Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Investigation on the ohmic characteristic of Ni/Ti/4H-SiC

Bulletin of Electrical Engineering and Informatics · Vol. 10 No. 5 (2021) · hlm. 2496–2502

DOI
10.11591/eei.v10i5.3174
ISSN
2089-3191, 2302-9285
Terbit
2021-10-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

Ohmic contact is important for silicon carbide (SiC) devices such as Schottky diode, junction field effect transistor (JFET) and metal oxide transistor (MOSFET). The effect of post metallization annealing (PMA) on the ohmic characteristics of Ni/Ti/4H-SiC is investigated. The samples were annealed under different ambients of high vacuum, forming gas and N2 gas at 1050˚C for 3 minutes using rapid thermal process (RTP). Current-voltage (I-V) measurements taken for different distances of a transmission line model (TLM) structure have been utilized to extract the contact resistivity. The correlation between surface roughness and resistivity has been investigated. It was found that the involvement of nitrogen during the annealing process at 1050˚C was ineffective to reduce the contact resistivity. The resistivity is improved when the samples were annealed in forming gas (FG), (a mixture of H2+N2) environment, showing that the incorporation of H2 gas during the annealing process has produced a better result. On the other hand, high vacuum PMA was found to be effective to improve the ohmic characteristic with higher current level at lower voltage. Hence, the enhanced performance observed in high vacuum annealing samples is beneficial to get ohmic contact on Ni/Ti/4H-SiC for PMA process with a low thermal budget.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 128 tautan kepenulisan bersama · 29 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universiti Sains Malaysia
  • Universiti Teknologi Petronas
  • Newcastle University
  • Universiti Teknologi MARA
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nur Hazahsha ShamsudinUniversiti Teknikal Malaysia Melaka3
Wira Hidayat Mohd SaadUniversiti Teknikal Malaysia Melaka3
Iskandar Dzukarnain RummajaAfiliasi tidak diketahui3
Radi Husin RamleeUniversiti Teknikal Malaysia Melaka3
Nur Afiqah Hani SeninUniversiti Teknikal Malaysia Melaka3
Luke J. BradleyNewcastle University3
Mohd Safirin KarisUniversiti Teknikal Malaysia Melaka2
Hyreil Anuar KasdirinUniversiti Teknikal Malaysia Melaka2
Anis Suhaila Mohd ZainUniversiti Teknikal Malaysia Melaka2
Fauziyah SalehuddinUniversiti Teknikal Malaysia Melaka2
Khairil Ezwan KaharudinUniversiti Teknikal Malaysia Melaka2
Ameer Farhan RoslanUniversiti Teknikal Malaysia Melaka2
Norman Koliah Anak NohengUniversiti Teknikal Malaysia Melaka1
Nur Asmiza SelamatUniversiti Teknikal Malaysia Melaka1
Hrithik TawaiUniversiti Teknikal Malaysia Melaka1
Nurliyana Abdul RaofUniversiti Teknologi Petronas1
Md Pauzi AbdullahUniversity of Technology Malaysia1
Noor Asyikin SulaimanUniversiti Teknikal Malaysia Melaka1
Hayati AbdullahUniversity of Technology Malaysia1
Azdiana Md YusopUniversiti Teknikal Malaysia Melaka1
Syafeeza Ahmad RadziUniversiti Teknikal Malaysia Melaka1
Khairul Muzzammil SaipullahUniversiti Teknikal Malaysia Melaka1
Sook Hui ChongUniversiti Teknikal Malaysia Melaka1
Nursabilillah Mohd AliAfiliasi tidak diketahui1
Mohd Shahrieel Mohd ArasUniversiti Teknikal Malaysia Melaka1
Norafizah Binti AbasUniversiti Teknikal Malaysia Melaka1
Norafizah AbasUniversiti Teknikal Malaysia Melaka1
Nursabilillah Mohd AliUniversiti Teknikal Malaysia Melaka1
Zarina RazlanUniversiti Teknologi MARA1
Siti Asma Che AzizUniversiti Teknikal Malaysia Melaka1
Aina Hayani AmranUniversiti Teknikal Malaysia Melaka1
N. Mohamed HarisAfiliasi tidak diketahui1
Yan Chiew WongUniversiti Teknikal Malaysia Melaka1
Mohammed Abdul Raheem Esmail AlselwiUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Investigation on the ohmic characteristic of Ni/Ti/4H-SiC</dc:title><dc:creator>Muhammad Idzdihar Idris</dc:creator><dc:creator>Z. A. F. M. Napiah</dc:creator><dc:creator>Marzaini Rashid</dc:creator><dc:creator>Muhammad Noorazlan Shah Zainudin</dc:creator><dc:creator>Siti Amaniah Mohd Chachuli</dc:creator><dc:creator>Mohd Asyadi Azam</dc:creator><dc:subject>ohmic contacts</dc:subject><dc:subject>4H-SiC</dc:subject><dc:subject>post-metallization annealing</dc:subject><dc:subject>contact resistivity</dc:subject><dc:subject>transmission line model</dc:subject><dc:subject>surface roughness</dc:subject><dc:subject>forming gas annealing</dc:subject><dc:subject>hydrogen incorporation</dc:subject><dc:subject>high vacuum annealing</dc:subject><dc:subject>low thermal budget</dc:subject><dc:subject>silicon carbide power devices</dc:subject><dc:description xml:lang="en">Ohmic contact is important for silicon carbide (SiC) devices such as Schottky diode, junction field effect transistor (JFET) and metal oxide transistor (MOSFET). The effect of post metallization annealing (PMA) on the ohmic characteristics of Ni/Ti/4H-SiC is investigated. The samples were annealed under different ambients of high vacuum, forming gas and N2 gas at 1050˚C for 3 minutes using rapid thermal process (RTP). Current-voltage (I-V) measurements taken for different distances of a transmission line model (TLM) structure have been utilized to extract the contact resistivity. The correlation between surface roughness and resistivity has been investigated. It was found that the involvement of nitrogen during the annealing process at 1050˚C was ineffective to reduce the contact resistivity. The resistivity is improved when the samples were annealed in forming gas (FG), (a mixture of H2+N2) environment, showing that the incorporation of H2 gas during the annealing process has produced a better result. On the other hand, high vacuum PMA was found to be effective to improve the ohmic characteristic with higher current level at lower voltage. Hence, the enhanced performance observed in high vacuum annealing samples is beneficial to get ohmic contact on Ni/Ti/4H-SiC for PMA process with a low thermal budget.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2021-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v10i5.3174</dc:identifier><dc:identifier>10.11591/eei.v10i5.3174</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 10 No 5 (2021); 2496-2502</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/3174/2318</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>