Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Analysis of c-silica Dust Content in Respirable Dust in the Ceramic Industry

The Indonesian Journal Of Occupational Safety and Health · Vol. 9 No. 2 (2020) · hlm. 205–213

DOI
10.20473/ijosh.v9i2.2020.205-213
ISSN
2540-7872, 2301-8046
Terbit
2020-08-19
Penerbit
Universitas Airlangga
Bahasa
eng

Abstrak

Introduction: Exposure to hazards in the work environment in the ceramic industry includes silica dust and heat temperatures. The purpose of this research was to analyze the respirable dust and c-silica dust, in addition to calculate c-silica dust in respirated dust. In addition, an evaluation of the results of dust measurements was also carried out by comparing it to the threshold value. Method: This was a descriptive study by testing samples of respirable dust and c-silica dust in the work place. The research was conducted at one of the ceramic industries in East Java. Data collection was carried out on all workers in the production division of 39 peoples. The measurement method for respirable dust analysis used the gravimetric method based on NIOSH method (NMAM 0600, 1998), while the analysis of c-silica dust used XRD equipment in accordance with the NIOSH method (NMAM 7500, 2003). Results: The results of the measurement of respirable dust in 39 respondents obtained a range of values of 0.019 - 0.0563 mg/m3 with an average of 0.19 mg/m3, while for c-silica dust, the results were at the range of 0.0020 - 0.3129 mg/m3 with an average of 0.07 mg/m3. The percentage of c-silica dust content in the ceramics industry in residential dust is different by 5 - 74.3% with the average of 34.89%. Conclusion: Evaluation of the results of measurement of respirable dust found that all samples were below the threshold value, while for c-silica dust, there were 27 samples with values above the threshold. On the average, there is 34.89% level of c-silica in respirable dust in the ceramic industry.Keywords: ceramic industry, c-silica, respirable dust

Jaringan kolaborasi para penulis

14 penulis · 44 tautan kepenulisan bersama · 24 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Airlangga
  • Kementerian Kesehatan Republik Indonesia
  • Universitas Nahdlatul Ulama Surabaya
  • Poltekkes Kemenkes Surabaya
  • Universiti of Malaysia Sabah
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fain Roudlotull JannahAfiliasi tidak diketahui1
Khuliyah Candraning DiyanahUniversitas Airlangga1
Aditya Sukma PawitraUniversitas Airlangga1
Siti NurhidayatiKementerian Kesehatan Republik Indonesia1
Yudied Agung MirasaKementerian Kesehatan Republik Indonesia1
Zainul Amiruddin ZakariaUniversiti of Malaysia Sabah1
Rania Ichwana WicaksonoUniversitas Airlangga1
Winarko WinarkoPoltekkes Kemenkes Surabaya1
Kholifah Firsayanti JuwonoAfiliasi tidak diketahui1
Firani Dwi Ayu PujawatiAfiliasi tidak diketahui1
Ratna Ayu RatriwardhaniAfiliasi tidak diketahui1
Naufal Wafiq BelvatrivanoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/IJOSH/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The Analysis of c-silica Dust Content in Respirable Dust in the Ceramic Industry</dc:title>
	<dc:creator>Sahri, Moch.</dc:creator>
	<dc:creator>Sunaryo, Merry</dc:creator>
	<dc:description xml:lang="en-US"> Introduction: Exposure to hazards in the work environment in the ceramic industry includes silica dust and heat temperatures. The purpose of this research was to analyze the respirable dust and c-silica dust, in addition to calculate c-silica dust in respirated dust. In addition, an evaluation of the results of dust measurements was also carried out by comparing it to the threshold value. Method: This was a descriptive study by testing samples of respirable dust and c-silica dust in the work place. The research was conducted at one of the ceramic industries in East Java. Data collection was carried out on all workers in the production division of 39 peoples. The measurement method for respirable dust analysis used the gravimetric method based on NIOSH method (NMAM 0600, 1998), while the analysis of c-silica dust used XRD equipment in accordance with the NIOSH method (NMAM 7500, 2003). Results: The results of the measurement of respirable dust in 39 respondents obtained a range of values of 0.019 - 0.0563 mg/m3 with an average of 0.19 mg/m3, while for c-silica dust, the results were at the range of 0.0020 - 0.3129 mg/m3 with an average of 0.07 mg/m3. The percentage of c-silica dust content in the ceramics industry in residential dust is different by 5 - 74.3% with the average of 34.89%. Conclusion: Evaluation of the results of measurement of respirable dust found that all samples were below the threshold value, while for c-silica dust, there were 27 samples with values above the threshold. On the average, there is 34.89% level of c-silica in respirable dust in the ceramic industry.Keywords: ceramic industry, c-silica, respirable dust</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Airlangga</dc:publisher>
	<dc:date>2020-08-19</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/IJOSH/article/view/15835</dc:identifier>
	<dc:identifier>10.20473/ijosh.v9i2.2020.205-213</dc:identifier>
	<dc:source xml:lang="en-US">The Indonesian Journal of Occupational Safety and Health; Vol. 9 No. 2 (2020): The Indonesian Journal of Occupational Safety and Health; 205-213</dc:source>
	<dc:source>2540-7872</dc:source>
	<dc:source>2301-8046</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/IJOSH/article/view/15835/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 The Indonesian Journal of Occupational Safety and Health</dc:rights>
</oai_dc:dc>