Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Determination analysis of main dimensions of induction motors for railway propulsion system

Bulletin of Electrical Engineering and Informatics · Vol. 14 No. 3 (2025) · hlm. 1727–1734

DOI
10.11591/eei.v14i3.8554
ISSN
2089-3191, 2302-9285
Terbit
2025-05-02
Penerbit
Institute of Advanced Engineering and Science (IAES)
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

Induction motors are used in industrial production processes. As for its use as a traction motor, it requires special design and manufacture. The type of induction motor that is widely chosen as a traction motor for railways is a squirrel-cage three-phase induction motor. The main consideration for the selection or design of an induction motor as a railway traction motor is the torque requirement to drive the train. Other parameters that are considered in the selection of an induction motor as a traction motor include available spaces for installation. This research is using a three-phase, 2,300 VAC, 480 kW, and 50 Hz induction motor. By using the application program for determining the parameters of the induction motor, it shows that the motor produces a moderate output coefficient (between maximum and minimum) and produces a torque greater than induction motor torque in general. As a result of the analysis, this induction motor is suitable to be used as a motor for the railway, where greater torque is required.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 101 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tri WidodoNational Research and Innovation Agency10
Respatya Teguh SoewonoNational Research and Innovation Agency5
Fauzi Dwi SetiawanNational Research and Innovation Agency5
Mulyadi Sinung HarjonoNational Research and Innovation Agency5
Heru BasukiAfiliasi tidak diketahui5
Sahid BismantokoNational Research and Innovation Agency2
Mohammad RosyidiNational Research and Innovation Agency2
Tri Wahyu WidodoNational Research and Innovation Agency1
Umi ChasanahNational Research and Innovation Agency1
Gilang Mantara PutraNational Research and Innovation Agency1
Djoko Wahyu KarmiadjiNational Research and Innovation Agency1
Harris ZaenalNational Research and Innovation Agency1
Nofriyadi NurdamNational Research and Innovation Agency1
Andi Muhdiar KadirNational Research and Innovation Agency1
Nurhadi PramanaNational Research and Innovation Agency1
Winarno WinarnoNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765016208, pertama di-harvest 19 Nov 2026, terakhir terlihat 19 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Determination analysis of main dimensions of induction motors for railway propulsion system</dc:title><dc:creator>Syamsul Kamar</dc:creator><dc:creator>Meiyanne Lestari</dc:creator><dc:creator>Hilda Luthfiyah</dc:creator><dc:creator>Okghi Adam Qowiy</dc:creator><dc:creator>Eko Syamsuddin Hasrito</dc:creator><dc:creator>Sofwan Hidayat</dc:creator><dc:subject>induction motor</dc:subject><dc:subject>railway traction motors</dc:subject><dc:subject>motor selection</dc:subject><dc:subject>torque requirements</dc:subject><dc:subject>motor design parameters</dc:subject><dc:subject>railway traction</dc:subject><dc:description xml:lang="en">Induction motors are used in industrial production processes. As for its use as a traction motor, it requires special design and manufacture. The type of induction motor that is widely chosen as a traction motor for railways is a squirrel-cage three-phase induction motor. The main consideration for the selection or design of an induction motor as a railway traction motor is the torque requirement to drive the train. Other parameters that are considered in the selection of an induction motor as a traction motor include available spaces for installation. This research is using a three-phase, 2,300 VAC, 480 kW, and 50 Hz induction motor. By using the application program for determining the parameters of the induction motor, it shows that the motor produces a moderate output coefficient (between maximum and minimum) and produces a torque greater than induction motor torque in general. As a result of the analysis, this induction motor is suitable to be used as a motor for the railway, where greater torque is required.</dc:description><dc:publisher>Institute of Advanced Engineering and Science (IAES)</dc:publisher><dc:date>2025-05-02</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/eei.v14i3.8554</dc:identifier><dc:identifier>10.11591/eei.v14i3.8554</dc:identifier><dc:source>Bulletin of Electrical Engineering and Informatics; Vol 14 No 3 (2025); 1727-1734</dc:source><dc:source>2089-3191</dc:source><dc:source>2302-9285</dc:source><dc:language>en</dc:language><dc:relation>https://beei.org/index.php/EEI/article/download/8554/4196</dc:relation><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>