Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Adaptive position control of DC motor for brush-based Adaptive position control of DC motor for brush-based

Bulletin of Electrical Engineering and Informatics · Vol. 12 No. 3 (2023) · hlm. 1293–1301

DOI
10.11591/eei.v12i3.4926
ISSN
2089-3191, 2302-9285
Terbit
2023-01-17
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

In this paper, we have developed an automatic brush-based PV cleaning system to control and synchronize the 3 motors together with a smooth periodic of cleaning while moving it horizontally over the PV surface. The mechanical design involved installing linear guides at the top and bottom of the rail to support the aluminium plate that holds the carrier motors and rotating brush. Two different movements of translational and rotational motion of the motors are managed by an algorithm programmed in Arduino Mega. In investigating the performance of motor parameters and dust removal rate, we conducted an experiment by spreading dry sand over the PV surface. Results showed that the torque of the cleaning brush motor increases with the increase in load. The obtained torque of the carrier motor was found to be 9.167 Nm ( stall torque, 9.8 Nm) with a full load of 18 brushes. The torque is inversely proportional to the speed but directly proportional to power. The required power to move the 2.93 kg of cleaning system was 19.20 W with 3.015 Nm of torque. The system achieved 86.8% of the dust removal rate from the four cycles of cleaning operations.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 60 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti Putra Malaysia
  • Hitachi (Japan)
  • Mehran University of Engineering & Technology Shaheed Zulfiqar Ali Bhutto Campus, Khairpur Mir's
  • Al-Mustaqbal University
  • Al-Furat Al-Awsat Technical University
  • Imam Ja’afar Al-Sadiq University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mohd Noor AbdullahTun Hussein Onn University of Malaysia3
Nur Hanis Mohammad RadziTun Hussein Onn University of Malaysia3
Mazhar Hussain BalochMehran University of Engineering & Technology Shaheed Zulfiqar Ali Bhutto Campus, Khairpur Mir's3
Feryal Ibrahim JabbarAl-Mustaqbal University2
Adnan Hasan TawafanAl-Furat Al-Awsat Technical University1
Nur AyuniUniversiti Putra Malaysia1
Norman MariunUniversiti Putra Malaysia1
Mohammad Lutfi OthmanUniversiti Putra Malaysia1
Hashim HizamUniversiti Putra Malaysia1
Soo Chin ChongTun Hussein Onn University of Malaysia1
Zubair Ahmed MemonTun Hussein Onn University of Malaysia1
F. AbbasiTun Hussein Onn University of Malaysia1
Hassan Falah FakhruldeenImam Ja’afar Al-Sadiq University1
Asif Ahmed RahmoonAfiliasi tidak diketahui1
Khalid G. MohammedUniversity of Diyala1
Reyasudin Basir KhanUniversity of Kuala Lumpur1
Sager K. AlswedTun Hussein Onn University of Malaysia1
Ismail Ahmat MahadiTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Adaptive position control of DC motor for brush-based Adaptive position control of DC motor for brush-based</dc:title><dc:creator>Ummi Sorfina</dc:creator><dc:creator>Syed Zahurul Islam</dc:creator><dc:creator>Kok Boon Ching</dc:creator><dc:creator>Dur Muhammad Soomro</dc:creator><dc:creator>Jabbar Al-Fattah Yahaya</dc:creator><dc:subject>DC motor</dc:subject><dc:subject>motor synchronization</dc:subject><dc:subject>linear guides</dc:subject><dc:subject>solar panel cleaning robot</dc:subject><dc:description xml:lang="en">In this paper, we have developed an automatic brush-based PV cleaning system to control and synchronize the 3 motors together with a smooth periodic of cleaning while moving it horizontally over the PV surface. The mechanical design involved installing linear guides at the top and bottom of the rail to support the aluminium plate that holds the carrier motors and rotating brush. Two different movements of translational and rotational motion of the motors are managed by an algorithm programmed in Arduino Mega. In investigating the performance of motor parameters and dust removal rate, we conducted an experiment by spreading dry sand over the PV surface. Results showed that the torque of the cleaning brush motor increases with the increase in load. The obtained torque of the carrier motor was found to be 9.167 Nm ( stall torque, 9.8 Nm) with a full load of 18 brushes. The torque is inversely proportional to the speed but directly proportional to power. The required power to move the 2.93 kg of cleaning system was 19.20 W with 3.015 Nm of torque. The system achieved 86.8% of the dust removal rate from the four cycles of cleaning operations.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2023-01-17</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v12i3.4926</dc:identifier><dc:identifier>10.11591/eei.v12i3.4926</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 12 No 3 (2023); 1293-1301</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/4926/3197</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>