Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Trade-offs in thermal and mechanical properties of cellulose films from bacterial cellulose powder induced by ultrasonication duration

Teknomekanik · Vol. 9 No. 2 (2026) · hlm. 272–284

DOI
10.24036/teknomekanik.v9i2.57372
ISSN
2621-8720, 2621-9980
Terbit
2026-06-15
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Understanding the trade-offs between thermal and mechanical properties is crucial for optimizing the performance of cellulose films from bacterial cellulose powders (BCP). This study leverages ultrasonication as an eco-friendly method to enhance these properties in BCP-based films while investigating the consequences of varying ultrasonication durations. BCP was sonicated at 250 W for 15 and 30 minutes. Results demonstrated that increasing ultrasonication duration significantly improves tensile strength, toughness, and transparency. The 30-minute sonication yielded the most robust and transparent films, with the highest mechanical strength and toughness. Conversely, while a shorter sonication of 15 minutes slightly improved the thermal stability of the films, increasing Tmax from 317°C for non-sonicated films to 351°C, a longer duration of 30 minutes reduced Tmax to 323°C. This illustrates a clear trade-off between enhancing mechanical properties and maintaining thermal stability. The findings provide insights into a simple yet effective approach for producing environmentally friendly, non-wood-based BC films, emphasizing the need to balance both thermal and mechanical enhancements through controlled ultrasonication.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 107 tautan kepenulisan bersama · 81 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Padang
  • National Cheng Kung University
  • Andalas University
  • University of Technology Malaysia
  • National Research and Innovation Agency
  • University of Indonesia
  • Universidade Federal do Rio Grande do Norte
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Eko IndrawanUniversitas Negeri Padang4
A YufrizalUniversitas Negeri Padang3
Febrian IlhamsyahAndalas University3
Chia-Feng HsiehNational Cheng Kung University2
Wei-Ting ZhuangNational Cheng Kung University2
Budi SyahriUniversitas Negeri Padang2
Yolli FernandaUniversitas Negeri Padang2
Irzal IrzalUniversitas Negeri Padang2
Zainal AbadiUniversitas Negeri Padang2
Navid AslfattahiCzech Technical University in Prague2
Shi Shih‐ChenNational Cheng Kung University2
Athaya RamadhanAndalas University2
Xiao-Ning TsaiNational Cheng Kung University1
Anne ZulfiaUniversity of Indonesia1
Adinda OktavianiUniversity of Indonesia1
Rahmat Azis NabawiUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Dedi Rosa Putra CupuRiau University1
Dedison GasniAndalas University1
Zahrul FuadiUniversitas Syiah Kuala1
Zulhanafi PaimanUniversity of Technology Malaysia1
Chong Wei QuanUniversity of Technology Malaysia1
Kahar OsmanUniversity of Technology Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Trade-offs in thermal and mechanical properties of cellulose films from bacterial cellulose powder induced by ultrasonication duration</dc:title>
	<dc:creator xml:lang="en">Rahmadiawan, Dieter</dc:creator>
	<dc:creator xml:lang="en">Baskara, Tio</dc:creator>
	<dc:creator xml:lang="en">Abral, Hairul</dc:creator>
	<dc:creator xml:lang="en">Sugiarti, Eni</dc:creator>
	<dc:creator xml:lang="en">Muslimin, Ahmad Novi</dc:creator>
	<dc:creator xml:lang="en">Shi, Shih-Chen</dc:creator>
	<dc:creator xml:lang="en">Santos, Thiago F.</dc:creator>
	<dc:creator xml:lang="en">Laghari, Imtiaz Ali</dc:creator>
	<dc:subject xml:lang="en">bacterial cellulose</dc:subject>
	<dc:subject xml:lang="en">cellulose nanocrystal</dc:subject>
	<dc:subject xml:lang="en">thermal resistance</dc:subject>
	<dc:subject xml:lang="en">ultrasonication duration</dc:subject>
	<dc:description xml:lang="en">Understanding the trade-offs between thermal and mechanical properties is crucial for optimizing the performance of cellulose films from bacterial cellulose powders (BCP). This study leverages ultrasonication as an eco-friendly method to enhance these properties in BCP-based films while investigating the consequences of varying ultrasonication durations. BCP was sonicated at 250 W for 15 and 30 minutes. Results demonstrated that increasing ultrasonication duration significantly improves tensile strength, toughness, and transparency. The 30-minute sonication yielded the most robust and transparent films, with the highest mechanical strength and toughness. Conversely, while a shorter sonication of 15 minutes slightly improved the thermal stability of the films, increasing Tmax from 317°C for non-sonicated films to 351°C, a longer duration of 30 minutes reduced Tmax to 323°C. This illustrates a clear trade-off between enhancing mechanical properties and maintaining thermal stability. The findings provide insights into a simple yet effective approach for producing environmentally friendly, non-wood-based BC films, emphasizing the need to balance both thermal and mechanical enhancements through controlled ultrasonication.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-06-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/573</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i2.57372</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 2 (2026): Regular Issue; 272-284</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/573/125</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Dieter Rahmadiawan, Tio Baskara, Hairul Abral, Eni Sugiarti, Ahmad Novi Muslimin, Shih-Chen Shi, Thiago F. Santos, Imtiaz Ali Laghari (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>