Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A novel automated feature selection based approach to recognize cauliflower disease

Bulletin of Electrical Engineering and Informatics · Vol. 12 No. 6 (2023) · hlm. 3541–3551

DOI
10.11591/eei.v12i6.5359
ISSN
2089-3191, 2302-9285
Terbit
2023-10-11
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

Cauliflower disease is a primary cause of reduced cauliflower yield. Preventing cauliflower disease requires early diagnosis. In the scope of this study, we suggested an agro-medical expert system that would make it easier to diagnose cauliflower disease. In this method, a digital image must be taken off the phone or handled device to diagnose cauliflower sickness. A data augmentation technique was initially used to construct a vast data set. The disease-affected parts of the cauliflower were then segmented using k-means clustering. Following that, ten statistical and gray-level co-occurrence matrix (GLCM) features were retrieved from the segmented pictures. After choosing the top n features (N ranged from 5 to 10), the synthetic minority oversampling technique (SMOTE) approach was used to handle training datasets with different amounts of each feature. After that, we utilized five machine learning (ML) algorithms and evaluated their performance using seven performance evaluation matrices for both augmented and non-augmented datasets. The same procedure was performed on both datasets. Then, we use both datasets to test how well the classifier works. Logistic regression (LR) is the most accurate method for the top nine features in the augmented dataset (90.77%).

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 89 tautan kepenulisan bersama · 28 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Daffodil International University
  • Dhaka University of Engineering & Technology
  • Bangladesh University of Professionals
  • European University of Bangladesh
  • International University of Business Agriculture and Technology
  • Military Institute of Science and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Shourav MollaDaffodil International University2
Md. Obaidur RahamanDhaka University of Engineering & Technology1
Mohammod Abul KashemDhaka University of Engineering & Technology1
Most. Fahmida AkterBangladesh University of Professionals1
Sovon ChakrabortyEuropean University of Bangladesh1
Marzia AhmedDaffodil International University1
Shobnom MustaryDhaka University of Engineering & Technology1
Mariam AkterDaffodil International University1
Nishat SultanaDaffodil International University1
Md. Zahid HasanDaffodil International University1
Saima AfrinDaffodil International University1
Tafsirul Islam NibirDaffodil International University1
Mst. Fahmida MuntasimDaffodil International University1
Md. Shakil MoharramDaffodil International University1
M. M. ImranAfiliasi tidak diketahui1
Md Faruk AbdullaDaffodil International University1
Md. Murad HossinDaffodil International University1
Md Rifat BhuiyanDaffodil International University1
Rabea Akter HiraInternational University of Business Agriculture and Technology1
Tamim KhanDaffodil International University1
Imran MahmudDaffodil International University1
Raisul Islam RafiDaffodil International University1
Umme UmaimaMilitary Institute of Science and Technology1
Md. Ariful Islam ArifDaffodil International University1
Shahed HossainDaffodil International University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">A novel automated feature selection based approach to recognize cauliflower disease</dc:title><dc:creator>Rashiduzzaman Shakil</dc:creator><dc:creator>Bonna Akter</dc:creator><dc:creator>F. M. Javed Mehedi Shamrat</dc:creator><dc:creator>Sheak Rashed Haider Noori</dc:creator><dc:subject>plant disease diagnosis</dc:subject><dc:subject>automatic feature selection</dc:subject><dc:subject>gray level co-occurrence matrix</dc:subject><dc:subject>K-means clustering</dc:subject><dc:subject>image segmentation</dc:subject><dc:subject>SMOTE</dc:subject><dc:subject>data augmentation</dc:subject><dc:subject>logistic regression</dc:subject><dc:subject>crop yield loss</dc:subject><dc:description xml:lang="en">Cauliflower disease is a primary cause of reduced cauliflower yield. Preventing cauliflower disease requires early diagnosis. In the scope of this study, we suggested an agro-medical expert system that would make it easier to diagnose cauliflower disease. In this method, a digital image must be taken off the phone or handled device to diagnose cauliflower sickness. A data augmentation technique was initially used to construct a vast data set. The disease-affected parts of the cauliflower were then segmented using k-means clustering. Following that, ten statistical and gray-level co-occurrence matrix (GLCM) features were retrieved from the segmented pictures. After choosing the top n features (N ranged from 5 to 10), the synthetic minority oversampling technique (SMOTE) approach was used to handle training datasets with different amounts of each feature. After that, we utilized five machine learning (ML) algorithms and evaluated their performance using seven performance evaluation matrices for both augmented and non-augmented datasets. The same procedure was performed on both datasets. Then, we use both datasets to test how well the classifier works. Logistic regression (LR) is the most accurate method for the top nine features in the augmented dataset (90.77%).</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2023-10-11</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v12i6.5359</dc:identifier><dc:identifier>10.11591/eei.v12i6.5359</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 12 No 6 (2023); 3541-3551</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/5359/3470</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>