Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Increasing the required slip range of wound induction generator in wind power systems

Bulletin of Electrical Engineering and Informatics · Vol. 9 No. 2 (2020) · hlm. 436–442

DOI
10.11591/eei.v9i2.1795
ISSN
2089-3191, 2302-9285
Terbit
2020-03-23
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

Eddy currents losses in the rotor in high power generators do not allow operators, under high values of slip, to regulate voltage and control of reactive power flow. The paper presents a method that can accurately estimate the eddy current losses in electric machines with a less complicated procedure. The suggested method allows researchers to analyze and reduce the losses, and consequently, to improve the wind turbine induction generators efficiencies. The given approach, based on the conventional electric machine theory and the parameters supplied by the manufacturers, predicts the eddy current losses theoretically without the need of the measured material loss data or BH curve. Increasing the range of slip variation of induction motor can be achieved by using a rotor of two layers in the radial direction with different parameters. The first layer is a laminated layer of height (h), and the second is a solid (the rotor yoke). The computation of eddy current losses is useful to change the design of the machine to minimize the losses. This paper presents a detailed modeling of the effect parameters on the eddy current losses in wind turbine induction generator.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 133 tautan kepenulisan bersama · 39 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Al-Balqa Applied University
  • Najran University
  • Irkutsk National Research Technical University
  • Palestine Technical University - Kadoorie
  • Tafila Technical University
  • A'Sharqiyah University
  • University of Business and Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khalaf Y. AlzyoudAfiliasi tidak diketahui5
Ashraf SamarahAl-Balqa Applied University5
Abdallah R. Al-ZyoudAl-Balqa Applied University4
Omar AlbarbarawiAl-Balqa Applied University3
Jawdat S. AlkasassbehAl-Balqa Applied University2
Abdallah Ershoud AlzyoudAfiliasi tidak diketahui2
Ghazi QaryoutiAfiliasi tidak diketahui1
Anwar AlmoflehAfiliasi tidak diketahui1
Abdallah R AlzyoudAfiliasi tidak diketahui1
Hindi AymanNajran University1
Afaq HiaryAl-Balqa Applied University1
Ameera AmayiraAl-Balqa Applied University1
Hiba AsheeshAl-Balqa Applied University1
Adam R. H. AlhawariNajran University1
Abdulkarem H. M. AlmawganiNajran University1
Hisham AlghamidiNajran University1
Azzan AlyamiNajran University1
Abdulrahman AlyamiNajran University1
Yahya AldaweisNajran University1
Mahdi AlgannasNajran University1
Abdultawab M. QahtanNajran University1
Hussein Ahmad Al-OfeishatAl-Balqa Applied University1
Farouq M. Al-TaweelAl-Balqa Applied University1
Hisham AlrawashdehTafila Technical University1
Vlademer Е. PavlovIrkutsk National Research Technical University1
Wael A. SalahPalestine Technical University - Kadoorie1
Basem Abu ZneidUniversity of Business and Technology1
Basim A. AlsayidPalestine Technical University - Kadoorie1
Anees Abu SneinehPalestine Technical University - Kadoorie1
Mahmoud A. M. AlbreemA'Sharqiyah University1
Mutasem Sh. AlkhasawnehAjloun National University1
Amir Abu Al-AishAl-Hussein Bin Talal University1
Vlademer E. PavlovAfiliasi tidak diketahui1
Mikhail Pavlovich DunayevIrkutsk National Research Technical University1
Sarfaroz DovudovIrkutsk National Research Technical University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Increasing the required slip range of wound induction generator in wind power systems</dc:title><dc:creator>Ali Dalabeeh</dc:creator><dc:creator>Anwar Al–Mofleh</dc:creator><dc:creator>Tariq M. Younes</dc:creator><dc:creator>Ayman Y. Al-Rawashdeh</dc:creator><dc:creator>Ayman Taher Hindi</dc:creator><dc:subject>eddy current loss</dc:subject><dc:subject>wind turbine generator</dc:subject><dc:subject>rotor design</dc:subject><dc:subject>laminated rotor</dc:subject><dc:subject>loss estimation</dc:subject><dc:subject>reactive power control</dc:subject><dc:subject>generator efficiency</dc:subject><dc:description xml:lang="en">Eddy currents losses in the rotor in high power generators do not allow operators, under high values of slip, to regulate voltage and control of reactive power flow. The paper presents a method that can accurately estimate the eddy current losses in electric machines with a less complicated procedure. The suggested method allows researchers to analyze and reduce the losses, and consequently, to improve the wind turbine induction generators efficiencies. The given approach, based on the conventional electric machine theory and the parameters supplied by the manufacturers, predicts the eddy current losses theoretically without the need of the measured material loss data or BH curve. Increasing the range of slip variation of induction motor can be achieved by using a rotor of two layers in the radial direction with different parameters. The first layer is a laminated layer of height (h), and the second is a solid (the rotor yoke). The computation of eddy current losses is useful to change the design of the machine to minimize the losses. This paper presents a detailed modeling of the effect parameters on the eddy current losses in wind turbine induction generator.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2020-03-23</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v9i2.1795</dc:identifier><dc:identifier>10.11591/eei.v9i2.1795</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 9 No 2 (2020); 436-442</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/1795/1329</dc:relation></oai_dc:dc>