Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Temperature monitoring using polymer optical fiber with integration to the internet of things

Bulletin of Electrical Engineering and Informatics · Vol. 10 No. 1 (2020) · hlm. 357–364

DOI
10.11591/eei.v10i1.2673
ISSN
2089-3191, 2302-9285
Terbit
2020-10-11
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

In this paper, a polymer optical fiber (POF) is applied for temperature measuring of water solution using a light source of 650nm. The aim is to analyse the impact of temperature variations on the output of POF sensor device in terms of output power and sensitivity. From the study, the POF sensor shows a linear trend when the temperature is increased from 30°C to 80°C with the sensitivity of the polymer optical fiber for output power to the temperature are 0.00973 dBm/°C or 0.14797 nW/°C, for optical characterization and 0.0011 V/°C for electrical characterization. The integration of the Internet of Things to the system helps the user to monitor the temperature of various spaces anywhere at any time. The sensed values are controlled by Arduino Uno R3 and then sent to Blynk to provide wireless monitoring by the user.

Kata kunci

Jaringan kolaborasi para penulis

24 penulis · 86 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Universiti Tenaga Nasional
  • Universiti Sains Islam Malaysia
  • Tun Hussein Onn University of Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khairil Ezwan KaharudinUniversiti Teknikal Malaysia Melaka8
Siti Khadijah Idris OthmanUniversiti Teknikal Malaysia Melaka8
Ameer Farhan RoslanUniversiti Teknikal Malaysia Melaka6
Z. A. F. M. NapiahUniversiti Teknikal Malaysia Melaka4
Wan Maisarah MukhtarUniversiti Sains Islam Malaysia4
Faiz ArithUniversiti Teknikal Malaysia Melaka3
Ahmed Musa DinarUniversiti Teknikal Malaysia Melaka2
Nabilah Ahmad JalaludinUniversiti Teknikal Malaysia Melaka2
Siti Aisah Mat JunosUniversiti Teknikal Malaysia Melaka2
Ibrahim AhmadUniversiti Tenaga Nasional2
Maisara Binti OthmanTun Hussein Onn University of Malaysia2
Siti Halma JohariUniversiti Teknikal Malaysia Melaka2
Thanigai AnbalaganUniversiti Teknikal Malaysia Melaka2
Hazli Rafis Abdul RahimUniversiti Teknikal Malaysia Melaka2
Ahmad Nizamuddin Muhammad MustafaUniversiti Teknikal Malaysia Melaka1
Yaumee Natasha JusohUniversiti Teknikal Malaysia Melaka1
Omsri Vinasha AliyaselvamUniversiti Teknikal Malaysia Melaka1
N. ZainalUniversiti Teknikal Malaysia Melaka1
Ahmad Syahiman Mohd ShahUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Temperature monitoring using polymer optical fiber with integration to the internet of things</dc:title><dc:creator>Hazura Haroon</dc:creator><dc:creator>Siti Khadijah Idris</dc:creator><dc:creator>Anis Suhaila Mohd Zain</dc:creator><dc:creator>Hanim Abdul Razak</dc:creator><dc:creator>Fauziyah Salehuddin</dc:creator><dc:subject>plastic optical fiber</dc:subject><dc:subject>temperature sensing</dc:subject><dc:subject>fiber optic sensors</dc:subject><dc:subject>water temperature measurement</dc:subject><dc:subject>Internet of Things</dc:subject><dc:subject>wireless temperature monitoring</dc:subject><dc:subject>Arduino Uno</dc:subject><dc:subject>Blynk</dc:subject><dc:description xml:lang="en">In this paper, a polymer optical fiber (POF) is applied for temperature measuring of water solution using a light source of 650nm. The aim is to analyse the impact of temperature variations on the output of POF sensor device in terms of output power and sensitivity. From the study, the POF sensor shows a linear trend when the temperature is increased from 30°C to 80°C with the sensitivity of the polymer optical fiber for output power to the temperature are 0.00973 dBm/°C or 0.14797 nW/°C, for optical characterization and 0.0011 V/°C for electrical characterization. The integration of the Internet of Things to the system helps the user to monitor the temperature of various spaces anywhere at any time. The sensed values are controlled by Arduino Uno R3 and then sent to Blynk to provide wireless monitoring by the user.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2020-10-11</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v10i1.2673</dc:identifier><dc:identifier>10.11591/eei.v10i1.2673</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 10 No 1 (2020); 357-364</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/2673/1903</dc:relation></oai_dc:dc>