Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Implementation of environmental monitoring based on KAA IoT platform

Bulletin of Electrical Engineering and Informatics · Vol. 9 No. 6 (2020) · hlm. 2578–2587

DOI
10.11591/eei.v9i6.2578
ISSN
2089-3191, 2302-9285
Terbit
2020-08-25
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

Wireless sensor network (WSN) is a key to access the internet of things (IoT). The popularity of IoT and the prediction that there will be more devices connected to the Internet cause difficulties in integrating and making connected devices. The problem of IoT implementation are the lack of real-time data collection, processing, and the inability to provide continuous monitoring. To overcome these problems, this paper proposes an IoT device for monitoring environmental conditions through the IoT KAA platform that can be monitored anywhere and anytime in real time. The end device node consists of several sensors such as as temperature, humidity, carbon monoxide (CO) and carbon dioxide (CO2) sensors. The collected data from the end device node will be transmitted via a communication based on IEEE 802.15.4 to Raspberry Pi gateway, then sent to the KAA cloud server and saved into the database. The environmental data can be accessed via a web-based sensor application. We Analize the performance evaluation in terms of transaction, availability, data transfer, response time, transaction rate, throughput, and concurrency. The experimental result shows that the use of KAA IoT platform is better than that without platform.

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 79 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Elektronika Negeri Surabaya
  • National Taiwan University of Science and Technology
  • Universitas Amikom Yogyakarta
  • Institut Teknologi Sepuluh Nopember
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Desy Intan PermatasariPoliteknik Elektronika Negeri Surabaya3
Umi Sa’adahPoliteknik Elektronika Negeri Surabaya2
Andhik Ampuh YunantoPoliteknik Elektronika Negeri Surabaya2
Fadilah Fahrul HardiansyahPoliteknik Elektronika Negeri Surabaya2
Bih‐Hwang LeeNational Taiwan University of Science and Technology1
Amang SudarsonoPoliteknik Elektronika Negeri Surabaya1
Lutfi Rizal GozaliAfiliasi tidak diketahui1
Irma Rofni WulandariUniversitas Amikom Yogyakarta1
Hazna At ThooriqohInstitut Teknologi Sepuluh Nopember1
Iwan SyarifPoliteknik Elektronika Negeri Surabaya1
Fachrul RoziePoliteknik Elektronika Negeri Surabaya1
Edi SatriyantoPoliteknik Elektronika Negeri Surabaya1
Irma WulandariPoliteknik Elektronika Negeri Surabaya1
Muhammad Reza PahleviPoliteknik Elektronika Negeri Surabaya1
Dufan Quraish ShihabPoliteknik Elektronika Negeri Surabaya1
Yuliarta Rizki NusantokoPoliteknik Elektronika Negeri Surabaya1
Aji Sapta PramulenPoliteknik Elektronika Negeri Surabaya1
Widi SarinastitiPoliteknik Elektronika Negeri Surabaya1
Maulidita Setya PutriPoliteknik Elektronika Negeri Surabaya1
Marwah Insan KamilPoliteknik Elektronika Negeri Surabaya1
Akhmad AlimudinPoliteknik Elektronika Negeri Surabaya1
Setiawardhana SetiawardhanaPoliteknik Elektronika Negeri Surabaya1
Putri LianaPoliteknik Elektronika Negeri Surabaya1
Hary OktaviantoPoliteknik Elektronika Negeri Surabaya1
I Made Adiswara WiramaPoliteknik Elektronika Negeri Surabaya1
Rusminto Tjatur WidodoPoliteknik Elektronika Negeri Surabaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Implementation of environmental monitoring based on KAA IoT platform</dc:title><dc:creator>M. Udin Harun Al Rasyid</dc:creator><dc:creator>M. Husni Mubarrok</dc:creator><dc:creator>Jauari Akhmad Nur Hasim</dc:creator><dc:subject>environmental monitoring</dc:subject><dc:subject>wireless sensor networks</dc:subject><dc:subject>Internet of Things</dc:subject><dc:subject>IEEE 802.15.4</dc:subject><dc:subject>Raspberry Pi gateway</dc:subject><dc:subject>temperature and humidity sensors</dc:subject><dc:subject>carbon monoxide sensor</dc:subject><dc:subject>CO2 sensor</dc:subject><dc:subject>real-time data acquisition</dc:subject><dc:subject>cloud storage</dc:subject><dc:subject>web-based monitoring application</dc:subject><dc:subject>performance evaluation</dc:subject><dc:description xml:lang="en">Wireless sensor network (WSN) is a key to access the internet of things (IoT). The popularity of IoT and the prediction that there will be more devices connected to the Internet cause difficulties in integrating and making connected devices. The problem of IoT implementation are the lack of real-time data collection, processing, and the inability to provide continuous monitoring. To overcome these problems, this paper proposes an IoT device for monitoring environmental conditions through the IoT KAA platform that can be monitored anywhere and anytime in real time. The end device node consists of several sensors such as as temperature, humidity, carbon monoxide (CO) and carbon dioxide (CO2) sensors. The collected data from the end device node will be transmitted via a communication based on IEEE 802.15.4 to Raspberry Pi gateway, then sent to the KAA cloud server and saved into the database. The environmental data can be accessed via a web-based sensor application. We Analize the performance evaluation in terms of transaction, availability, data transfer, response time, transaction rate, throughput, and concurrency. The experimental result shows that the use of KAA IoT platform is better than that without platform.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2020-08-25</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v9i6.2578</dc:identifier><dc:identifier>10.11591/eei.v9i6.2578</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 9 No 6 (2020); 2578-2587</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/2578/1841</dc:relation></oai_dc:dc>