Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Description of Work Instructions as part of the Mechanical Hazard Risk Control in a Construction Company

The Indonesian Journal Of Occupational Safety and Health · Vol. 11 No. 3 (2022) · hlm. 367–376

DOI
10.20473/ijosh.v11i3.2022.367-376
ISSN
2540-7872, 2301-8046
Terbit
2022-11-10
Penerbit
Universitas Airlangga
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0

Abstrak

Introduction: The construction sector contributes the largest number of accident cases in Indonesia with an average incidence percentage of 32% each year. PT. WIKA Beton PPB Pasuruan uses sophisticated equipment to produce its products. To control the risk of mechanical hazards, the company has work instructions for each stage of the production process. This research aimed to provide an overview of how the work instructions are an effort to control the risk of mechanical hazards in the box pile production process at PT. WIKA Beton PPB Pasuruan. Method: This research was a descriptive study with a qualitative approach. The data collection technique used secondary data. The data used came from the company documents that included the IBPR-P document, Procedure document, and Work Instructions. Result: The mechanical hazards found in the production process of the box piles included being hit by a mold/product due to a broken sling, a PC Strand breaking during stressing, PC Strand punctured limbs, and the pile of products collapsing. The control of these four mechanical hazards was found in the Long Line Non-Turning Production Reinforcement Assembly Work Instructions, the Long Line Non-Turning Production Prestress Iron Drawing Work Instructions, and the Long Line Non-Rotating Production Product Stacking Work Instructions. Conclusion: In the work instruction documents, there were specific explanations of the work stages that relate the risk of mechanical hazards in the box pile production process. Implementing Work Instructions as a form of mechanical hazard control can reduce the level of potential hazard to a low risk level.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 47 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Airlangga
  • Universitas Muhammadiyah Malang
  • Sebelas Maret University
  • Universitas Nahdlatul Ulama Blitar
  • Sunan Gunung Djati State Islamic University Bandung
  • Politeknik Negeri Bengkalis
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ais Assana AthqiaAfiliasi tidak diketahui2
Nusavia Astra JinggaUniversitas Airlangga2
Priskila HananingrumUniversitas Airlangga2
Gading Diah Zahara PutriUniversitas Airlangga1
Merry AndriantiUniversitas Airlangga1
Innaha Ilma WardayaUniversitas Airlangga1
Nadya Putri DewantiUniversitas Airlangga1
Indah Budi LestariUniversitas Airlangga1
Hasnur Zalsabila ArnaUniversitas Airlangga1
Cempaka Puspita SiwiUniversitas Airlangga1
Tri MartianaUniversitas Airlangga1
Auliya VanissaUniversitas Airlangga1
Nungki Marlian YuliadarwatiUniversitas Muhammadiyah Malang1
Gandhi HartoyoAfiliasi tidak diketahui1
Khairul AnwarUniversitas Nahdlatul Ulama Blitar1
Bachtiar ChahyadhiSebelas Maret University1
Rizqy Kartika SariUniversitas Airlangga1
Kaira DeviUniversitas Airlangga1
Iskandar IskandarSunan Gunung Djati State Islamic University Bandung1
ZULKIFLI ZULKIFLIPoliteknik Negeri Bengkalis1
Noeroel WidajatiUniversitas Airlangga1
Indriati PaskariniUniversitas Airlangga1
Nabylla Sharfina Sekar NurriwantiUniversitas Airlangga1
Ayu Pertimasari Sekar HandayaniAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/IJOSH/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Description of Work Instructions as part of the Mechanical Hazard Risk Control in a Construction Company</dc:title>
	<dc:creator>Gitawangi, Sabhinaya Vanyaska</dc:creator>
	<dc:creator>Wahyudiono, Y. Denny A.</dc:creator>
	<dc:subject xml:lang="en-US">mechanical hazards</dc:subject>
	<dc:subject xml:lang="en-US">risk control</dc:subject>
	<dc:subject xml:lang="en-US">secure work</dc:subject>
	<dc:subject xml:lang="en-US">work instructionst</dc:subject>
	<dc:description xml:lang="en-US">Introduction: The construction sector contributes the largest number of accident cases in Indonesia with an average incidence percentage of 32% each year. PT. WIKA Beton PPB Pasuruan uses sophisticated equipment to produce its products. To control the risk of mechanical hazards, the company has work instructions for each stage of the production process. This research aimed to provide an overview of how the work instructions are an effort to control the risk of mechanical hazards in the box pile production process at PT. WIKA Beton PPB Pasuruan. Method: This research was a descriptive study with a qualitative approach. The data collection technique used secondary data. The data used came from the company documents that included the IBPR-P document, Procedure document, and Work Instructions. Result: The mechanical hazards found in the production process of the box piles included being hit by a mold/product due to a broken sling, a PC Strand breaking during stressing, PC Strand punctured limbs, and the pile of products collapsing. The control of these four mechanical hazards was found in the Long Line Non-Turning Production Reinforcement Assembly Work Instructions, the Long Line Non-Turning Production Prestress Iron Drawing Work Instructions, and the Long Line Non-Rotating Production Product Stacking Work Instructions. Conclusion: In the work instruction documents, there were specific explanations of the work stages that relate the risk of mechanical hazards in the box pile production process. Implementing Work Instructions as a form of mechanical hazard control can reduce the level of potential hazard to a low risk level.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Airlangga</dc:publisher>
	<dc:date>2022-11-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/IJOSH/article/view/26675</dc:identifier>
	<dc:identifier>10.20473/ijosh.v11i3.2022.367-376</dc:identifier>
	<dc:source xml:lang="en-US">The Indonesian Journal of Occupational Safety and Health; Vol. 11 No. 3 (2022): The Indonesian Journal of Occupational Safety and Health; 367-376</dc:source>
	<dc:source>2540-7872</dc:source>
	<dc:source>2301-8046</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/IJOSH/article/view/26675/22899</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 The Indonesian Journal Of Occupational Safety and Health</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>