Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Multiple-node model of wind turbine generating system for unbalanced distribution system load flow analysis

Bulletin of Electrical Engineering and Informatics · Vol. 13 No. 2 (2024) · hlm. 693–701

DOI
10.11591/eei.v13i2.5461
ISSN
2089-3191, 2302-9285
Terbit
2024-02-23
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

This paper discusses a method to integrate a wind turbine generating system (WTGS) into a three-phase unbalanced distribution system load flow (DSLF) analysis. The proposed method is based on the single-phase multiple-node model. In the present work, the single-phase multiple-node model is extended to a three-phase multiple-node model to facilitate the load flow analysis of a three-phase unbalanced power system network. The multiple-node model (i.e., three-node model) will only modify the load flow analysis by introducing two lines and two load buses to the distribution system network where the WTGS is installed. Thus, a standard three-phase load flow program can be employed to compute the unknown quantities in the DSLF problem formulation. The proposed method is verified by incorporating the model into the load flow analysis of three-phase distribution networks. The investigation uses two representative distribution networks (i.e., 19-bus and 25-bus networks). The results of the study confirm the validity of the proposed method.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 28 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tanjungpura University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ayong HiendroTanjungpura University5
Ismail YusufTanjungpura University4
Fitriah HusinAfiliasi tidak diketahui2
Purwoharjono PurwoharjonoTanjungpura University2
F. Trias Pontia WigyariantoTanjungpura University2
Junaidi JunaidiTanjungpura University2
M. Iqbal ArsyadTanjungpura University1
Managam RajagukgukTanjungpura University1
Syaifurrahman SyaifurrahmanTanjungpura University1
Fitriah FitriahTanjungpura University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Multiple-node model of wind turbine generating system for unbalanced distribution system load flow analysis</dc:title><dc:creator>Rudy Gianto</dc:creator><dc:creator>Kho Hie Khwee</dc:creator><dc:subject>three-phase unbalanced distribution systems</dc:subject><dc:subject>wind power integration</dc:subject><dc:subject>distribution networks</dc:subject><dc:description xml:lang="en">This paper discusses a method to integrate a wind turbine generating system (WTGS) into a three-phase unbalanced distribution system load flow (DSLF) analysis. The proposed method is based on the single-phase multiple-node model. In the present work, the single-phase multiple-node model is extended to a three-phase multiple-node model to facilitate the load flow analysis of a three-phase unbalanced power system network. The multiple-node model (i.e., three-node model) will only modify the load flow analysis by introducing two lines and two load buses to the distribution system network where the WTGS is installed. Thus, a standard three-phase load flow program can be employed to compute the unknown quantities in the DSLF problem formulation. The proposed method is verified by incorporating the model into the load flow analysis of three-phase distribution networks. The investigation uses two representative distribution networks (i.e., 19-bus and 25-bus networks). The results of the study confirm the validity of the proposed method.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2024-02-23</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v13i2.5461</dc:identifier><dc:identifier>10.11591/eei.v13i2.5461</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 13 No 2 (2024); 693-701</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/5461/3594</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>