Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Friction performance of palm oil-based trimethylolpropane ester containing bacterial cellulose and sorbitan monostearate: A Taguchi-based study

Teknomekanik · Vol. 9 No. 3 (2026) · hlm. 361–377

DOI
10.24036/teknomekanik.v9i3.59272
ISSN
2621-8720, 2621-9980
Terbit
2026-10-25
Penerbit
Universitas Negeri Padang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Growing environmental concerns have prompted researchers to investigate renewable alternatives to mineral oils. Palm oil is a promising vegetable oil for use as a lubricant base stock due to its renewability, biodegradability, low environmental toxicity, and high viscosity. In this study, palm oil was chemically modified by a two-step esterification/transesterification process with trimethylolpropane (TMP) to yield palm oil-based TMP ester (PTMPE) as a base oil. Bacterial cellulose (BC) from nata de coco and sorbitan monostearate (Span 60) were incorporated into the base oil at different concentrations as an additive and a surfactant, respectively. Friction analysis was carried out using a four-ball tribotester at an elevated temperature. The Taguchi method was applied to optimize the experiment, with the mass fractions of BC and Span 60, as well as ultrasonication time, as input factors, and the coefficient of friction (COF) as the response. The results showed that the lowest COF was obtained when 0.3 wt% bacterial cellulose and 0.9 wt% Span 60 were added to the PTMPE ester and ultrasonicated for 10 minutes. In contrast to other studies that concentrated on water- or synthetic-based carriers, the friction-reducing performance of bacterial cellulose in PTMPE was investigated, resulting in a 16.45% decrease in COF under a 392 N load. Analysis of variance (ANOVA) showed that none of the investigated parameters were statistically significant in explaining variations in the coefficient of friction. However, the ultrasonication time had the largest estimated contribution among the investigated factors, accounting for almost 50%.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 59 tautan kepenulisan bersama · 50 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Andalas University
  • University of Technology Malaysia
  • Universitas Negeri Padang
  • National Cheng Kung University
  • National Research and Innovation Agency
  • Riau University
  • Universitas Syiah Kuala
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dieter RahmadiawanNational Cheng Kung University2
Imtiaz Ali LaghariQuaid-e-Awam University of Engineering, Science and Technology2
A YufrizalUniversitas Negeri Padang1
Febrian IlhamsyahAndalas University1
Rahmat Azis NabawiUniversitas Negeri Padang1
Syahril SyahrilUniversitas Negeri Padang1
Shih-Chen ShiNational Cheng Kung University1
Thiago F. SantosUniversidade Federal do Rio Grande do Norte1
Tio BaskaraAndalas University1
Eni SugiartiNational Research and Innovation Agency1
Ahmad Novi MusliminNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 10 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Friction performance of palm oil-based trimethylolpropane ester containing bacterial cellulose and sorbitan monostearate: A Taguchi-based study</dc:title>
	<dc:creator xml:lang="en">Cupu, Dedi Rosa Putra</dc:creator>
	<dc:creator xml:lang="en">Abral, Hairul</dc:creator>
	<dc:creator xml:lang="en">Gasni, Dedison</dc:creator>
	<dc:creator xml:lang="en">Fuadi, Zahrul</dc:creator>
	<dc:creator xml:lang="en">Paiman, Zulhanafi</dc:creator>
	<dc:creator xml:lang="en">Quan, Chong Wei</dc:creator>
	<dc:creator xml:lang="en">Osman, Kahar</dc:creator>
	<dc:subject xml:lang="en">palm oil</dc:subject>
	<dc:subject xml:lang="en">biolubricant</dc:subject>
	<dc:subject xml:lang="en">bacterial cellulose</dc:subject>
	<dc:subject xml:lang="en">coefficient of friction</dc:subject>
	<dc:description xml:lang="en">Growing environmental concerns have prompted researchers to investigate renewable alternatives to mineral oils. Palm oil is a promising vegetable oil for use as a lubricant base stock due to its renewability, biodegradability, low environmental toxicity, and high viscosity. In this study, palm oil was chemically modified by a two-step esterification/transesterification process with trimethylolpropane (TMP) to yield palm oil-based TMP ester (PTMPE) as a base oil. Bacterial cellulose (BC) from nata de coco and sorbitan monostearate (Span 60) were incorporated into the base oil at different concentrations as an additive and a surfactant, respectively. Friction analysis was carried out using a four-ball tribotester at an elevated temperature. The Taguchi method was applied to optimize the experiment, with the mass fractions of BC and Span 60, as well as ultrasonication time, as input factors, and the coefficient of friction (COF) as the response. The results showed that the lowest COF was obtained when 0.3 wt% bacterial cellulose and 0.9 wt% Span 60 were added to the PTMPE ester and ultrasonicated for 10 minutes. In contrast to other studies that concentrated on water- or synthetic-based carriers, the friction-reducing performance of bacterial cellulose in PTMPE was investigated, resulting in a 16.45% decrease in COF under a 392 N load. Analysis of variance (ANOVA) showed that none of the investigated parameters were statistically significant in explaining variations in the coefficient of friction. However, the ultrasonication time had the largest estimated contribution among the investigated factors, accounting for almost 50%.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Padang</dc:publisher>
	<dc:date>2026-10-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/592</dc:identifier>
	<dc:identifier>10.24036/teknomekanik.v9i3.59272</dc:identifier>
	<dc:source xml:lang="en">Teknomekanik; Vol. 9 No. 3 (2026): Regular Issue; 361-377</dc:source>
	<dc:source>2621-8720</dc:source>
	<dc:source>2621-9980</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>http://teknomekanik.ppj.unp.ac.id/index.php/teknomekanik/article/view/592/139</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Dedi Rosa Putra Cupu, Hairul Abral, Dedison Gasni, Zahrul Fuadi, Zulhanafi Paiman, Chong Wei Quan, Kahar Osman (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>