Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design optimization and trajectory planning of a strawberry harvesting manipulator

Bulletin of Electrical Engineering and Informatics · Vol. 13 No. 6 (2024) · hlm. 3948–3959

DOI
10.11591/eei.v13i6.7957
ISSN
2089-3191, 2302-9285
Terbit
2024-09-20
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

This paper presents a systematic approach to optimizing the structural parameters of a 4-degree-of-freedom (DoF) strawberry harvesting manipulator to minimize its workspace. Unlike previous research that primarily concentrated on the spatial needs related to fruit distribution areas, this work addresses the spatial dynamics of different stages of the fruit-picking process. This is achieved by combining the workspace model method, mathematical modeling, and the GlobalSearch algorithm in the optimization process. A comprehensive verification was conducted using the Denavit-Hartenberg method to simulate the workspace of the optimal manipulator structure. This ensured that the manipulator effectively covered the entire harvesting space. The research design involves exploring an optimal trajectory planning method by adopting a modified sine jerk profile that minimizes overall trajectory duration while maintaining good smoothness. The effectiveness of this method is demonstrated through a simulation of the trajectory of the four joints to drive the end effector from the initial position to the position of the strawberry. This approach yields execution times up to 27% shorter than in previous studies. The proposed method is useful for optimizing the physical and trajectory design of the harvesting manipulator that operates in confined and restricted environments to enhance efficiency, adaptability, and safety in harvesting operations.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 31 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Abdelmalek Essaâdi University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Samir El AdibAbdelmalek Essaâdi University4
Ismail NegabiAbdelmalek Essaâdi University2
Smail Ait El AsriAbdelmalek Essaâdi University2
Assaad El MakhloufiAbdelmalek Essaâdi University1
Nisrine ChekrounAbdelmalek Essaâdi University1
Noha TagmoutiAbdelmalek Essaâdi University1
Omar BenarchidAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Design optimization and trajectory planning of a strawberry harvesting manipulator</dc:title><dc:creator>Inas Saoud</dc:creator><dc:creator>Hatim Idriss Jaafari</dc:creator><dc:creator>Asaad Chahboun</dc:creator><dc:creator>Naoufal Raissouni</dc:creator><dc:creator>Nizar Ben Achhab</dc:creator><dc:creator>Abdelilah Azyat</dc:creator><dc:subject>trajectory planning</dc:subject><dc:subject>Denavit-Hartenberg model</dc:subject><dc:subject>agricultural robotics</dc:subject><dc:description xml:lang="en">This paper presents a systematic approach to optimizing the structural parameters of a 4-degree-of-freedom (DoF) strawberry harvesting manipulator to minimize its workspace. Unlike previous research that primarily concentrated on the spatial needs related to fruit distribution areas, this work addresses the spatial dynamics of different stages of the fruit-picking process. This is achieved by combining the workspace model method, mathematical modeling, and the GlobalSearch algorithm in the optimization process. A comprehensive verification was conducted using the Denavit-Hartenberg method to simulate the workspace of the optimal manipulator structure. This ensured that the manipulator effectively covered the entire harvesting space. The research design involves exploring an optimal trajectory planning method by adopting a modified sine jerk profile that minimizes overall trajectory duration while maintaining good smoothness. The effectiveness of this method is demonstrated through a simulation of the trajectory of the four joints to drive the end effector from the initial position to the position of the strawberry. This approach yields execution times up to 27% shorter than in previous studies. The proposed method is useful for optimizing the physical and trajectory design of the harvesting manipulator that operates in confined and restricted environments to enhance efficiency, adaptability, and safety in harvesting operations.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2024-09-20</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v13i6.7957</dc:identifier><dc:identifier>10.11591/eei.v13i6.7957</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 13 No 6 (2024); 3948-3959</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/7957/3947</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>