Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Evaluating solar photovoltaic panel orientations for an open-field internet of things framework

Bulletin of Electrical Engineering and Informatics · Vol. 15 No. 1 (2026) · hlm. 56–70

DOI
10.11591/eei.v15i1.10597
ISSN
2089-3191, 2302-9285
Terbit
2026-02-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

This paper presents a comparative experimental analysis of horizontal, vertical, and 45° tilt photovoltaic (PV) panel orientations, evaluated with and without load conditions in a tropical environment. Simultaneous measurements of open-circuit voltage (Voc), short-circuit current (Isc), and average power were conducted over three consecutive days to facilitate orientation-specific performance comparisons. Results show that the horizontal orientation demonstrated robust midday performance, achieving 3.65 W with load on one of the test day, but declined sharply in post-noon periods. The vertical orientation consistently produced lower average power outputs, approximately 3.1 W with load. As a reference, the 45° tilt consistently produced the highest output, with average load powers of 3.77 W, 3.41 W, and 3.64 W over the three days. This performance exceeded horizontal orientations by 2–5% and vertical orientations by 15–20%. Both horizontal and tilt orientations consistently surpassed internet of things (IoT) operational thresholds of 3.3–5.0 V and 100–200 mA required for low power sensor nodes, ensuring excess energy for storage. In contrast, the vertical orientation posed a risk of inadequate current in late afternoon periods. Thus, the results indicate that the orientation selection should be environment-driven. Horizontal or tilted orientations are suitable for rural and open-field IoT settings, while vertical orientations are advantageous for space-constrained or dust-prone environments.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 80 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti of Malaysia Sabah
  • University of Malaya
  • University of Technology Malaysia
  • Lembaga Pelabuhan Klang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Suriana Binti SaliminTun Hussein Onn University of Malaysia3
Siti Amely JumaatTun Hussein Onn University of Malaysia2
Mohd Noor AbdullahTun Hussein Onn University of Malaysia2
Mohd Noor AbdullahTun Hussein Onn University of Malaysia1
Nur Amirah Abdul JamilTun Hussein Onn University of Malaysia1
Nur Hanis Mohammad RadziTun Hussein Onn University of Malaysia1
Ong Wei LiangTun Hussein Onn University of Malaysia1
Muhammad Nafis IsmailTun Hussein Onn University of Malaysia1
Najhan Md SaidAfiliasi tidak diketahui1
Astina TugiTun Hussein Onn University of Malaysia1
Ami Hassan Md DinUniversity of Technology Malaysia1
Badrul Hisham IsmailLembaga Pelabuhan Klang1
Megat Muhammad Ikhsan Megat HasnanUniversiti of Malaysia Sabah1
Nafarizal NayanTun Hussein Onn University of Malaysia1
Fatin Nor AhmadTun Hussein Onn University of Malaysia1
Yusmar Palapa WijayaTun Hussein Onn University of Malaysia1
Afishah AliasTun Hussein Onn University of Malaysia1
Bablu Kumar GhoshUniversiti of Malaysia Sabah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Evaluating solar photovoltaic panel orientations for an open-field internet of things framework</dc:title><dc:creator>Khairul Anuar Mohamad</dc:creator><dc:creator>Mohamad Syahmi Nordin</dc:creator><dc:creator>Hairul Hafizi Hasnan</dc:creator><dc:creator>Ahmad Fateh Mohamad Nor</dc:creator><dc:creator>Rohaiza Hamdan</dc:creator><dc:creator>Nazirah Mohamad Abdullah</dc:creator><dc:creator>Nor Anija Jalaludin</dc:creator><dc:subject>solar panel orientation</dc:subject><dc:subject>solar panel tilt angle</dc:subject><dc:subject>Internet of Things power supply</dc:subject><dc:subject>low-power sensor nodes</dc:subject><dc:subject>tropical conditions</dc:subject><dc:subject>open-circuit voltage</dc:subject><dc:subject>short-circuit current</dc:subject><dc:subject>solar power output</dc:subject><dc:description xml:lang="en">This paper presents a comparative experimental analysis of horizontal, vertical, and 45° tilt photovoltaic (PV) panel orientations, evaluated with and without load conditions in a tropical environment. Simultaneous measurements of open-circuit voltage (Voc), short-circuit current (Isc), and average power were conducted over three consecutive days to facilitate orientation-specific performance comparisons. Results show that the horizontal orientation demonstrated robust midday performance, achieving 3.65 W with load on one of the test day, but declined sharply in post-noon periods. The vertical orientation consistently produced lower average power outputs, approximately 3.1 W with load. As a reference, the 45° tilt consistently produced the highest output, with average load powers of 3.77 W, 3.41 W, and 3.64 W over the three days. This performance exceeded horizontal orientations by 2–5% and vertical orientations by 15–20%. Both horizontal and tilt orientations consistently surpassed internet of things (IoT) operational thresholds of 3.3–5.0 V and 100–200 mA required for low power sensor nodes, ensuring excess energy for storage. In contrast, the vertical orientation posed a risk of inadequate current in late afternoon periods. Thus, the results indicate that the orientation selection should be environment-driven. Horizontal or tilted orientations are suitable for rural and open-field IoT settings, while vertical orientations are advantageous for space-constrained or dust-prone environments.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2026-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v15i1.10597</dc:identifier><dc:identifier>10.11591/eei.v15i1.10597</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 15 No 1 (2026); 56-70</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/10597/4600</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>