Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Content Comparative Investigation on Tool Wear During End Milling of AISI H13 Steel with Different Tool Path Strategies

Bulletin of Electrical Engineering and Informatics · Vol. 6 No. 4 (2017) · hlm. 327–333

DOI
10.11591/eei.v6i4.852
ISSN
2089-3191, 2302-9285
Terbit
2017-12-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 33 tautan kepenulisan bersama · 26 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • International Islamic University Malaysia
  • Mercu Buana University
  • Universitas Muhammadiyah Tangerang
  • Lampung University
  • Universitas Muhammadiyah Prof Dr Hamka
  • Universiti Teknologi Brunei
  • University of Indonesia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Delvis AgusmanUniversitas Muhammadiyah Prof Dr Hamka2
Galang P. N. HakimMercu Buana University1
Diah SeptiyanaUniversitas Muhammadiyah Tangerang1
Mohamed Abd. RahmanInternational Islamic University Malaysia1
Tasnim Firdaus AriffInternational Islamic University Malaysia1
Desy RosarinaUniversitas Muhammadiyah Tangerang1
Nor Aiman SukindarUniversiti Teknologi Brunei1
Dadang GunawanUniversity of Indonesia1
Setiyo BudiyantoMercu Buana University1
Lukman Medriavin SilalahiMercu Buana University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Content Comparative Investigation on Tool Wear During End Milling of AISI H13 Steel with Different Tool Path Strategies</dc:title><dc:creator>Erry Yulian Triblas Adesta</dc:creator><dc:creator>Muhammad Riza</dc:creator><dc:creator>Avicenna Avicenna</dc:creator><dc:subject>tool wear</dc:subject><dc:subject>end milling</dc:subject><dc:subject>H13 steel</dc:subject><dc:subject>tool path strategy</dc:subject><dc:subject>pocket milling</dc:subject><dc:subject>cutting speed</dc:subject><dc:subject>feed rate</dc:subject><dc:subject>depth of cut</dc:subject><dc:subject>CNC machining</dc:subject><dc:description xml:lang="en">Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2017-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v6i4.852</dc:identifier><dc:identifier>10.11591/eei.v6i4.852</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 6 No 4 (2017); 327-333</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>http://beei.org/index.php/EEI/article/download/852/976</dc:relation></oai_dc:dc>