Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Investigation on the printability of bioink based on alginate-gelatin hydrogel and liquid crystals

Bulletin of Electrical Engineering and Informatics · Vol. 9 No. 4 (2020) · hlm. 1718–1725

DOI
10.11591/eei.v9i4.2392
ISSN
2089-3191, 2302-9285
Terbit
2020-08-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

Bioinks of 3D bioprinting have significant potential application in the field of tissue engineering to support cell attachment and proliferation. In this work, the alginate-gelatin-CELC (AGLC) bioink based on different compositions of alginate-gelatin (AG) hydrogel and cholesteryl ester liquid crystals (CELC) was prepared. Primarily, the alginate-gelatin hydrogel with certain concentration of Gelatin (10-50%w/v) was investigated. The printability of the hydrogel reached a minimum width of 1.8 mm at a flow rate of 1 mL/min when the Gelatin concentration was increased to 50 % w/v (AG1050). Subsequently, the respective polymers with 10% w/v Alginate and50% w/v Gelatin blended with 1%, 5%, 10%, 20%, 40%, and 60% w/v of CELC in the preparation of the alginate-gelatin-CELC bioink was further investigated. The printability of the bioink was examined by micro-extrusion based 3D bioprinter. The printability of the bioink enhanced by 27.8% as compared to AG1050 and reached a minimum width of 1.3 mm at a flow rate of 1 mL/min when the CELC concentration was increased to 40% and 60%. The tested properties of the bioink show that the CELC improve shear-thinning and lipid moieties properties to the composite bioink and hence, enhances its printability.

Kata kunci

Jaringan kolaborasi para penulis

17 penulis · 62 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nafarizal NayanTun Hussein Onn University of Malaysia4
Abdulsalam Ali Ahmed SalmanAfiliasi tidak diketahui2
Mohd Khairul AhmadTun Hussein Onn University of Malaysia2
Rosnah Mohd ZinTun Hussein Onn University of Malaysia2
Nadhia Mohd YusofTun Hussein Onn University of Malaysia2
Elfa Rizan RizonTun Hussein Onn University of Malaysia2
Marlia MorsinTun Hussein Onn University of Malaysia2
Munzilah Md RohaniTun Hussein Onn University of Malaysia2
Siti Hajar Aminah AliTun Hussein Onn University of Malaysia2
See Khee YeTun Hussein Onn University of Malaysia2
Chiok Chuan LimAfiliasi tidak diketahui2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Investigation on the printability of bioink based on alginate-gelatin hydrogel and liquid crystals</dc:title><dc:creator>Alyaa Idrees Abdulmaged</dc:creator><dc:creator>Chin Fhong Soon</dc:creator><dc:creator>Balkis A. Talip</dc:creator><dc:creator>Sheril Amira Othman</dc:creator><dc:creator>Gim Pao Lim</dc:creator><dc:creator>Kian Sek Tee</dc:creator><dc:subject>bioinks</dc:subject><dc:subject>alginate-gelatin hydrogel</dc:subject><dc:subject>3D bioprinting</dc:subject><dc:subject>printability</dc:subject><dc:subject>micro-extrusion</dc:subject><dc:subject>shear thinning</dc:subject><dc:subject>gelatin concentration</dc:subject><dc:subject>alginate concentration</dc:subject><dc:subject>tissue engineering scaffolds</dc:subject><dc:description xml:lang="en">Bioinks of 3D bioprinting have significant potential application in the field of tissue engineering to support cell attachment and proliferation. In this work, the alginate-gelatin-CELC (AGLC) bioink based on different compositions of alginate-gelatin (AG) hydrogel and cholesteryl ester liquid crystals (CELC) was prepared. Primarily, the alginate-gelatin hydrogel with certain concentration of Gelatin (10-50%w/v) was investigated. The printability of the hydrogel reached a minimum width of 1.8 mm at a flow rate of 1 mL/min when the Gelatin concentration was increased to 50 % w/v (AG1050). Subsequently, the respective polymers with 10% w/v Alginate and50% w/v Gelatin blended with 1%, 5%, 10%, 20%, 40%, and 60% w/v of CELC in the preparation of the alginate-gelatin-CELC bioink was further investigated. The printability of the bioink was examined by micro-extrusion based 3D bioprinter. The printability of the bioink enhanced by 27.8% as compared to AG1050 and reached a minimum width of 1.3 mm at a flow rate of 1 mL/min when the CELC concentration was increased to 40% and 60%. The tested properties of the bioink show that the CELC improve shear-thinning and lipid moieties properties to the composite bioink and hence, enhances its printability.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2020-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v9i4.2392</dc:identifier><dc:identifier>10.11591/eei.v9i4.2392</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 9 No 4 (2020); 1718-1725</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/2392/2033</dc:relation></oai_dc:dc>