Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Identification of batik making method from images using convolutional neural network with limited amount of data

Bulletin of Electrical Engineering and Informatics · Vol. 10 No. 3 (2021) · hlm. 1300–1307

DOI
10.11591/eei.v10i3.3035
ISSN
2089-3191, 2302-9285
Terbit
2021-05-21
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

This study aims to apply the convolutional neural network (CNN) to classify batik based on its manufacturing method, namely Batik Tulis which are hand drawn, Batik Cap where stamps are used to create the pattern, and Batik Printing which are printed using textile printing machine. We collected 40 images for each type of batik with a total of 120 images. To speed up and simplify the model building process, we implemented transfer learning with 3 basic CNN model architectures, namely ResNet, DenseNet, and VGG with batch normalization. We also experimented with building a new dataset by breaking each image down into 30 smaller images. Image augmentation was also used to prevent overfitting as well as to provide variations in the training data. The experimental results with 5-fold cross validation show that densenet169 gives the best results on the original dataset with an accuracy of 79.17% while vgg13_bn shows the best performance on the modified dataset with an accuracy of 87.61%. All models showed an increase in performance when using the modified dataset, except densenet169 which did not show a significant difference in performance.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 16 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Internasional Semen Indonesia
  • IPB University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Taufiqotul BariyahUniversitas Internasional Semen Indonesia2
Aditya IdeawanAfiliasi tidak diketahui1
Yohanes Indra RiskajayaUniversitas Internasional Semen Indonesia1
Ayunda Dwita SeptyaniUniversitas Internasional Semen Indonesia1
Christofora Hanny WijayaIPB University1
Zuraidah NasutionIPB University1
Yunita Siti MardhiyyahUniversitas Internasional Semen Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Identification of batik making method from images using convolutional neural network with limited amount of data</dc:title><dc:creator>Mohammad Arif Rasyidi</dc:creator><dc:creator>Ruktin Handayani</dc:creator><dc:creator>Fauzul Aziz</dc:creator><dc:subject>batik tulis</dc:subject><dc:subject>batik cap</dc:subject><dc:subject>batik printing</dc:subject><dc:subject>convolutional neural networks</dc:subject><dc:subject>transfer learning</dc:subject><dc:subject>limited training data</dc:subject><dc:subject>image augmentation</dc:subject><dc:subject>dataset splitting</dc:subject><dc:subject>ResNet</dc:subject><dc:subject>DenseNet</dc:subject><dc:subject>VGG</dc:subject><dc:description xml:lang="en">This study aims to apply the convolutional neural network (CNN) to classify batik based on its manufacturing method, namely Batik Tulis which are hand drawn, Batik Cap where stamps are used to create the pattern, and Batik Printing which are printed using textile printing machine. We collected 40 images for each type of batik with a total of 120 images. To speed up and simplify the model building process, we implemented transfer learning with 3 basic CNN model architectures, namely ResNet, DenseNet, and VGG with batch normalization. We also experimented with building a new dataset by breaking each image down into 30 smaller images. Image augmentation was also used to prevent overfitting as well as to provide variations in the training data. The experimental results with 5-fold cross validation show that densenet169 gives the best results on the original dataset with an accuracy of 79.17% while vgg13_bn shows the best performance on the modified dataset with an accuracy of 87.61%. All models showed an increase in performance when using the modified dataset, except densenet169 which did not show a significant difference in performance.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2021-05-21</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v10i3.3035</dc:identifier><dc:identifier>10.11591/eei.v10i3.3035</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 10 No 3 (2021); 1300-1307</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/3035/2173</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>