Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Pengaruh Zat Aditif Urea terhadap Kuantitas Biodiesel Pada Reaksi Transesterfikasi

VALENSI · Vol. ume No. 1 (2014)

DOI
10.15408/jkv.v4i1.1049
ISSN
2548-3013, 2460-6065
Terbit
2014-11-14
Penerbit
Department of Chemistry, Faculty of Science and Technology Syarif Hidayatullah Jakarta State Islamic University
Bahasa
eng

Abstrak

Abstrak Asam lemak jenuh maupun tak jenuh pada minyak nabati memiliki potensi untuk diubah menjadi bahan kimia penyusun bahan bakar. Komponen asam lemak pada CPO RBD dengan komposisi terbesar adalah asam palmitat (38.2%) dan asam oleat (45.89%). Pembuatan biodiesel dalam penelitian ini menggunakan CPO (Crude Palm Oil) yang telah dimurnikan melalui reaksi transesterfikasi dengan pereaksi etanol dan katalisator KOH. Penambahan urea sebagai zat aditif pada reaksi dapat meningkatkan kualitas biodiesel yang diperoleh serta lebih efisien dalam tahapan pemurnian. Persentase kadar FAME (Fatty Acid Metyl Ester) setara dengan persen yield biodiesel pada proses reaksi tanpa penambahan urea adalah 90.34% dan mengalami peningkatan setelah penambahan urea sebesar 98%. Densitas yang dihasilkan pada reaksi tanpa zat aditif 0.868 gr/ ml dan reaksi dengan penambahan zat aditif memiliki densitas 0.866 gr/ml, kedua produk tersebut telah sesuai dengan standar SNI yakni berkisar 0.85–0.89. Kata kunci: biodiesel, CPO, zat aditif Abstract Saturated and unsaturated fatty acids in vegetable oils have potential to be converted into constituent of chemicals fuel. Fatty acids in the RBD palm oil with the largest composition are palmitic acid (38.2%) and oleic acid (45.89%). Production of fuel which substitute diesel fuel (biodiesel) from CPO (Crude Palm Oil) which has been purified by transesterification reaction with ethanol reagent and KOH catalyst. The addition of urea as an additive substancein the reaction to improve the quality as well as more efficient biodiesel obtained in the purification stages. Percentage value of FAME(Fatty Acid Metyl Ester)or yield biodiesel in the reaction without the addition of urea is 90.34% and after the addition of urea increased by 98%. Density of product that produced in the reaction without additives is 0.868 g / ml and for reaction with additives has a density of 0.866 g / ml, both of these products are met the criteria of SNI standards which ranged from 0.85 to 0.89. Keywords: Biodiesel, CPO, additive substance

Jaringan kolaborasi para penulis

15 penulis · 35 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Muslim Indonesia
  • Institut Teknologi Sepuluh Nopember
  • Hasanuddin University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mahfud MahfudInstitut Teknologi Sepuluh Nopember4
Achmad RoesyadiInstitut Teknologi Sepuluh Nopember3
Heri Septya KusumaInstitut Teknologi Sepuluh Nopember2
Idar MappangaraHasanuddin University1
Veny HadjuHasanuddin University1
Atjo WahyuHasanuddin University1
Adrianto PrihartantyoInstitut Teknologi Sepuluh Nopember1
Viqhi AshwieAfiliasi tidak diketahui1
Ruslan KallaInstitut Teknologi Sepuluh Nopember1
Alda Titania DewantiUniversitas Muslim Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://journal.uinjkt.ac.id/index.php/valensi/oai, pertama di-harvest 10 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Pengaruh Zat Aditif Urea terhadap Kuantitas Biodiesel  Pada Reaksi Transesterfikasi</dc:title>
	<dc:creator xml:lang="en">Rasyid, Rismawati</dc:creator>
	<dc:creator xml:lang="en">Kalsum, Ummu</dc:creator>
	<dc:creator xml:lang="en">Malik, Rahmaniah</dc:creator>
	<dc:creator xml:lang="en">Priyono, Dadi</dc:creator>
	<dc:creator xml:lang="en">Albar, Azis</dc:creator>
	<dc:description xml:lang="en">Abstrak Asam lemak jenuh maupun tak jenuh pada minyak nabati memiliki potensi untuk diubah menjadi bahan kimia penyusun bahan bakar . Komponen asam lemak pada CPO RBD dengan komposisi terbesar adalah asam palmitat (38.2%) dan asam oleat (45.89%).  Pembuatan biodiesel dalam penelitian ini menggunakan CPO (Crude Palm Oil) yang telah dimurnikan melalui reaksi transesterfikasi dengan pereaksi etanol dan katalisator KOH. Penambahan urea sebagai zat aditif pada reaksi dapat meningkatkan kualitas biodiesel yang diperoleh serta lebih efisien dalam tahapan pemurnian. Persentase kadar FAME (Fatty Acid Metyl Ester) setara dengan persen yield biodiesel pada proses reaksi tanpa penambahan urea adalah 90.34% dan mengalami peningkatan setelah penambahan urea sebesar 98%. Densitas yang dihasilkan pada reaksi tanpa zat aditif  0.868 gr/ ml dan reaksi dengan penambahan zat aditif memiliki densitas  0.866 gr/ml,  kedua produk tersebut telah sesuai dengan standar SNI yakni berkisar 0.85–0.89. Kata kunci : biodiesel, CPO, zat aditif    Abstract Saturated and unsaturated fatty acids in vegetable oils have potential to be converted into constituent of chemicals fuel. Fatty acids in the RBD palm oil with the largest composition are palmitic acid (38.2%) and oleic acid (45.89%). Production of fuel which substitute diesel fuel (biodiesel) from CPO (Crude Palm Oil) which has been purified by transesterification reaction with ethanol reagent and KOH catalyst. The addition of urea as an additive substancein the reaction to improve  the quality as well as more efficient biodiesel obtained in the purification stages. Percentage value of FAME(Fatty Acid Metyl Ester)or yield biodiesel in the reaction without the addition of urea is 90.34% and after the addition of urea increased by 98%. Density of product that produced in the reaction without additives is 0.868 g / ml and for reaction with additives has a density of 0.866 g / ml, both of these products are met the criteria of SNI  standards which ranged from 0.85 to 0.89. Keywords : Biodiesel, CPO, additive substance</dc:description>
	<dc:publisher xml:lang="en">Department of Chemistry, Faculty of Science and Technology Syarif Hidayatullah Jakarta State Islamic University</dc:publisher>
	<dc:date>2014-11-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.uinjkt.ac.id/index.php/valensi/article/view/1049</dc:identifier>
	<dc:identifier>10.15408/jkv.v4i1.1049</dc:identifier>
	<dc:source xml:lang="en">Jurnal Kimia Valensi; Jurnal Valensi Volume 4, No.1, Mei 2014</dc:source>
	<dc:source>2548-3013</dc:source>
	<dc:source>2460-6065</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.uinjkt.ac.id/index.php/valensi/article/view/1049/932</dc:relation>
	<dc:relation>https://journal.uinjkt.ac.id/index.php/valensi/article/view/1049/15825</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2019 Rismawati Rasyid, Ummu Kalsum, Rahmaniah Malik, Dadi Priyono, Azis Albar</dc:rights>
</oai_dc:dc>