Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Low insertion loss of surface mount device low pass filter at 700 MHz

Bulletin of Electrical Engineering and Informatics · Vol. 8 No. 2 (2019) · hlm. 382–388

DOI
10.11591/eei.v8i2.1386
ISSN
2089-3191, 2302-9285
Terbit
2019-06-01
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en

Abstrak

The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 57 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Perlis
  • Multimedia University
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Jazan University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ping Jack SohUniversiti Malaysia Perlis5
Ojo RasheedUniversiti Malaysia Perlis3
Azremi Abdullah Al‐HadiUniversiti Malaysia Perlis2
Norfatihah BahariUniversiti Malaysia Perlis2
Sanna TakingUniversiti Malaysia Perlis1
Nor Farhani ZakariaUniversiti Malaysia Perlis1
Shahrir Rizal KasjooUniversiti Malaysia Perlis1
Zarimawaty ZailanUniversiti Malaysia Perlis1
M. K. Md ArshadUniversiti Malaysia Perlis1
Hidayath MirzaUniversiti Malaysia Perlis1
Toufiq Md HossainUniversiti Malaysia Perlis1
Rais Ahmad SheikhJazan University1
Wai Loon CheorUniversiti Malaysia Perlis1
Zubaida Binti YusoffMultimedia University1
Noorlindawaty Md JizatMultimedia University1
Nazihah AhmadMultimedia University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Low insertion loss of surface mount device low pass filter at 700 MHz</dc:title><dc:creator>Khairil Anuar Khairi</dc:creator><dc:creator>Mohd Faizal Jamlos</dc:creator><dc:creator>Surentiran Padmanathan</dc:creator><dc:creator>Mohd Aminudin Jamlos</dc:creator><dc:creator>Muammar Mohamad Isa</dc:creator><dc:subject>low-pass filter</dc:subject><dc:subject>surface mount devices</dc:subject><dc:subject>elliptic filter</dc:subject><dc:subject>insertion loss</dc:subject><dc:subject>multilayer printed circuit boards</dc:subject><dc:subject>ADS simulation</dc:subject><dc:subject>700 MHz</dc:subject><dc:subject>filter design</dc:subject><dc:description xml:lang="en">The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2019-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v8i2.1386</dc:identifier><dc:identifier>10.11591/eei.v8i2.1386</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 8 No 2 (2019); 382-388</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/1386/1043</dc:relation></oai_dc:dc>