Melola Discovery

← Melola Discovery

Jurnal SINTA 1

HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) PADA PROSES FABRIKASI PLATE TANKI 42-T-501A PT PERTAMINA (PERSERO) RU VI BALONGAN

The Indonesian Journal Of Occupational Safety and Health · Vol. 5 No. 2 (2017) · hlm. 192–203

DOI
10.20473/ijosh.v5i2.2016.192-203
ISSN
2540-7872, 2301-8046
Terbit
2017-05-05
Penerbit
Universitas Airlangga
Bahasa
eng

Abstrak

HIRA is a process to identify all risk factor in a company then attempt to quantify the risk and determine whether it is acceptable or not. This study aimed to identify and assess occupational risk in the fabrication plate process, tank 42-T-501A, at PT Pertamina (Persero) RU VI Balongan. It is an observational and a cross-sectional study based on research time. The object of this study focuses on PT Pertamina (Persero) RU VI Balongan's fabrication plate, tank 42-T-501A, workers with a total population of 20 people plus 1 safety inspector. Primary data obtained through observations and interviews which afterward presented in the form of tables and diagrams to be analyzed descriptively. The result showed that there were 6 procedures with 24 potential hazards and 24 occupational risks in the fabrication process tank 42-T- 501A. Based on the result of risk assessment, there are 6 low risk hazards, 6 medium risk hazards, 11 high risk hazards, and 1 extreme risk hazard from the total of 24 hazards in the fabrication plate process tank 42-T-501A. Finally, this study concludes that the dominant risk in the fabrication plate process tank 42-T-501A is high risk (45%). Examples founded in high risk category are stricken by plate, light exposure of torch, fume exposure of torch, sparks of cutting torch, light exposure of welding, fume exposure of welding, sparks of welding, explosions of sandblasting tube and explosions of sandblasting hose.Keywords: hazard identification, risk assessment, fabrication plate

Jaringan kolaborasi para penulis

19 penulis · 38 tautan kepenulisan bersama · 15 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Airlangga
  • Universitas Bhakti Kencana
  • University of Brawijaya
  • UIN Sunan Ampel Surabaya
  • Hasanuddin University
  • University of Indonesia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Suherdin SuherdinUniversitas Bhakti Kencana1
Tri MartianaUniversitas Airlangga1
Isna FadilaUniversitas Airlangga1
Arya Zulfikar ParamartaAfiliasi tidak diketahui1
Abdullah Al MamunAfiliasi tidak diketahui1
Tofan Agung Eka PrasetyaUniversitas Airlangga1
Nur Anisah RahmawatiUniversitas Airlangga1
Herman Bagus DwicahyoUniversitas Airlangga1
Intan KristiantiUniversitas Airlangga1
Nita Desti RahmawatiUniversitas Airlangga1
Indri Hapsari SusilowatiUniversity of Indonesia1
Syamsiar Siang RussengHasanuddin University1
Ahsan AhsanUniversity of Brawijaya1
Ahmad Rido’i Yuda PrayogiUniversitas Airlangga1
Pudji RahmawatiUIN Sunan Ampel Surabaya1
Noeroel WidajatiUniversitas Airlangga1
Irsyad YudisiantoUniversitas Airlangga1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/IJOSH/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">HAZARD IDENTIFICATION AND RISK ASSESSMENT (HIRA) PADA PROSES FABRIKASI PLATE TANKI 42-T-501A PT PERTAMINA (PERSERO) RU VI BALONGAN</dc:title>
	<dc:creator>Ambarani, Aristy Yulanda</dc:creator>
	<dc:creator>Tualeka, Abdul Rohim</dc:creator>
	<dc:description xml:lang="en-US">HIRA is a process to identify all risk factor in a company then attempt to quantify the risk and determine whether it is acceptable or not. This study aimed to identify and assess occupational risk in the fabrication plate process, tank 42-T-501A, at PT Pertamina (Persero) RU VI Balongan. It is an observational and a cross-sectional study based on research time. The object of this study focuses on PT Pertamina (Persero) RU VI Balongan's fabrication plate, tank 42-T-501A, workers with a total population of 20 people plus 1 safety inspector. Primary data obtained through observations and interviews which afterward presented in the form of tables and diagrams to be analyzed descriptively. The result showed that there were 6 procedures with 24 potential hazards and 24 occupational risks in the fabrication process tank 42-T- 501A. Based on the result of risk assessment, there are 6 low risk hazards, 6 medium risk hazards, 11 high risk hazards, and 1 extreme risk hazard from the total of 24 hazards in the fabrication plate process tank 42-T-501A. Finally, this study concludes that the dominant risk in the fabrication plate process tank 42-T-501A is high risk (45%). Examples founded in high risk category are stricken by plate, light exposure of torch, fume exposure of torch, sparks of cutting torch, light exposure of welding, fume exposure of welding, sparks of welding, explosions of sandblasting tube and explosions of sandblasting hose.Keywords: hazard identification, risk assessment, fabrication plate</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Airlangga</dc:publisher>
	<dc:date>2017-05-05</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/IJOSH/article/view/4188</dc:identifier>
	<dc:identifier>10.20473/ijosh.v5i2.2016.192-203</dc:identifier>
	<dc:source xml:lang="en-US">The Indonesian Journal of Occupational Safety and Health; Vol. 5 No. 2 (2016): The Indonesian Journal of Occupational Safety and Health; 192-203</dc:source>
	<dc:source>2540-7872</dc:source>
	<dc:source>2301-8046</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/IJOSH/article/view/4188/2832</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Aristy Yulanda Ambarani, Abdul Rohim Tualeka</dc:rights>
</oai_dc:dc>