Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Analysis of texture features for wood defect classification

Bulletin of Electrical Engineering and Informatics · Vol. 9 No. 1 (2020) · hlm. 121–128

DOI
10.11591/eei.v9i1.1553
ISSN
2089-3191, 2302-9285
Terbit
2020-02-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

Selecting important features in classifying wood defects remains a challenging issue to the automated visual inspection domain. This study aims to address the extraction and analysis of features based on statistical texture on images of wood defects. A series of procedures including feature extraction using the Grey Level Dependence Matrix (GLDM) and feature analysis were executed in order to investigate the appropriate displacement and quantisation parameters that could significantly classify wood defects. Samples were taken from the KembangSemangkuk (KSK), Meranti and Merbau wood species. Findings from visual analysis and classification accuracy measures suggest that the feature set with the displacement parameter, d=2, and quantisation level, q=128, shows the highest classification accuracy. However, to achieve less computational cost, the feature set with quantisation level, q=32, shows acceptable performance in terms of classification accuracy.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 82 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Politeknik Muadzam Shah
  • Universiti Tenaga Nasional
  • Universiti Teknologi Petronas
  • State University of Malang
  • International University of Batam
  • Universiti Utara Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Raja Rina Raja IkramUniversiti Teknikal Malaysia Melaka4
Fiza Abdul RahimUniversiti Tenaga Nasional4
Ngo Hea ChoonUniversiti Teknikal Malaysia Melaka4
Ummi Raba’ah HashimAfiliasi tidak diketahui3
Kasturi KanchymalayUniversiti Teknikal Malaysia Melaka3
Mohd Hilmi HasanUniversiti Teknologi Petronas2
Teo Hong ChunUniversiti Teknikal Malaysia Melaka2
Nik Nurdini WolseleyUniversiti Teknikal Malaysia Melaka2
Burhanuddin Mohd AboobaiderUniversiti Teknikal Malaysia Melaka2
Rafizah Ab RahmanPoliteknik Muadzam Shah2
Ummi Namirah HashimUniversiti Teknikal Malaysia Melaka2
Mohd Hariz NaimUniversiti Teknikal Malaysia Melaka2
Aji Prasetya WibawaState University of Malang1
Martina AliUniversiti Teknikal Malaysia Melaka1
Rahillda Nadhirah Norizzaty RahiddinUniversiti Teknikal Malaysia Melaka1
Zuraida Abal AbasUniversiti Teknikal Malaysia Melaka1
Benyamin Langgu SinagaUniversiti Teknikal Malaysia Melaka1
Antasena Wahyu AnggarajatiAfiliasi tidak diketahui1
Nurhamizah ZainudinAfiliasi tidak diketahui1
Intan Ermahani A. JalilUniversiti Teknikal Malaysia Melaka1
Hepy Hefri AriyantoInternational University of Batam1
Mazida Binti AhmadUniversiti Utara Malaysia1
Chiah Chin LimUniversiti Teknikal Malaysia Melaka1
Yuen Chin WongUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Analysis of texture features for wood defect classification</dc:title><dc:creator>Nur Dalila Abdullah</dc:creator><dc:creator>Ummi Rabaah Hashim</dc:creator><dc:creator>Sabrina Ahmad</dc:creator><dc:creator>Lizawati Binti Salahuddin</dc:creator><dc:subject>texture features</dc:subject><dc:subject>statistical texture analysis</dc:subject><dc:subject>feature extraction</dc:subject><dc:subject>atomic displacement parameters</dc:subject><dc:subject>automated visual inspection</dc:subject><dc:subject>meranti wood</dc:subject><dc:description xml:lang="en">Selecting important features in classifying wood defects remains a challenging issue to the automated visual inspection domain. This study aims to address the extraction and analysis of features based on statistical texture on images of wood defects. A series of procedures including feature extraction using the Grey Level Dependence Matrix (GLDM) and feature analysis were executed in order to investigate the appropriate displacement and quantisation parameters that could significantly classify wood defects. Samples were taken from the KembangSemangkuk (KSK), Meranti and Merbau wood species. Findings from visual analysis and classification accuracy measures suggest that the feature set with the displacement parameter, d=2, and quantisation level, q=128, shows the highest classification accuracy. However, to achieve less computational cost, the feature set with quantisation level, q=32, shows acceptable performance in terms of classification accuracy.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2020-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v9i1.1553</dc:identifier><dc:identifier>10.11591/eei.v9i1.1553</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 9 No 1 (2020); 121-128</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/1553/1260</dc:relation></oai_dc:dc>