Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Risk Management on Print Checking of Plastic Sacks Production in Sidoarjo Indonesia

The Indonesian Journal Of Occupational Safety and Health · Vol. 9 No. 1 (2020) · hlm. 55–65

DOI
10.20473/ijosh.v9i1.2020.55-65
ISSN
2540-7872, 2301-8046
Terbit
2020-04-30
Penerbit
Universitas Airlangga
Bahasa
eng

Abstrak

Introduction: Risk management is a management activity that aims to reduce risk to prevent negative impact. Calculation of the amount of risk was carried out to then determine whether the risk was acceptable. In printing activities, contact between humans and machines is unavoidable. The purpose of this study was to evaluate the risk of occupational safety management in the activity of print checking on stamping stage of plastic sacks production in Sidoarjo, Indonesia by conducting hazard identification, risk assessment which includes risk analysis and risk evaluation, control assessment, and residual risk assessment. This is an observational study with a cross sectional design. Methods: Data included primary and secondary data. Primary data were taken by interview and observation. Secondary data were taken from work accident data. Results: A total of 6 hazards were identified. Risk assessment recorded 2 low hazards category 2 medium hazards category, and 2 high risk hazards. Administrative control in the form of inspection and the use of PPE (Personal Protective Equipment) were implemented. Residual risk assessment shows that the implementation of controls was not optimal. The results of the residual risk assessment indicate that several risk categories fell into a lower category i.e 4 low hazards category and 2 high risk category hazards. Conclusion: The applied risk management has not been optimally implemented. It is recommended that the implementation of inspections is scheduled and a system for recording and reporting inspection findings is established. Keywords: hazard, printing checks, risk management

Jaringan kolaborasi para penulis

5 penulis · 7 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Airlangga
  • Sebelas Maret University
  • Universitas Nahdlatul Ulama Blitar
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khairul AnwarUniversitas Nahdlatul Ulama Blitar1
Bachtiar ChahyadhiSebelas Maret University1
Y. Denny A. WahyudionoUniversitas Airlangga1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/IJOSH/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Risk Management on Print Checking of Plastic Sacks Production in Sidoarjo Indonesia</dc:title>
	<dc:creator>Sari, Rizqy Kartika</dc:creator>
	<dc:creator>Wahyudiono, Denny A.</dc:creator>
	<dc:description xml:lang="en-US">Introduction: Risk management is a management activity that aims to reduce risk to prevent negative impact. Calculation of the amount of risk was carried out to then determine whether the risk was acceptable. In printing activities, contact between humans and machines is unavoidable. The purpose of this study was to evaluate the risk of occupational safety management in the activity of print checking on stamping stage of plastic sacks production in Sidoarjo, Indonesia by conducting hazard identification, risk assessment which includes risk analysis and risk evaluation, control assessment, and residual risk assessment. This is an observational study with a cross sectional design. Methods: Data included primary and secondary data. Primary data were taken by interview and observation. Secondary data were taken from work accident data. Results: A total of 6 hazards were identified. Risk assessment recorded 2 low hazards category  2 medium hazards category, and 2 high risk hazards. Administrative control in the form of inspection and the use of  PPE (Personal Protective Equipment) were implemented. Residual risk assessment shows that the implementation of controls was not optimal. The results of the residual risk assessment indicate that several risk categories fell into a lower category i.e  4 low hazards category and 2 high risk category hazards. Conclusion: The applied risk management has not been optimally implemented. It is recommended that the implementation of inspections is scheduled and a system for recording and reporting inspection findings is established. Keywords: hazard, printing checks, risk management</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Airlangga</dc:publisher>
	<dc:date>2020-04-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/IJOSH/article/view/14110</dc:identifier>
	<dc:identifier>10.20473/ijosh.v9i1.2020.55-65</dc:identifier>
	<dc:source xml:lang="en-US">The Indonesian Journal of Occupational Safety and Health; Vol. 9 No. 1 (2020): The Indonesian Journal of Occupational Safety and Health; 55-65</dc:source>
	<dc:source>2540-7872</dc:source>
	<dc:source>2301-8046</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/IJOSH/article/view/14110/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 The Indonesian Journal of Occupational Safety and Health</dc:rights>
</oai_dc:dc>