Akses terbuka
Jurnal
SINTA 1
On detecting and identifying faulty internet of things devices and outages
Bulletin of Electrical Engineering and Informatics · Vol. 10 No. 6 (2021) · hlm. 3127–3136
ISSN 2089-3191, 2302-9285
Terbit 2021-12-01
Penerbit Institute of Advanced Engineering and Science (IAES)
Bahasa en
Abstrak
As internet of things (IoT) devices play an integral role in our everyday life, it is critical to monitor the health of the IoT devices. However, fault detection in IoT is much more challenging compared with that in traditional wired networks. Traditional observing and polling are not appropriate for detecting faults in resource-constrained IoT devices. Because of the dynamic feature of IoT devices, these detection methods are inadequate for IoT fault detection. In this paper, we propose two methods that can monitor the health status of IoT devices through monitoring the network traffic of these devices. Based on the collected traffic or flow entropy, these methods can determine the health status of IoT devices by comparing captured traffic behavior with normal traffic patterns. Our measurements show that the two methods can effectively detect and identify malfunctioned or defective IoT devices.
Jaringan kolaborasi para penulis
5 penulis ·
6 tautan kepenulisan bersama
· 2 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Liberty University Illinois State University Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">On detecting and identifying faulty internet of things devices and outages</dc:title><dc:creator>Feng Wang</dc:creator><dc:creator>Eduard Babulak</dc:creator><dc:creator>Yongning Tang</dc:creator><dc:subject>Internet of Things</dc:subject><dc:subject>fault detection</dc:subject><dc:subject>network traffic analysis</dc:subject><dc:subject>resource-constrained devices</dc:subject><dc:subject>network outages</dc:subject><dc:description xml:lang="en">As internet of things (IoT) devices play an integral role in our everyday life, it is critical to monitor the health of the IoT devices. However, fault detection in IoT is much more challenging compared with that in traditional wired networks. Traditional observing and polling are not appropriate for detecting faults in resource-constrained IoT devices. Because of the dynamic feature of IoT devices, these detection methods are inadequate for IoT fault detection. In this paper, we propose two methods that can monitor the health status of IoT devices through monitoring the network traffic of these devices. Based on the collected traffic or flow entropy, these methods can determine the health status of IoT devices by comparing captured traffic behavior with normal traffic patterns. Our measurements show that the two methods can effectively detect and identify malfunctioned or defective IoT devices.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2021-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v10i6.2698</dc:identifier><dc:identifier>10.11591/eei.v10i6.2698</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 10 No 6 (2021); 3127-3136</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/2698/2414</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat ID karya OpenAlex (record dari sumber OpenAlex)
3 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 19 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Wang, F., Babulak, E., & Tang, Y. (2021). On detecting and identifying faulty internet of things devices and outages. Bulletin of Electrical Engineering and Informatics, 10(6), 3127–3136. https://doi.org/10.11591/eei.v10i6.2698
Salin
IEEE
F. Wang, E. Babulak, and Y. Tang, “On detecting and identifying faulty internet of things devices and outages,” Bulletin of Electrical Engineering and Informatics, vol. 10, no. 6, pp. 3127–3136, 2021, doi: 10.11591/eei.v10i6.2698.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.