Akses terbuka
Jurnal
SINTA 1
Performance analysis of inductive power transfer using JMAG-designer
Bulletin of Electrical Engineering and Informatics · Vol. 12 No. 1 (2022) · hlm. 33–41
ISSN 2089-3191, 2302-9285
Terbit 2022-11-07
Penerbit Institute of Advanced Engineering and Science (IAES)
Bahasa en
Abstrak
Due to its advantage of sending electrical power from the transmitter source to the receiver load with no physical contact, wireless power transfer (WPT) has rapidly gained popularity in recent years. They can be used in a variety of applications, including induction cooking, mobile phone charging, radio frequency identification (RFID), and electric vehicles (EVs). Using JMAG-designer, a simulation of series-parallel inductive power transmission has been investigated in this research. This study aims to determine how the output power and efficiency change depending on how many coils turn in the transmitter and receiver. The number of coils turn in the transmitter is fixed which is 20 turns, the number of coils turn in the receiver is variable and ranges between 15 and 30, and the air gap or distance between the coupling coils is set at 10 cm. The selected frequency to be used in this simulation is between 10 and 50 kHz. According to the absorption result, the output power and efficiency rise when the receiver has more coil turns than the transmitter, and the output power and current rise along with an increase in resonance frequency.
Jaringan kolaborasi para penulis
8 penulis ·
14 tautan kepenulisan bersama
· 7 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Tun Hussein Onn University of Malaysia University of Diyala University of Kuala Lumpur Hitachi (Japan)
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Performance analysis of inductive power transfer using JMAG-designer</dc:title><dc:creator>Ismail Ahmat Mahadi</dc:creator><dc:creator>Jabbar Al-Fattah Yahaya</dc:creator><dc:subject>inductive power transfer</dc:subject><dc:subject>wireless power transfer</dc:subject><dc:subject>coil turns</dc:subject><dc:subject>output power</dc:subject><dc:subject>power transfer efficiency</dc:subject><dc:subject>air gap length</dc:subject><dc:subject>resonant frequency</dc:subject><dc:subject>electromagnetic simulation</dc:subject><dc:description xml:lang="en">Due to its advantage of sending electrical power from the transmitter source to the receiver load with no physical contact, wireless power transfer (WPT) has rapidly gained popularity in recent years. They can be used in a variety of applications, including induction cooking, mobile phone charging, radio frequency identification (RFID), and electric vehicles (EVs). Using JMAG-designer, a simulation of series-parallel inductive power transmission has been investigated in this research. This study aims to determine how the output power and efficiency change depending on how many coils turn in the transmitter and receiver. The number of coils turn in the transmitter is fixed which is 20 turns, the number of coils turn in the receiver is variable and ranges between 15 and 30, and the air gap or distance between the coupling coils is set at 10 cm. The selected frequency to be used in this simulation is between 10 and 50 kHz. According to the absorption result, the output power and efficiency rise when the receiver has more coil turns than the transmitter, and the output power and current rise along with an increase in resonance frequency.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2022-11-07</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v12i1.3570</dc:identifier><dc:identifier>10.11591/eei.v12i1.3570</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 12 No 1 (2022); 33-41</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/3570/3113</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat ID karya OpenAlex (record dari sumber OpenAlex)
1 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 19 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Mahadi, I. A., & Yahaya, J. A. F. (2022). Performance analysis of inductive power transfer using JMAG-designer. Bulletin of Electrical Engineering and Informatics, 12(1), 33–41. https://doi.org/10.11591/eei.v12i1.3570
Salin
IEEE
I. A. Mahadi and J. A. F. Yahaya, “Performance analysis of inductive power transfer using JMAG-designer,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 1, pp. 33–41, 2022, doi: 10.11591/eei.v12i1.3570.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.