 h using three conditions: an untreated control, charcoal only, and a mixture of charcoal shellfish shell powder. Surface characterization was conducted using FE-SEM/EDS, while hardness was evaluated using the Brinell Hardness test. The charcoal-shellfish shell powder specimen achieved the highest average hardness (481.44 BHN), which was significantly higher than those of the charcoal specimen (387.40 BHN) and the control specimen (216.77 BHN) (p &amp;lt; 0.001). FE-SEM observations showed that the charcoal–shellfish shell powder specimen exhibited distinct surface morphology, while EDS analysis revealed a higher surface carbon concentration and the presence of calcium, indicating a more effective carburizing environment than the charcoal-only treatment. These findings indicate that the shellfish shell powder effectively enhanced hardness, resulting in the formation of a carbon-enriched surface. The novelty of this study lies in the use of shellfish shell powder derived from shell waste as an alternative natural activator, and in the quantitative validation its effectiveness through statistical analysis, demonstrating its potential as a cost-effective and environmentally sustainable substitute for conventional carburizing activators.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-10-16</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/565</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i3.56572</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 3 (2026): Regular Issue; 330-347</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/565/137</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Junil Adri, Durain Parmanoan, Refdinal Refdinal, Jasman Jasman, Bulkia Rahim, Meri Marlianna, Lai Chee Sern (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>